Thank you so much for a brilliant and thoughtful review of this Elna machine. I have been researching semi-industrial machines and until I watched your review on Elna EF1, I was considering the JUKI TL- 2010Q. I appreciate your work to bring the features and strengths of the Elna. The same features that you that important are the same I find invaluable. Again thank you!!!
So glad this was helpful to you :) You may have seen I did a review of the Juki TL2010Q as well, if you need further comparison or thoughts… you may find that video insightful too. Ultimately, I did favor the Elna the most out of 3 machines reviewed here in the same series. The Juki scored the lowest for me of the 3. I hope you end up with a machine that you love! ❤️ thanks for watching and commenting!!
I just purchased and so far i like it. I have a Brother product. Not that i can compare as you did but i am coming from a Bernina history. Each of my machines are for very different purposes. And each have value. I can not and will not say i was disappointed in my last purchase. I would say Juki is a great semi industrial. My experience was positive and will rate it with 5 stars. I wanted industrial but dont have the room, at this point. I am satisfied. Thought the $$ vs ability was a great value. Just my opinion.
Minor terminology correction: a compensating foot has a split base where the left and right half can move independently. The feet with two different length toes are just regular straight stitch feet. Also the foam on the thread stand isn't packaging, it's supposed to be there to keep thread spools from sliding around. Not a big deal if you don't use it, though.
Love my TL2010Q. I added one of the Madame Sew light strips to solve the lighting problem. That is the ONLY criticism I have after sewing with this machine for over 3 years.
I’m surprised you didn’t fix the bobbin thread but kept on sewing. I’ve been told by a very knowledgeable sewist if it hasn’t been winded correctly, it can affect the stitches and tension. Probably would have had better results with a bobbin correctly winded. Needle threader on my Singer domestic machine is on the left side I find a bit bulky. It gets in the way when I try to sew a bulky item. The more I watch Juki reviews, the more I want it! I love how it sounds too.
My Juki works like a dream if you turn the tension on the op of the machine you will have better results the bobbins on mine wind perfectly every time also you need the correct needle for heavy threads
The tension on the top stitch is determined by the tension on the bobbin case. The bobbin thread tension is determined by the tension button on the machine.
I added a light strip, but when I was quilting large quilts the light strip pulled off. I have been trying other things to light up that inner area and some are more successful than others. I have not been able to use the needle threader successfully even after I replaced it. It’s so sensitive that it takes longer to get it aligned properly than it does to just thread it manually. It’s amazing at regular and free motion quilting and nothing can beat it for piecing.. With all that said, I love my Juki better than my Bernina, Janome, or BabyLock. I bought a carrier with wheels so when I travel, the weight is not a big deal.
I am wondering if you had a bad machine? I have this machine and it is phenomenal. It makes absolutely no humming noise whatsoever. Also, I have heard that the thread cutter on this particular machine is not meant to be used with heavy threads or tex 45. I agree that the lighting could be better, but I have easily solved that. I have heard that the step up machine has much better lighting. My machine is set down into a sewing desk. Anyone that does any amount of sewing will find that that makes sewing so much easier. I only use the table if I’m on a retreat, and for me, the sewing table works fine.
Thank Dan. Definitely could be. I know some people are either team Juki very strongly or they are just not that into them. As for me, I think they just may not be my preference and that’s okay. So many choices out there :) I had tried a couple of juki industrials when I was shopping for mine and I also didn’t think they were for me. I decided on a different brand that works great for me and was half the cost with more features. The beauty of choice is that there are so many and one for everyone’s preferences :D
I’ve got a Janome mc6700p and you should see the paths over I got for that machine. It s cheap vinyl thing with a janome logo on it that’s it. I got an amazing cover sort of like that one on my singer patchwork. Considering it MSRP for 3,800 bucks you’d think they could give u a descent cover. Good job Juki
I have the TL-18, the top of the Juki TL line. It took me a while to get used to it, but I really love it - and all the TLs now. The table does not slip at all. I love it! My only 2 complaints on the Juki TLs are the lighting (even the improved lighting on the TL-18) and the needle threader. I work and teach at a Janome/Elna, Brother/Babylock, Juki dealership. The needle threader is absolutely frustrating, and I finally gave up on it. The bobbin case needs to be adjusted for Tex thread. Some people purchase a second bobbin case adjusted just for Tex thread.
@Fattiapples - absolutely! I love my Juki TL-18 and all the feet that come with it! (And if you quilt, let me suggest that you get the Left Compensating Foot. The Right Compensating Foot comes with the TL18. You can use it to attach your binding to the back of the quilt. Then, use the Left Compensating Foot to attach the binding to the front of the quilt. It makes the most beautiful, straight, unwavering stitch line. I also added the Ditch Foot. My ditch quilting looks so professional using that foot! The last foot I added was the Ruler Foot. I teach ruler foot quilting, and the TL18 is perfect for that and free motion quilting.
@Fattiapples - The Ef1 is a great machine, but it doesn't come with an extension table or a knee lift. I don't know which feet come with it. AND none of the other straight stitch machines, including the other Juki TLs, come with the microlifter that the TL18 has. The microlifter is a game changer for Ruler Foot Quilting, Free Motion Quilting, and, I understand, for bag making!
I just got mine and clear vinyl with tex 45 did not go well! I switched to a jelly, instead and it was fine with that. But I couldn't figure out the clear!
Just FYI Juki advises NOT using the thread cutter on thread heavier than 30 weight. That's why you are getting the grinding noise and poor performance-the thicker threads need to be cut with the manual cutter on the side or with scissors. They also recommend topstitch needles (bigger eye) with this type of thread - having a mismatch between thread size and needle size can cause all sorts of issues / machine sounding unhappy.
I use tex 70 nylon thread upper and in the bobbin. The first thread tension, should the be flush. (The knob and metal rod even with each other. I put old cutting mat under my machine which lesson the noise and helped with moving the machine. I use this machine everyday Sewing vinyl, leather, cork and cotton. I love it.
I use a size 18 Schmetz Leather Home Machine Needles - 15x1, 130/705 H LL - 5/Pack from Wawak 70 tex thread. I did buy another bobbin case for tex thread. I also purchased the large needle plate for large needles. Juki Junkies was my source for information of what thread, needles, bobbin case and large needle plate. They are an awesome family owned business.
I love your honest reviews. I watched both the Juki and Brither. I am in the market for a semi industrial machine and your videos are super helpful. I’m wondering if you would do one for the Janome HD9. It’s more expensive, but would like to know if it’s worth the money. Thank you so much. I love your channel. ❤
I have one more video in the series and it’s a sister to the HD9. While I didn’t try the HD 9 itself I found this other machine (video yet to release) and it was a bit cheaper than the hd9 with the same/similar features and it’s the same sited company. That machine will come out soon and I hope it’s helpful. I ended up picked that machine and I love it!
Thank you for your reply! Is this the machine that you use in your makes? I would love to buy a semi-industrial. I’m a Janome user and I love my machine, but need something that can sew my vinyl bags with ease. I love your videos, and your new tags! 😉🤗❤️
Thanks for your nice feedback. I understand that you are really very talented in this subject, please give me another suggestion I don't need a sewing machine design. I will sew vine leaf flowers and round designs using free motton. So which sewing machine should be purchased for me at a low price
I’ve noticed you left a lot of comments, many of them asking questions I don’t have answers for, beyond what is posted in the videos here. I hope you find the right answers for you and your sewing journey though :) Thanks for tuning in ❤️
I did not end up keeping this machine as I didn’t care for it but since it did have some struggles I can safely say that I would 100% want a walking foot for it on knits, if I were still using it. For needles, I always change to a ball point needle whenever I sew knits to avoid runs/rips in my fabrics, regardless of machine :)
I'm an old greybeard sewing machine guy and for the last few months I've been watching quite a few sewing machines videos. Your reply on ball point needles is dead on and the first mention of them yet. Why do problems come up sewing knits? Skipped stitches and snaging. Especially on a zigzag machine. The hole in the pressure foot and needle plate are elongated to accommodate the zjg zag. Knits are very flexible and even on a properly working machine you can have this problem because the fabric is sticking to the needle lightly and the excess room of the zig zag foot and plate allow the fabric to flex up and down with the needle and in turn holds the thread tight with the needle instead of forming a slight loop for the hook to engage. Skipped stitch. For straight stitching knits, change the needle, foot, and plate. After that long-winded explanation, I need a nap.
It didn’t. I kept the machine for a while and it just did not perform well. I have also taught some bag making classes on this same machine as well as used it as a rental at retreats and it just did not perform that great. It’s not a bag making machine- it’s a straight stitch quilting machine and while it’s okay, it just does not do great with bulk, with lots of layers of vinyl or many of the things we run into as bag makers. The score it earned is accurate. Of course, it’s all opinion based but if you search fb groups you will see others either feel like I do, or they claim to love it and say they never have an issue. However, having been in a room with 45 of these machines and everyone having the same issues tells me it’s not a one time thing… it’s this machine. In another review video, I did the same tests with the Elna ef1 (which scored much higher than this Juki and I ended up keeping) the Elna does not have any of the struggles this Juki has. A far superior sewing experience for bag making. I adore the Elna and the experience and sewing quality is FAR better than this machine. Hope that helps. Happy sewing.
![Jack Harlow - Hello Miss Johnson [Official Music Video]](http://i.ytimg.com/vi/Q86_nlRoIGw/mqdefault.jpg)
Thank you so much for a brilliant and thoughtful review of this Elna machine. I have been researching semi-industrial machines and until I watched your review on Elna EF1, I was considering the JUKI TL- 2010Q. I appreciate your work to bring the features and strengths of the Elna. The same features that you that important are the same I find invaluable. Again thank you!!!
So glad this was helpful to you :) You may have seen I did a review of the Juki TL2010Q as well, if you need further comparison or thoughts… you may find that video insightful too.
Ultimately, I did favor the Elna the most out of 3 machines reviewed here in the same series. The Juki scored the lowest for me of the 3.
I hope you end up with a machine that you love! ❤️ thanks for watching and commenting!!
Same! I came to say the same things! Thank you
I just purchased and so far i like it. I have a Brother product. Not that i can compare as you did but i am coming from a Bernina history. Each of my machines are for very different purposes. And each have value. I can not and will not say i was disappointed in my last purchase. I would say Juki is a great semi industrial. My experience was positive and will rate it with 5 stars. I wanted industrial but dont have the room, at this point. I am satisfied. Thought the $$ vs ability was a great value. Just my opinion.
The industrial machines are cheaper DDL-9000C DDL-8700, But require too much space and 220V AC.😢😮😢😢
I would love to see you review the Baby Lock Accomplish! I have really appreciated your insight on these two machines. Thanks very much!
Minor terminology correction: a compensating foot has a split base where the left and right half can move independently. The feet with two different length toes are just regular straight stitch feet.
Also the foam on the thread stand isn't packaging, it's supposed to be there to keep thread spools from sliding around. Not a big deal if you don't use it, though.
Love my TL2010Q. I added one of the Madame Sew light strips to solve the lighting problem. That is the ONLY criticism I have after sewing with this machine for over 3 years.
I’m surprised you didn’t fix the bobbin thread but kept on sewing. I’ve been told by a very knowledgeable sewist if it hasn’t been winded correctly, it can affect the stitches and tension. Probably would have had better results with a bobbin correctly winded.
Needle threader on my Singer domestic machine is on the left side I find a bit bulky. It gets in the way when I try to sew a bulky item. The more I watch Juki reviews, the more I want it! I love how it sounds too.
My Juki works like a dream if you turn the tension on the op of the machine you will have better results the bobbins on mine wind perfectly every time also you need the correct needle for heavy threads
It sounds so lovely and smooth.
How many stitches this machine have?
Good review I’m deciding between the 2 today ….others have said the same thing you have mentioned
The tension on the top stitch is determined by the tension on the bobbin case. The bobbin thread tension is determined by the tension button on the machine.
I added a light strip, but when I was quilting large quilts the light strip pulled off. I have been trying other things to light up that inner area and some are more successful than others. I have not been able to use the needle threader successfully even after I replaced it. It’s so sensitive that it takes longer to get it aligned properly than it does to just thread it manually. It’s amazing at regular and free motion quilting and nothing can beat it for piecing.. With all that said, I love my Juki better than my Bernina, Janome, or BabyLock. I bought a carrier with wheels so when I travel, the weight is not a big deal.
I am wondering if you had a bad machine? I have this machine and it is phenomenal. It makes absolutely no humming noise whatsoever. Also, I have heard that the thread cutter on this particular machine is not meant to be used with heavy threads or tex 45. I agree that the lighting could be better, but I have easily solved that. I have heard that the step up machine has much better lighting. My machine is set down into a sewing desk. Anyone that does any amount of sewing will find that that makes sewing so much easier. I only use the table if I’m on a retreat, and for me, the sewing table works fine.
Thank Dan. Definitely could be. I know some people are either team Juki very strongly or they are just not that into them. As for me, I think they just may not be my preference and that’s okay. So many choices out there :) I had tried a couple of juki industrials when I was shopping for mine and I also didn’t think they were for me. I decided on a different brand that works great for me and was half the cost with more features.
The beauty of choice is that there are so many and one for everyone’s preferences :D
I have a Babylock Brilliant, mainly used for quilting but NOT only… and I find the machine BRILLIANT !!!
Maybe sometimes you could review this model.
I’ve got a Janome mc6700p and you should see the paths over I got for that machine. It s cheap vinyl thing with a janome logo on it that’s it. I got an amazing cover sort of like that one on my singer patchwork. Considering it MSRP for 3,800 bucks you’d think they could give u a descent cover. Good job Juki
Thank you!!! It was very!!!! helpful!
I love my Juki and I bought the tl15. My previous machine was a Jaome
I have the TL-18, the top of the Juki TL line. It took me a while to get used to it, but I really love it - and all the TLs now. The table does not slip at all. I love it!
My only 2 complaints on the Juki TLs are the lighting (even the improved lighting on the TL-18) and the needle threader. I work and teach at a Janome/Elna, Brother/Babylock, Juki dealership. The needle threader is absolutely frustrating, and I finally gave up on it.
The bobbin case needs to be adjusted for Tex thread. Some people purchase a second bobbin case adjusted just for Tex thread.
you prefer the TL-18 vs janome 1600/elna ef1?
@Fattiapples - absolutely! I love my Juki TL-18 and all the feet that come with it! (And if you quilt, let me suggest that you get the Left Compensating Foot. The Right Compensating Foot comes with the TL18. You can use it to attach your binding to the back of the quilt. Then, use the Left Compensating Foot to attach the binding to the front of the quilt. It makes the most beautiful, straight, unwavering stitch line. I also added the Ditch Foot. My ditch quilting looks so professional using that foot! The last foot I added was the Ruler Foot. I teach ruler foot quilting, and the TL18 is perfect for that and free motion quilting.
@Fattiapples - The Ef1 is a great machine, but it doesn't come with an extension table or a knee lift. I don't know which feet come with it. AND none of the other straight stitch machines, including the other Juki TLs, come with the microlifter that the TL18 has. The microlifter is a game changer for Ruler Foot Quilting, Free Motion Quilting, and, I understand, for bag making!
@@debraewing2859 thank you so much for your in depth response! ☺️ I may go for juki then!
I love mine! My only frustration is tension setting with TEX 45 threads, and clear vinyl.
I second that!
I just got mine and clear vinyl with tex 45 did not go well! I switched to a jelly, instead and it was fine with that. But I couldn't figure out the clear!
Thank you for the review, very helpful!
Just FYI Juki advises NOT using the thread cutter on thread heavier than 30 weight. That's why you are getting the grinding noise and poor performance-the thicker threads need to be cut with the manual cutter on the side or with scissors. They also recommend topstitch needles (bigger eye) with this type of thread - having a mismatch between thread size and needle size can cause all sorts of issues / machine sounding unhappy.
I use tex 70 nylon thread upper and in the bobbin. The first thread tension, should the be flush. (The knob and metal rod even with each other. I put old cutting mat under my machine which lesson the noise and helped with moving the machine. I use this machine everyday Sewing vinyl, leather, cork and cotton. I love it.
Curious… what is the biggest size needle and thread that can be used? I am considering buying a machine that can handle more layers. Thanks
I use a size 18 Schmetz Leather Home Machine Needles - 15x1, 130/705 H LL - 5/Pack from Wawak 70 tex thread. I did buy another bobbin case for tex thread. I also purchased the large needle plate for large needles. Juki Junkies was my source for information of what thread, needles, bobbin case and large needle plate. They are an awesome family owned business.
I love your honest reviews. I watched both the Juki and Brither. I am in the market for a semi industrial machine and your videos are super helpful. I’m wondering if you would do one for the Janome HD9. It’s more expensive, but would like to know if it’s worth the money.
Thank you so much. I love your channel. ❤
I have one more video in the series and it’s a sister to the HD9. While I didn’t try the HD 9 itself I found this other machine (video yet to release) and it was a bit cheaper than the hd9 with the same/similar features and it’s the same sited company. That machine will come out soon and I hope it’s helpful. I ended up picked that machine and I love it!
Thank you for your reply! Is this the machine that you use in your makes? I would love to buy a semi-industrial. I’m a Janome user and I love my machine, but need something that can sew my vinyl bags with ease.
I love your videos, and your new tags! 😉🤗❤️
@@EmporiumThreadswhen is your video? Is the machine already available? I’m hoping to make a purchase soon and appreciate your reviews!
i would have enjoyed hearing you finish the project without the music overlay - nice to hear the sewing sound of the machine
The foot that comes on the machine is a scant 1/4" foot.
I love juki I wish I have one that is my favourite the best
Thanks for your nice feedback. I understand that you are really very talented in this subject, please give me another suggestion
I don't need a sewing machine design. I will sew vine leaf flowers and round designs using free motton.
So which sewing machine should be purchased for me at a low price
I’ve noticed you left a lot of comments, many of them asking questions I don’t have answers for, beyond what is posted in the videos here.
I hope you find the right answers for you and your sewing journey though :)
Thanks for tuning in ❤️
Hi, thanks for the review. Just wondering have you tried knit fabric on that machine? Does the foot need to be changed along with the needle?
I did not end up keeping this machine as I didn’t care for it but since it did have some struggles I can safely say that I would 100% want a walking foot for it on knits, if I were still using it. For needles, I always change to a ball point needle whenever I sew knits to avoid runs/rips in my fabrics, regardless of machine :)
I'm an old greybeard sewing machine guy and for the last few months I've been watching quite a few sewing machines videos.
Your reply on ball point needles is dead on and the first mention of them yet. Why do problems come up sewing knits? Skipped stitches and snaging. Especially on a zigzag machine. The hole in the pressure foot and needle plate are elongated to accommodate the zjg zag. Knits are very flexible and even on a properly working machine you can have this problem because the fabric is sticking to the needle lightly and the excess room of the zig zag foot and plate allow the fabric to flex up and down with the needle and in turn holds the thread tight with the needle instead of forming a slight loop for the hook to engage. Skipped stitch. For straight stitching knits, change the needle, foot, and plate.
After that long-winded explanation, I need a nap.
Great review, thanks 👍
Thanks for watching!
@@EmporiumThreads 👍🙂
Are you able to sew nylon, spandex and jersey without any problem?
Thanks for the video,
Nice review
How does it deal with lightweight slippery fabric, eg silk satin?
I don’t work with those fabrics so unfortunately I didn’t test those. Sorry!
@@EmporiumThreads thank you for your response!
What is the biggest difference between tl 2010 and tl2000qi??
Which Juki sews zig zag stitches?
I wish you would have wound another bobbin so we could see if it fixed the stitching.
It didn’t. I kept the machine for a while and it just did not perform well.
I have also taught some bag making classes on this same machine as well as used it as a rental at retreats and it just did not perform that great.
It’s not a bag making machine- it’s a straight stitch quilting machine and while it’s okay, it just does not do great with bulk, with lots of layers of vinyl or many of the things we run into as bag makers.
The score it earned is accurate.
Of course, it’s all opinion based but if you search fb groups you will see others either feel like I do, or they claim to love it and say they never have an issue.
However, having been in a room with 45 of these machines and everyone having the same issues tells me it’s not a one time thing… it’s this machine.
In another review video, I did the same tests with the Elna ef1 (which scored much higher than this Juki and I ended up keeping) the Elna does not have any of the struggles this Juki has. A far superior sewing experience for bag making.
I adore the Elna and the experience and sewing quality is FAR better than this machine.
Hope that helps. Happy sewing.
I think that foam pad you took off was supposed to stay in place for your thread to sit on. I've never taken that off.
You can use it with or without. I use a felt pad on a different machine because it works better but in this case, I opted to not use it :)
That was a very frustrating review. Its a high speed machine and you were sewing at the slowest speed possible.
It’s definitely not the machine. Perhaps you should try again.
No thank you but thanks for the engagement on my video 🙃
This must be a chines made version. Could you confirm that?
Japan, not China.