How to Fix If Main Brush Jammed. Permanent Solution.
HTML-код
- Опубликовано: 28 фев 2021
- DN79T, Deebot 600 & all Similar models If Giving 2 Beep Error Means Main Brush Jammed So How to Fix This Error Permanently...
#Ecovacs #Deebot #DeebotDN79T #Deebot600 #ozmo600 #ozmo610 #DD4G #Dm81 #T8AIVI #T8plus #ozmo #T8 #T8AIVI #DM88 #CEN540 #CEN #BrushJammed #How
From Mauritius. I have been struggling with my deebot for weeks. Every 15minutes it was signaling mainbrush malfunction. I was almost about to throw it and buy a new one. But you solved my problem. Thank you. You saved me some money
Welcome
Thank you so much for solving my brush problem. It had a frozen bering. I'm a 71 yr old that loves her Deebot. It makes me so sad when it keeps beeping and stopping. Your demonstration helped me to fix it easily. Thank you!
Our ecovac pet hair was collecting in the brush and not going to the bin. We were stressed bcos it was just 3 months old. Thankfully we saw your video and thought of giving it a try and worked. We are so grateful for this video
Thank you from Chicago! I've been dealing with this "main brush error" for about a month, and it's been driving me bonkers. After watching your video, it took me less than 5 minutes to dig out an unbelievable amount of hair out of the bearing pin assembly. "DJ Roomba" is back to sucking better than ever!
Waoooo rocking 🤟🤟🌟🌟🌟
Thank you so so so much! Today was the last day of my apartment least and my vacuum was giving me this error. Absolute panic. This was such an easy fix and saved my security deposit and sanity.
Welcome 🙏
You just made my day! I cleaned my main brush and it looked perfect and still was saying tangled and I was so confused. So I decided to google it and try and work out what was going on. This is EXACTLY what was going on. Thank you so much!!!!
This was days of confusion until I discovered this video. Thanks!
Thanks..I really feel happy when read people comments all around the world 🌍...thank you so much
Thanks so much. It was the bearing side that got me because I wasn't sure I could take that side off but after seeing you do it I was able to fix my vacuum. Watched a few ads for you.
Welcome n thanks for watching 😊
Simply fantastic! The information here enabled me to fix repetitive 'main brush jammed' errors on my Ecovacs Deebot T9+. The brush construction was a little different, but the principle was the same. Thank you so much for making this video!
Welcome & thanks for such a nice comment thanks
From Australia my deebot u2 had the exact same problem and you, my friend and saved me heaps of money.
Welcome
Oh my god I had tried EVERYTHING and this finally fixed our vacuum. Thank you!
Welcome 😄
Thanks for this video. Altough it wasnt exactly the same brand nor the same solution. I cleaned the brush and the bearing and still nothing, so i checked the other side of the brush, where it has a plastic square shapped form that goes into a rotor in the motor of the robot vacuum. Activating the vacuum without the brush upside down made me realice it made some noise meaning effort to move the thing that moves the main brush, so i thought it would be a lot of work to disassemble all the robot body just to clean that part. Luckily before giving up i tried with a needle and other pointy stuff to remove the dirt around that "gear". It didnt worked either, so i forced to move it and showed some more clog. i cleaned it again, forced it to move manually, and clean, forced again and clean, and there, the vacuum is working again.
Thing is, small dirt will always eventually get inside that part and sooner or later i think everyone is gonna have this problem, altough i feel confident that this that i said is the solution for everytime it happens. Again, i wouldnt have figured it out without your video, so thanks again.
BTW: manual said "error 46: main brush clog: take the vacuum to service".... yeah dude, right... manuals should just tell the people how to fix this kind of stuff!!!
This was EXACTLY my problem. Thank you for sharing how to fix this!
Welcome
BROTHER, THANK YOU, you have helped so much!
Thank you - less than 90seconds into the vid to work out how to sort it and then less than a minute to get back to cleaning.
Thanks for such a nice comment....it happen when we do our work with depth of our 💖...
thanks bro you are the only one that had this instruction video for the U2
Welcome...if you have any questions u can ask in comments
Thanks very much. You helped me to fix my vacuum, it was driving me nuts!
Welcome
Sir,
thank you so much for your tutorial. I was able to do exactly what you did in this video and my deebot is working like new!!! You’re amazing in explaining and your camera person is also very good.
Thanks 🙏
Omg this video safes me from buying a new brush🙌🏼
Welcome 😊😊
Thank you so much! I couldn't figure out why or how to get it out. Lots and lots of hair. All fixed! 😁
Thank god i found this if it wasn't for this video the robot would have gone to a repair shop
Thank you so much..My eco vac had the same issue.
Welcome 🤗❤️
Thank you do much! It helped me to fix my Yeedi!
Thanks a lot, I have just fixed my robot with your instructions
Welcome
Thanks! This fixed the problem for my vaccum!
Welcome
Thank you. Fixed my problem. Wonderful..
Welcome
It worked really well and thank you 🙏
what if main brush motor is not working
Thank you so much for this
Worked! Thank you
Welcome
Thank you so so SO much!!!!
Welcome
Thank you 🎉 I hope this is what my issue is
Welcome
Thank You very much❤
Thank you so much for the video
Welcome
Used your video to fix my Yeedi K650. Same procedure, but the pin is contained on one side so you need a tiny punch to knock it free.
very useful thanks 🌸
Thankyou!
Fixed it for me!
Didn't know you could pull the pin out of the roller head
After cleaning all the hair it's working again
If problem is due to brush jammed then with this method no need to replace brush... Just service at home n fix it.. But in some cases main brush motor jammed... That also if it's only gear jammed so u can service at home but if motor jammed then need to replace main brush motor
Can you have a close up video of how to re assemble the main brush , it was easy to assemble together at first but then I put it on the wrong way. I need a hammer now
Hi, could you suggest how to clean the same hair stuck in the silicon brush - for Deebot U2 PRO . I have 2 main brushes. One like the video and the other one like a silicone brush. I want to know how to clean it.
Ok noted...I'll shoot video on this topic by next week
Very useful information. The main motor has a small sqare plastic part ( left side) in which the roller bearing goes. How to remove that part? Is it necessary to remove it for cleaning? Also how to fix it back?
I lost mine, now won’t roll… no replacements online
@@SexyTexas I know, so i contacted service centre and they provided me that tiny square part. I had to pay for it of course.
thank you ❤
Welcome
The mop pads will not spin on my ecovac t10 omni. they just quit working. ive reset the omni but still they wont spin. removed mopping pad plate and cleaned them but still wont spin. on occasion for a few seconds the mopping pads will spin and then stop and will not start spinning again.
Is there a belt for the mop motor that may be worn? to explain why they only will spin for a few seconds when your not expecting it and then stop. what is the address for a return depot for a return under warranty from canada. i know i need an rma first but only want to estimate my return shipping cost.
And if pet hair brush is jammed? Pls advice how to open and clean
Bro u saved my house
I have a 710 deebot, says brush is jammed even with the brush removed. I have removed all the screws and unable to take the cover off, do you have any suggestions? I live in northern Canada and its over $100.00 to ship
I have been doing this and it has worked wonderfully but looks like the other side of the brush which actually rotates the brush is getting jammed. How to resolved that?
Can you do a video on replacing the main brush motor? Mine died after 14 months. Also the vacuum fan only works on one side.
I'll try to shoot a video on this topic sir
my main brush rotates slowly for 2 seconds and stops. I checked by removing main brush and touching the attachment point in the robot while starting it
Hello 👋 thanks for video . Friend please advise me how to clean 🧽 the anti drop sensor from INSIDE on DEEBOT OZMO T8+ ( it got some dirt ( orange dirt looks like iron acidity ) )? The sensor is back one
I have already unscrew all but still can’t get there
Thanks for your time
From inside u can not do at home... I don't recommend... But u can try air pressure gun to clean the dust hopefully will be fix with pressure gun
The problem I'm having is that my old main brush works fine but any new main brush I put it, the machine says main brush tangled. If I put the old brush back in, it works fine. What is causing this problem? It's a brand new EcoVacs brand main brush right out of the box. Nothing tangled on the brush itself! It spins freely when I twirl it in the machine.
Plz send me a pic of both brushes..old n new ... WhatsApp at +601137973018
I could remove the brush end cap if the main brush wasn’t stuck in the machine. I’ve removed the main brush before for cleaning, but now it is stuck and won’t come out. PLEASE HELP
What do I do if i still get the error after cleaning the brush bearing? I even get the "Main brush jammed" error when the brush is not installed? Do i need to open the bot and try and see if hair is stuck in the motor mechanism?
If u removed main brush already n still deebot giving same brush error..means main brush motor is jammed...u can check manually first..put back main brush n try to turn Main brush with ur fingers...see eaisly can turn or feels hard...if hard or totally can not move means motor jammed ...plz open top cover remove bumper then take out main brush motor assembly... disassemble the motor assembly n try to clean using teeth brush n WD-40 spry n assemble back... hopefully will work.because in this model motor wont burn Very fast but belting n gear can stuck...so after service hopefully will work
I cleaned the brush end just like you showed and there was lots of twisted-up hair. The Ecovac D79 still beeped 4 times. I changed the brush motor and battery and the Ecovac still does not work. I purchased a new roller and still no luck. Any ideas?
Ohhh dear.. you already spent a lot buying all these items...plz WhatsApp me a video clip at 00601137973018.
Let me see the video then I'll explain to you TQ
How do you clean the main brush motor ?
Actually if motor we clean it start working but after few days Will be same again because motor jammed already...but I'd some dust stick with belt or roller only jammed then ok just clean it will start working as normal
Hi dear I have a problem with my t8 aivi ... I got message to clean Anti drop sensor, and I cleaned properly but still not working and there is something inside one of this sensor like humidity ... There's a way to open the sensor to cleane ?
Hi bro, I recently bought Ecovacs Deebot U2 pro from Amazon.in... However, one of the side brushes got stuck today with hair.. I am not able to untangle the hair... I am tried to cut the hair and remove but hair didn't got remove in full.. can u please tell me or share a video how I can remove the side brushes, clean them and fix again?
Plz search for ecovacs Technical Support at RUclips n watch U2PRO video full tutorial in that video i mentioned how to remove n refix side brushes...hopefully will be useful for you
@@ecovacstechnicalsupport5278 can u Please give the RUclips link for this tutorial to clean the brushes.
The rubber on the main brush cover gets folded everytime my deebot 500 starts cleaning. This pushes the dirt past the robovac. Any solution for this? Any replacement part for the main brush cover?
Brush cover available.. Plz chek online in ur country... Or contact service center they can arrange. In india there is one in new dehli
@@ecovacstechnicalsupport5278 yes, didn’t see the sku listed in India online hence had to comment on your video! 🙌🏻 thanks
Hi, hope your issue is solved. If not, You can reach surefix banglore service. Hope this will help you.
I bought a new main brush….still not working…
Hi, let's see it someone can help me.
I need to disassemble the T8 empty base station due to I have purchased recently and it is impossible for me to take back to my country in the airline as a box. So in order to insert the base station into the luggage I would need to disassemble the tower from the base, unscrewing about 4 screws. Do you know if by doing that, I can break any cable or electronic mainboard that then makes the station useless when I put it back together?
Hi... First of all I pray for you... Reach ur destination safely. Just there are 3 screw where tower joint just unscrew n pull up tower casing... There's no worries don't worry... Just connected with pins that will automatically disconnect when u pull up tower... Then eaisly can pack in small box n travel
@@ecovacstechnicalsupport5278 THANK YOU !!!!! Thank you so much for your wish! I still have a couple of weeks here and then yes, back to Argentina. Regarding the disassemble the tower (place for the bag) from the base (robot goes to charging), I see the three screws that you said. Those 3 are bigger than others close to them. I will proceed what you advised to me as soon as I get an unscrewdriver here at the hotel. But actually I will do it in confident :), according to your comments. I was worried to make a disaster and break something trying to unscrew it by myself without knowing what I was really doing. I will let know how this going on !!! Again thank you for your instructions!
Can u make same video, but in better quality? I unscrewed brush, now cant put it back, cuz of poor video quality cant see how u put it back properly :D
Sure I'll try
Hi. I have ozmo 920. Im unable to remove the main brush at all. Can you please show how its done.
Means hair tangyn melted already that's why brush stuck...u can use screw driver n a customer to remove..but main brush confrm need to replace
The main brush is spinning even when is off..pls help
Can u PLEASE fix mine? I think the main brush motor is broke :(
Plz WhatsApp at 00601137973018