Marine Fuel Oil Purifier: Working Principle of Centrifugal Separator
HTML-код
- Опубликовано: 25 авг 2024
- Video No. 1 of "Marine Centrifugal Separator Video Series"
#Purifier #Centrifuge #Fuelseparator
⚓️SUBSCRIBE TO OUR CHANNEL TO GET THE COMPLETE INFORMATION ON PURIFIER⚓️
*NEXT VIDEO - CONSTRUCTION OF MARINE OIL PURIFIER - • Fuel Oil Purifier Cons... *
A high-speed centrifuge is a type of separator which is used on a ship to remove contamination from liquids such as fuel and lube oils. It is imperative to carry out this treatment in order to remove solid impurities and water before they are supplied to the marine engine. Thus, the task of the centrifuge is to remove solid contamination from liquid and to remove undesirable liquid (water) from useful liquids (fuel).
Principle of Working:
The separation principle of high-speed centrifuge depends on the difference in the specific gravity of two different liquids. To understand, let’s take a settling tank where fuel is stored and because of the difference in the gravity of water and fuel (water is heavier) the water gets collected at the bottom part of the due to the effect of gravity.
Mathematically this process can be represented by:
Fs = ∏/6x D3 (ρw-ρo) g
Where Fs is the separating force, ρw is the density of water, ρo is the density of oil and “g” is gravitational force.
Now if we convert the tank into a conical rotating object, then the gravitational factor g will be replaced by the centrifugal force ω2 r, where ω2 is angular velocity of rotation and r is the effective radius.
Fs = ∏/6x D3 (ρw-ρo) ω2 r.
Now the separating force will be much higher in the centrifuge as compare to a settling tank.
There are normally two types based on the application:
1) Purifier: When a centrifuge is arranged for separating two liquids of different densities, for e.g. water from oil, it is known as a purifier. The main component of purifier is correct size gravity disc or dam ring which is responsible for creating an interface between the oil and water.
2) Clarifier: When a centrifugal is arranged to remove only impurities and a small amount of water, it is called as the clarifier. Since it is used mainly for that fluid were mostly solid impurities are to be removed, gravity disc is not used in clarifier; instead, a sealing ring is used to keep the impurities intact unless desludged.
Best simulation with basic science concept I've ever seen. Thank for clarify what the actual work inside it:). Always tune as to all confuser !
Thank you Ubaid for the comment. Glad you liked it. Please do share and support 👍🏻
i dont mean to be so offtopic but does anyone know a method to get back into an Instagram account??
I was dumb forgot the account password. I would love any tips you can give me.
@Declan David instablaster ;)
@Carl Damien i really appreciate your reply. I got to the site through google and Im trying it out now.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Carl Damien It worked and I finally got access to my account again. I am so happy!
Thank you so much, you saved my account!
Done watching sir BSMT-S1L
Better 👍 Really Liked the working animated demos of minute machinery.
Thank you Ashish
Thank you for uploading this! 👍
Please stay tuned and subscribe to our channel. We will be sharing Construction and Operation videos of Purifier in coming weeks.
Thank you, guys!
You help to understand better some important things.
Wish you all the best!
Thank you for your comment. We are glad that the content is useful. Please do share and support 👍🏻
Nice information ❤
Useful stuff and good animations.
Glad you liked it Pranjal. Please do share and support 👍
Done watching sir
Thank you for the ideas😊
thanks for this!!
Our pleasure!
Naice and good animations video oil purifier
Done watching sir, sorry for being late sir
Done watching sir S1L
Very interesting
done watching sir S1BIR
Good
Thank you Rajesh. Please do share and support 👍🏻
Thank you
👍🏻 We are glad you liked the content.
Please do share and support.
Done watching sir S1BIR
Thanks for the knowledge...
Glad you liked it
That sliding bowl is thick and hard. And secured with nut with 200 Nm torque on bigger separator. I wonder how it slide up to seal the bowl even if it is secured tightly 🤔🤔 centrifugal force?
Yes and it floats in water
insightful
done watching from S1BIR
What is the best type of feed pump to use for Alfa Laval Centrifuge in Rendering industry for Bio-fuel. we are having problems with the high salt content wearing our Roppa Pumps out after 2 weeks. Can you offer any solutions?
the fuel from bunker is transfered to storage tank and after to settling tank*
Of how much viscosity fuel oil is transferred to purifier??
What's the purpose of sealing water ??
MICO REYES CAIPANG
S1E BSMT
Nice vedio.thanks a lot.keep doing it
Thank you too. Please do share and support👍🏻
👌👍
Thank you. Stay tuned...We will publish Construction and Operation videos in coming week.
can i ask a question what are purifiers used for and on what principle do they work?
This wat aap nampr
00201228435703
I have 4 machines Alva laval sepretor oil centrifuge
Jay El Gloria
S1E BSMT
I like how the narrator is desperately attempting to convey that this video is bootleg as fuck.
Sir why water adding and separate in purifier??
Sir why heater needed before centrifuge works??
For better seperation
Makes oil thin + more fluid.
JEZRAEL A. HINGONE
Hi
Why No Water Seal Alarm Comes?
Thnk u....
👍 Glad the content is useful.
May be 20-40mt/day not 200-400mt/day?
More like 150-250 tons/day for 7.000-10.000 TEU container ship, with around 10.000 m^3 of fuel onboard, depending on the required range. For example the MSC Altamira with 8.886 TEU, consuming 160 tons/day and bunkers of 9.000 m^3 of HFO (heavy fuel oil)
@@timohacquebord9135 Oh. I see. Thanx.
Exchange rate today continue
Familia
👍
this machine can have separate water, oil lubricate and fuel diesel
Done watching sir
Done watching sir S1L
Done watching sir S1L