DIY 10 Bottle Filling Machine using Arduino - 600 Bottles/Hour

$2/5pcs 4Layer & 2Layer PCBs: jlcpcb.com
Good News!
Now you can order me to design a custom PCB for you!
goo.gl/rUxA5C
List of Materials:
(Affiliate Links}
Water Pump:
www.banggood.com/custlink/3KK...
100ml Water Bottles:
www.banggood.com/custlink/DD3...
Large Pulley:
www.banggood.com/custlink/Dvv...
Small Pulley:
www.banggood.com/custlink/3mG...
Gear Remover:
www.banggood.com/custlink/KGK...
8mm Shaft:
www.banggood.com/custlink/KvK...
www.banggood.com/custlink/GmG...
8mm Pulley:
www.banggood.com/custlink/v3K...
Belt:
www.banggood.com/custlink/Gmv...
Stepper Motor:
www.banggood.com/custlink/3vD...
Zip Ties:
www.banggood.com/custlink/K3v...
Stepper Motor Driver:
www.banggood.com/custlink/3K3...
20x4 LCD:
www.banggood.com/custlink/m3m...
Transister bc547:
www.banggood.com/custlink/KK3...
5V Buzzer:
www.banggood.com/custlink/vvv...
LM7812CV:
www.banggood.com/custlink/m3m...
LM7805CV:
www.banggood.com/custlink/DvG...
DC Jack:
www.banggood.com/custlink/mmK...
DC Pin:
www.banggood.com/custlink/DKm...
Terminal Blocks:
www.banggood.com/custlink/3KG...
Tactile Button:
www.banggood.com/custlink/Gv3...
Male Female Header Pins:
www.banggood.com/custlink/3Dv...
Jumper Wires:
www.banggood.com/custlink/3DG...
Heat Sink:
www.banggood.com/custlink/D3D...
Spacers:
www.banggood.com/custlink/3GK...
PCB Gerbers & Code:
Information will be available soon.
3D Printer & Filaments:
Get ENDER 3-PRO Printer at 30% Off here: www.banggood.com/custlink/KDK...
23% off on Filament here: www.banggood.com/custlink/KGm...
BGender04 US$195
IMPORTANT:
Ask your customs department for restrictions and taxes on 3D Printer before ordering it.
Get Masks and stay safe!
www.banggood.com/Wholesale-su...
Note: Do not use this project for selling or re-uploading on any social site. only for personal use.
Also buy materials from given affiliate links. it will give me a little commission. Thanks
TOOLS:
Tripod: www.banggood.com/custlink/DmK...
Soldering Iron: goo.gl/cuAJQq
Soldering Paste： goo.gl/16xrgn
Third Hand Tool: goo.gl/5vCAiu
Multimeter :goo.gl/WxwQ2J
Battery % meter: www.banggood.com/custlink/GDv...
www.banggood.com/custlink/3K3...
Green Mat: www.banggood.com/custlink/KKm...
Like Us On Facebook:
goo.gl/rUxA5C
SUBSCRIBE HERE:
goo.gl/2Epk4x

[@Drxxx]

Amazing project!!

[@ShafiqulIslam-fp5dx]

Wow, I love the way you spreading your talents and knowledge in the world. You're great bro.

[@memeskiduniya1426]

Truly ausome bro!!!👍👍👍👍

[@ElectroCoderEC]

Awesome. I like it so much!

[@BigBoyTechToys]

lovery... greater job,greater skills

[@thewelltalent5995]

Amazing project

[@hmtech4807]

Fantastic job bro you are magnificent

[@bencotech9141]

you can also add a solenoid valve so that the liquid does not flow back when the pump stops

[@tanettanettech2925]

Wow great am anxiously waiting for the schematic and the code

[@jnanendrakumar7652]

Sir in corona time also you're collecting items and doing project is very great sir👍👍👍

[@digitalteknologimarkindopt1464]

Thank you sir, youre genius👍

[@ShafaqIftikhar-pw9ld]

Top work!!!!!

[@gregorzajec]

Excelent project as usual, congrat.

[@santiagojacoby9885]

I guess im asking randomly but does anyone know of a trick to log back into an Instagram account?
I somehow lost the account password. I appreciate any tips you can give me

[@gunnerlogan4664]

@Santiago Jacoby instablaster ;)

[@santiagojacoby9885]

@Gunner Logan I really appreciate your reply. I got to the site through google and Im trying it out now.
I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

[@carlosbruni7955]

Excelente Trabalho com Arduino, parabéns!
Congratulations it an excelent Work with arduino.

[@sumansirra3054]

Great innovation

[@Tamilselvan-fd3jg]

Excellent 👍👍👍

[@electronic7979]

Very good

[@MuhammadDaudkhanTV100]

Woo superbly

[@tmpEngine]

damn bro, you really like filling bottles !! this is the 5th video im watching of you filling bottles

[@EasyHomeMadeProjects]

Yeah... you are watching my fifth video about bottle filling, it means you found it interesting. That's why i made

[@BasitKhan-pi4vt]

Can I buy a filling machine from you?

[@BasitKhan-pi4vt]

Please, I need a filling machine

[@harshmalhotraclasses5618]

I also need same machine could you please send me your offer price

[@prism340]

Can l buy a filling machine sir

[@sabyann]

hello
can put the link of the LCD screen mounting brackets please and the stl files if you can.
Thanks you

[@SatisPrabu]

Hi,
how could I get this project's all kit from your sit....

[@omeroglu9684]

good job

[@ArletaAdamska]

Do you can make project with automatic arm?

[@amiltoncoelho478]

Good evening, I'm in Brazil and I found the project very interesting, congratulations
Would it be possible to buy the PCB files and the Arduino program

[@Royalstar-Rk2023]

Amazing

[@MrNams]

How it measure 100ml?

[@lucasfernandez3653]

Awesome work, is there any way to buy the project? To make with my students?

[@yinyang191]

i want to buy this for my home use what the price for this machine

[@mail2mahii]

Plze give an idea to fill billow 10 ml (to fill like inks) and small moving bottle like pen barrels

[@danzreview]

Awesome, where i can see the guide to make it

[@honeyy79]

Hi. Could you make a brush egg washer?

[@currentstatus6173]

please you suggest me this machine all components what this price

[@businessdepth6109]

suprb video bro

[@imrannakshbandi3604]

Oil filling machine banke de sakte ho sir 25ml and 100ml

[@JohnHeath777]

please give a link to the IR sensor?

[@needmoneyfaster5986]

This is a great project! Is it possible for you to please do a project that incorporates a peristaltic pump that can pump glycerine?? The same rotational bottle concept included!

[@EasyHomeMadeProjects]

It is simple. Just replace the pump.

[@miquizmic847]

Hi

[@hafizminhasshafi111]

Mashaallah

[@ajamesart6657]

Nice innovation, pls where is the code, can't find it in the description.

[@user-cx2is3ci4e]

please how can i have your Arduino program code and the step for realization of PCB please

[@StrsAmbrg]

Do you have method to add sensor to detect if the bottle is completely filled up, or not the bottle filled up not excessively, say due to the pump got problem (i.e: current supplied to the pump get higher or lower that make the pump rotate faster or slower), so the bottled filled up exactly as expected. Here, there will be two parameters to stop the pump: timer and sensor. Timer probably will be less important.

[@bencotech9141]

flow meter

[@priyakantsoni2362]

Great
How much cost for this machine

[@movietrailer1983]

Good 👍👍

[@bratpfanne8232]

Great work! How does it know when the bottle is full? I assume the IR is just for bottle detection. Is it just activating the pump for X time or is there something else?

[@EasyHomeMadeProjects]

It is time dependent.

[@mibrahim4245]

@@EasyHomeMadeProjects so if you add a flow sensor and use it to calculate the volume, it would be a great extra feature..

[@diyhacker5923]

Powder fillings???

[@kamrulislam1651]

Nice

[@amanmhs]

Is it possible to make my own weight machine from 100gm to 1kg

[@edherrera9514]

Where can I buy it ?

[@blossomsnelly2620]

Please how can I get it

[@advocatetabrezkhanlegalfor3314]

I need this machine/setup can u help me out

[@shajilhyders]

hai i am rady to buy the code and the pcb how much is the price

[@sukamalsaha357]

How much cost of the project

[@narinderkataria4496]

How can I made this item

[@gaurangsharad6049]

Brother, add a cap fixer as well...

[@mohammadhashim5807]

Can you supply this same thing sir

[@shamarulraj7549]

I need this machine for 750ml.. Bro how to buy..

[@jumen3238]

How can I contact you for business purposes

[@uptownfragrance6148]

this is a great video can anyone help make this to do oil form , please help

[@devilridham4921]

Is it for sale?

[@priyakantsoni2362]

Bro where are you from

[@bikrammandal7856]

I want to buy this

[@avenger6783]

Excelente amigo..me podrías mandar el código los archivos stl y el eskema... gracias..... saludos desde Tabasco México

[@jakandy1]

How much this will be cost?

[@SumiitSagar]

Hey Can I get the project details

[@saadshah7107]

can i purchase this from u??

[@keyrun3663]

I want to purchase this machine can you give me details

[@user-se8st1og4c]

bhai ap kahan sa hain

[@shubhampareta07]

please make a video on dual axis solar tracker

[@nikolaosdamianidis5604]

Next project chicken door opener by simple MG996R Gear Servo Motor jast up and down motion
Good work continue like that

[@user-se8st1og4c]

kis country sa hain ap or kis city sa

[@gopigoud2821]

I want same but larger capacity of filling

[@IrtyGo560]

I will make a plastic housing for machine body and I will also use a 7 inch Pixel Lcd from AliExpress for more features like wallpaper background
Errors.
E17:Water Pump wires are not connected.
E20: Limit switch damaged
E24:Infared Sensor Fail
E23:Bottle Not Detected
E10:Stepper Motor not connected or damaged
E5:Bottle already filled or machine started multiple times with same bottle.
E30: Memory full(1TB\1TB)
E31:Low battery
What to do is shown on a sticker on back.

[@CoCoMili2467.N]

Hello sir I am interested this but I want to some changing this machine sir can you send me price this machine thanks

[@daniyaldaniyal1599]

Total kitnay ka paray ga

[@AmbadiBM]

Bro please do a video on screw counting machine

[@kanadjadhav9514]

Where can i get codes

[@tonysicily2687]

Look in the description for the link

[@biliatphiri1010]

Are there any sensors connected to the machine to detect the empty slot. How does it do it?

[@EasyHomeMadeProjects]

Yes, watch complete video

[@prasantagorai8504]

500ml filling ka setup kitna parega

[@amalbabu7667]

Please provide the code 🙏🙏

[@kennethmau624]

Hi can I buy your DIY sample? Tq

[@chandancommunication2515]

Y setap mujhe v chahia kitna Dena hoga

[@uptownfragrance6148]

I really really need this machine in 1oz bottles already built and sent to me please

[@zaikrkhan3410]

How I get all metrial to India.

[@biotechindustry6911]

Good job as always and I am waiting for the PCB jerber and the arduino code.

[@t4ndu]

Do you get it onetime?

[@biotechindustry6911]

@@t4ndu not yet!!!

[@alokbeats3769]

What is the total cost??

[@tinarichards7972]

3D File for bottle holders ???

[@samnotrachetan]

Can I have greber file for your PCB

[@syedmoizuddin3877]

Sir how much is the total cost of this project.

[@adnancipet]

Please share me price all spare

[@syaifulanam6726]

Link oldshop spare part

[@GyanBaaz.Shishir]

Hi
Have some need of this type of machine can you give any contact detail to talk

[@indrajeetsingh1569]

Hi muje ek ye mashine cahiye mil jayegi

[@diliphalder668]

I want this machine. how much price

[@mohamadhawamdeh7901]

How can I communicate with you

[@samknowsitall]

Cost for this machine

[@MuhammadMuhammad-rk9xe]

Hello sir. Cost ?

[@thevabhas7225]

Good.
But uno program not found...

[@MuhammadMuhammad-rk9xe]

How much

[@syedyaqoob9864]

Show us how to fill one litre bottle..
With (5) filing paiep

[@amolmorepatil4745]

R u from India

[@fazalrabifazalrabi7469]

Sar I need to ac gel filler pump where are available in pakistan.

[@easypackpk0786]

Yes contract me .