Maybe this little tip may help others that see this video. Most people looking at this video won't have an air compressor or nice specific tools like that as they are only going to do the one job! There should be plenty enough tension already on the water pump pulley with the belt still on. Place your fan wrench on and give it a few short but sharp strikes with a soft hammer or a ball peen hammer. The repeated quick sharp taps will in "most" cases free the fan nut from the water pump and the fan nut should then be simple to undo by rotating the entire fan/clutch assembly. Remove the fan and clutch. Remove the belt and service/replace the water pump as needed. Reverse the procedure to re-install. Add some anti-seize to the pump threads and install the fan and clutch. Hand snug the fan clutch nut and use the wrench by giving it a few quick strikes the lock it tight! Oh and just one more thing. You don't absolutely need a special wrench. A proper sized box wrench or a larger adjustable wrench will work very well! Cheers
Great tool. I have a 5.9 Dakota, where the clutch has been locking-up, in hot weather, on start-up. I will the buy the kit. May not need it, for another 19 years. Tanks, for video, very informative and better than a hammer & 36 mm wrench.
This was the most helpful and well produced video I have seen to removed the fan clutch. This will save tons of time. Very well understood and shown so anyone can accomplish this. Thank you, my friend.
Having the right tools for the job always makes it way much easier, I had to learn the hard way lol great video brother and keep up the good work god bless.
Thanks for the video. Just did this replacement. FYI the water pump pulley was slipping on the belt so I put a big c clamp around it and the belt to hold it. Worked great.
Now that is the slickest way I seen it done thank you so much for sharing this info I always do it the hard way trying to hold the pulley with something and pipe wrench on the nut very awesome you the man
Best one I saw is a short piece of chain around one of the pulley bolts and a nearby bolt, so the pulley can't turn. Then put a big wrench on, after a little WD 40 soak and kit the wrench with a hammer if normal force won't work. Pulling hard, or a pipe on the wrench is recommended before hitting a wrench with a hammer.
Just a hint: Some fan clutches are left hand thread. Many cars have it marked on the fan shroud if it is. You can also look at the new fan clutch to see the thread.
Thanks for the vid! I was scratching my head over getting the fan off my Jeep without messing around or fucking stuff up. For a weekend mechanic, Matco would be overkill just to do my jeep. All I need is one wrench size. With some googling, Amazon came up with a single Lisle wrench head in the size I need, bar, and IR impact hammer all in one package for like 100 bucks. I've been needing a decent impact hammer anyway for other stuff.
I guess im asking randomly but does any of you know of a trick to get back into an Instagram account..? I somehow lost my login password. I appreciate any tricks you can offer me.
@Tripp Justice i really appreciate your reply. I got to the site thru google and im waiting for the hacking stuff atm. Takes quite some time so I will reply here later when my account password hopefully is recovered.
I'm encourage now, I'm changing my water pump, it's to expensive to get someone to do it, I used to worked on cars but since I lost my sight I have not done any work what so ever, now that I can see better; m doing this, any who thank you
I will be replacing my clutch fan with a electric fan. When I remove it do I need to put any kind of nut back on or anything else if its not being replaced ? Thank you Joe
If you have the air hammer and compressor but not the 36mm wrench and bar just grind a bit to a sharp point. SeT it on the left side of the nut and TAP the trigger to make an indentation. Do not pull the trigger and hold it! Once you have an indentation lean the hammer to your right with the bit in the indentation. TAP the trigger. The nut is loose.
Will it hurt anything if you turn it clockwise when aligning nut and tightening? My 5.4 idles rough now, hoping it did not jump time. Its important not to rotate backwards when tightening.
2010 colorado..trying to get fan clutch off..I took the 4 bolts off...will the clutch come off or does a bolt need to be on there to prevent something from spinning ?
I was wondering about when you take your fan clutch off do you need to stand it up or lay it down because I was always told to stand it up because fluid inside the fan clutch would mess up, is that right?
I have the 36mm Wrench and a Air Hammer and a impact wrench but where did you get the bar to hook into the end of the 36mm wrench? Is this special wrench and Bar in a kit that allows you torque like that? Please tell me what kind of kit that was and where can I buy one?
Question: if I don't replace the water pump right away what other damage can occur to the engine it over heats pass the half way mark but not to the red, 95 dodge ram 1500.
going through the same problem right now with my 2500. definitely get that taken care of asap, especially if adding coolant to the radiator isn't working anymore. there's a good chrysler waterpump video on youtube if you search your year and model.
So u don't need a tool to hold the nuts and keep it from spining? Will thins work with a 20 year old never replace water pump rusted and what the min size psi and air tank for this tool
I dont know man. I guess im poor. Huge cresent wrench and a 3lb hammer. Make sure your going the correct direction. Keep tapping, the shock will break it loose. For me, everytime. No, I don't remove the belt till its off. I can imagine if you dont know what your doin you could really f things up doing this but maybe ive just been lucky
Yeah, I mean, that may be a great investment when you have a business, expense account, and when time is money. But for us at home, a wrench and hammer will certainly do. I plan to borrow the tool from the car store though...or maybe I will just buy the crescent wrench🤔
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level. remove it with the fan
I have a 95 ford e150 I can't find a wrench to fit in there it's a 1 5/8ths any ideas how to get it off? Can i just take the entire water pump off without removing fan?
Hmmm...$220 for a matco removal tool, or $70 for a brand new fan assembly 🤔....I can see if you use them everyday, but not for somebody watching RUclips videos to fix their stuff
You still have to take it off. I am trying to replace a fan clutch on a Ranger and I don't think there is another way to do this. I agree its a lot of money in tools but that's how one ends up with so many tools.
Maybe this little tip may help others that see this video.
Most people looking at this video won't have an air compressor or nice specific tools like that as they are only going to do the one job!
There should be plenty enough tension already on the water pump pulley with the belt still on. Place your fan wrench on and give it a few short but sharp strikes with a soft hammer or a ball peen hammer. The repeated quick sharp taps will in "most" cases free the fan nut from the water pump and the fan nut should then be simple to undo by rotating the entire fan/clutch assembly.
Remove the fan and clutch. Remove the belt and service/replace the water pump as needed.
Reverse the procedure to re-install. Add some anti-seize to the pump threads and install the fan and clutch. Hand snug the fan clutch nut and use the wrench by giving it a few quick strikes the lock it tight!
Oh and just one more thing. You don't absolutely need a special wrench. A proper sized box wrench or a larger adjustable wrench will work very well!
Cheers
Well ma'am, on behalf of everyone you speak of.... We appreciate you.
Great tool. I have a 5.9 Dakota, where the clutch has been locking-up, in hot weather, on start-up. I will the buy the kit. May not need it, for another 19 years. Tanks, for video, very informative and better than a hammer & 36 mm wrench.
This was the most helpful and well produced video I have seen to removed the fan clutch. This will save tons of time. Very well understood and shown so anyone can accomplish this. Thank you, my friend.
You're welcome! thanks for watching and please like share and subscribe.
You a bad man bo! Working on em while it’s on the wheel lift I like that.
Great video brotha. U explained shit perfectly for another Joe like me to understand. Straight to the point too. Thanks a lot.
This video saved my husband SO much time and aggravation. The method of hitting it on the top is what does the trick. Thank you so much
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level.
Dude, you are great!! you need some staff so you can get better angles.. But thanks for being so clear and concise!!!
My words exactly! He's a natural teacher.
Having the right tools for the job always makes it way much easier, I had to learn the hard way lol great video brother and keep up the good work god bless.
Thanks for the video. Just did this replacement. FYI the water pump pulley was slipping on the belt so I put a big c clamp around it and the belt to hold it. Worked great.
Glad it helped please subscribe, and share and watch the rest of the series thanks
Pneumatic always beats the hell out of removing things by hand. Great video buddy. Have never heard of this tool before. I'll have to look into this
Thanks for the visit please subscribe
Now that is the slickest way I seen it done thank you so much for sharing this info I always do it the hard way trying to hold the pulley with something and pipe wrench on the nut very awesome you the man
Thanks for the visit please subscribe
Didnt even know they made a tool for that. I just used a large wrench and a hammer. Good to know. Just got to get one now
Best one I saw is a short piece of chain around one of the pulley bolts and a nearby bolt, so the pulley can't turn. Then put a big wrench on, after a little WD 40 soak and kit the wrench with a hammer if normal force won't work. Pulling hard, or a pipe on the wrench is recommended before hitting a wrench with a hammer.
Thank you for showing this video I can now finish this project 🙌
I love it when i see someone that knows what they are doing, uses the right tool for the job tip my snapon hat to you
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level.
just tried your idea......works like a charm...best idea ever,2 thumbs up!.....though it costed me a bloody thumb.
I hope that's not literal😯
Great video bro ,clear as a whistle ,thanks man
Thanks for the visit please subscribe
Just a hint: Some fan clutches are left hand thread. Many cars have it marked on the fan shroud if it is. You can also look at the new fan clutch to see the thread.
Thanks for posting this video. You convinced me.
Thanks for the vid! I was scratching my head over getting the fan off my Jeep without messing around or fucking stuff up. For a weekend mechanic, Matco would be overkill just to do my jeep. All I need is one wrench size. With some googling, Amazon came up with a single Lisle wrench head in the size I need, bar, and IR impact hammer all in one package for like 100 bucks. I've been needing a decent impact hammer anyway for other stuff.
I guess im asking randomly but does any of you know of a trick to get back into an Instagram account..?
I somehow lost my login password. I appreciate any tricks you can offer me.
@Bryan Josue instablaster =)
@Tripp Justice i really appreciate your reply. I got to the site thru google and im waiting for the hacking stuff atm.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@Tripp Justice it did the trick and I now got access to my account again. I'm so happy:D
Thank you so much you really help me out !
@Bryan Josue glad I could help :D
thats awesome! tools i never knew i needed lol. Thank you sir!
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level.
pretty slick 👍🏼
Yo my man 🫡💪💯thank you for the video G
I'm encourage now, I'm changing my water pump, it's to expensive to get someone to do it, I used to worked on cars but since I lost my sight I have not done any work what so ever, now that I can see better; m doing this, any who thank you
Thanks for the video!!!
I like your approach to explaining. how about if you don't have the special tool and an air hammer.
Thanks for the visit please subscribe
That was a huge help. Thank you
Jason Pronti
I will be replacing my clutch fan with a electric fan. When I remove it do I need to put any kind of nut back on or anything else if its not being replaced ? Thank you Joe
What is the tool you used to remove the fan nut? Thanks for the video!
Bro, as a courtesy wipe the corners of your before filming. . . 😱
And stop saying I'm every 3 seconds
😂😂😂😂😂😂😂😂😂😂😂😂😂😂🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
I came here to say the same thing.
If you have the air hammer and compressor but not the 36mm wrench and bar just grind a bit to a sharp point. SeT it on the left side of the nut and TAP the trigger to make an indentation. Do not pull the trigger and hold it! Once you have an indentation lean the hammer to your right with the bit in the indentation. TAP the trigger. The nut is loose.
Will it hurt anything if you turn it clockwise when aligning nut and tightening? My 5.4 idles rough now, hoping it did not jump time. Its important not to rotate backwards when tightening.
What if there's no belt to hold the pulley tight?
What do I do if the pulley is spinning with it?
Great video but how did you remove the shroud
great video thanks man.
Can you do a video on how to replace a water pump on a 2004 Chevy Trailblazer?
2010 colorado..trying to get fan clutch off..I took the 4 bolts off...will the clutch come off or does a bolt need to be on there to prevent something from spinning ?
Worked great, thanks!
Glad it helped!
Holy cow, magnificent.
Thanks!!
Hey, can I get a link to that tool that you used with air attachment, please?
Thanks man
Where can you get these tools local and for a reasonable price? You know if harbor freight sells any of these?
Dayuuuummm , I just spent 40mins breaking this same bolt.
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level.
You are the man! Thank you!
I have an H2 Hummer 2005.How do I know what size wrench I need
Thank you, please like, share, and subscribe, also check out my other channel Salem Taxi on RUclips
THx..im goin now 2 buy me th(1) air impact wrench(2)special
Wrench/bar & (3) Air-Compressor, hope it DON'T RUN over$1000bucks.
Awesome!! Thx
Good job
Where do I get this tool?
I was wondering about when you take your fan clutch off do you need to stand it up or lay it down because I was always told to stand it up because fluid inside the fan clutch would mess up, is that right?
Lol to funny
I have the 36mm Wrench and a Air Hammer and a impact wrench but where did you get the bar to hook into the end of the 36mm wrench? Is this special wrench and Bar in a kit that allows you torque like that? Please tell me what kind of kit that was and where can I buy one?
air hammer fan clutch removal tool
Normal people dont have an air gun. Mechanics have them and mechanics dont need instructional videos on how to use them.
THANKS FOR WATCHING !!!! Please like share and subscribe, also check my other channel, Salem Taxi on YOU TUBE . Thanks.
Question: if I don't replace the water pump right away what other damage can occur to the engine it over heats pass the half way mark but not to the red, 95 dodge ram 1500.
over heating of an engine causes early death. save the money fix the problem while its cheap and simple
going through the same problem right now with my 2500. definitely get that taken care of asap, especially if adding coolant to the radiator isn't working anymore. there's a good chrysler waterpump video on youtube if you search your year and model.
So u don't need a tool to hold the nuts and keep it from spining? Will thins work with a 20 year old never replace water pump rusted and what the min size psi and air tank for this tool
I was wondering about the spinning too
Thank you
I believe that the 5.4 not a 5.7
Thank God mine just came off easy with a wrench
Thx!
I dont know man. I guess im poor. Huge cresent wrench and a 3lb hammer. Make sure your going the correct direction. Keep tapping, the shock will break it loose. For me, everytime.
No, I don't remove the belt till its off. I can imagine if you dont know what your doin you could really f things up doing this but maybe ive just been lucky
Yeah, I mean, that may be a great investment when you have a business, expense account, and when time is money. But for us at home, a wrench and hammer will certainly do. I plan to borrow the tool from the car store though...or maybe I will just buy the crescent wrench🤔
Cool!
Hammer and wrench works good for me.
My Brother U are The Best 👍😎
Thanks for the visit please subscribe
Thank you for the video.
You're welcome Thanks for the visit please subscribe
Don't buy it off the matco tool truck for more $$$. It a rebranded Lisle 43300.
What if your fan wobbles back and forth like it's loose what is the problem
Bearing inside the clutch is bad.
where did you get that tool from?
matco tools, and i think i seen one on ebay
You can use a pipe wrench as well with a cheater bar.
Thanks for the visit please subscribe
Could you, or anyone, tell me how to get just the fan shroud off only. I having a hell of a time trying to, and I see you did it.😳
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level.
remove it with the fan
Yea the threaded part broke off in my clutch fan when I took mine off
Yeah that why the sell the pump with the clutch installed
Is the air tool an air chisel or an impact wrench.
air hammer
Mate I'm from Australia and would love to know if I can get that tool ??
try e bay, Thanks for the visit please subscribe
5.4
Can a Non-Air Cordless Impact Wrench be used with this tool?
Thanks for the visit please subscribe
Sweet 👍
I have a 95 ford e150 I can't find a wrench to fit in there it's a 1 5/8ths any ideas how to get it off? Can i just take the entire water pump off without removing fan?
Is the 1 5/8 wrench too tight or loose on the bolt, might be a metric
Its not an air gun its an air hammer. As an A1 tech I hate when tools aren't called the correct names.
Nice video! By the way, the spider in the fan fin should be very dizzy...
You're right!
Would it work on a Dodge ram 1500
Love that accent!
Nice.
Is that an air hammer/chisel or an impact wrench?
hammer
Pneumatic hammer
Nice
Dude u just blow my mind! we end using torch and air hammer took us 2 nighters 😂😂😂 thank u!!!🤙🏼
Me too
..had to heat with mapp forever then wd40
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on RUclips for more material on a different level.
Nope just rounded the nut 😂
Can't get it to break loose
The Maddox fan clutch kit from harbor freight does not include the right size for 4.9l Ford,,,,just so you know,,,
Great tool. I need one
check out matco tools or try e bay
I think Lisle makes the tool or a kit with more sizes.
Lisle 43300
Excellent.
Thanks for the visit please subscribe
Hmmm...$220 for a matco removal tool, or $70 for a brand new fan assembly 🤔....I can see if you use them everyday, but not for somebody watching RUclips videos to fix their stuff
You still have to take it off.
I am trying to replace a fan clutch on a Ranger and I don't think there is another way to do this. I agree its a lot of money in tools but that's how one ends up with so many tools.
Why does my clutch fan still sounds like a airplane taking off even after replacing it. ???
Ralph Lugo It’s probably a heavy duty fan clutch
possibly a bad part.
5.4L ....
Leave the belt on use a cresent wrench and a dead blow hammer wack that bia 😂 been doing it for years before these MacGyver tools kits came out
Straight up🤣🤣🤣🤣
did that when i was younger, now i have money to do the hard work for me. Thanks for the visit please subscribe
So as it appears im a dumbass 20 year old do you know any methods with the pump and fan already off the vehicle
If I can fix it for fitty bucks was a person 😆
Bro just let it drop
Never seen a 5.7L navigator lmao
maybe the owner put a stroker kit in it.
5.4l V8 330ci
You mean 5.4 l right