Deebot | Ozmo T9 | How to Fix/Repair Suction Issues | Why Dust Stick With Main Brush ??
HTML-код
- Опубликовано: 19 ноя 2022
- Deebot | Ozmo T9 | How to Fix/Repair Suction Issues | Why Dust Stick With Main Brush ??
Why there's Grinding Sounds From Main brush??
Why Deebot Doesn't pickup the Dust??
Why suction power is not Strong enough?
How to check the Dust box Filter??
How to Clean Dust Filter?
Why Filter can't wash??
Get All these answers in this video.
#Ecovacs #Robots #Deebot #vacuum #Robot #Ozmo #DR98 #DR95 #DA60 #Slim #slim11 #DM88 #CEN540 #Cen533 #cen #ozmo920 #Ozmo950 #T8 #aivi #plus #T8 #DA3g #DA5g #poppyio #moping #LDS #Sensor #LDS #Dtof #3Dcamera #Laser #technology #ozmo #t9 #ozmot9 #omni #omnix1 #omni #turbo #auto #empty #station #T10 #T10omni
#technology #tech #valorant #success #manojdey #edit
Created by InShot:inshotapp.page.link/YTShare
Cleaning the airfilter solved thesuction issue.. thank you so much
Good 😊
Good informative video.
Very good la ! Love ur channel, so so helpful...👍
Welcome
Do you have a video on how to replace the main brush motor? I took apart my T8, but could not figure out how to access the main brush motor in order to replace it.
I have the same situation. Did you ever find out how to replace the main motor?
@@chilli0007 Not yet. I was hoping @Ecovacs Technical Support would make a how to video, but so far I have not seen one. I've been looking at other brands, but I'm still holding out hope I'll be able to repair the motor on my Ecovacs.
My problem is that there no suction power. The mainbrush is working(i guess), is going around when i pick it up. But it doesnt pick anything up, only at the main brush.
Thanks for the video! Do you already have a video for replacing the vacuum fan? If not, can you please make one? Thanks!
Actually there are 2 videos available about disassembly n assemble back ....if you watched those two...then eaisly you can replace vacuum fan
Hey! Really great video.
Do you have one to help diagnose a main suction fan issue. We have a T8 AIVI and when you switch it on the brush motor turns. The filter looks good.
There is no suction and when you hold tissue on the side there is no air flow.
Means vacuum fan need to replace... you can feel the sound also is different..more quite because vacuum fan not functioning...or plz check from the app settings is it mistakenly selected quite mode??
Ok, thanks, will order a part
@@ecovacstechnicalsupport5278 I also have a T8 AIVI where the vacuum fan motor does not run. I just replaced the main brush motor and it cleaned several rooms just fine, but after I picked it up to clear a tangle, the fan motor quit and I can't get it to start again. How can I be sure it's the motor that's failed and not a software or controller issue? It takes several weeks for the part to arrive, so I want to be sure that will fix it.
@@simonritchie4762 Hi, I have the same issue. The different sound is definitely the biggest change. What part did you order? Did replacing it fix the issue? Thanks in advance.
I checked for hair and even put unit on a glass top to see if the spot where the brush plugs into would move (without the brush) and it didn't even turn :( can you fix mine? I think it's the main brush motor
Quick question What do you believe is wrong with the T9 if the main brush keeps running? The main brush on mine will not stop till the battery is flat?
I want to add too, it is a very good unit that has worked well for a long time with no real major issues!
txs
Motherboard & main brush motor short circuit...need to replace both together
Hello, the main brush of the ecovacs osmo 950 robot turns on the first start and then it does not. While the battery is at 100% in good condition, it drops to 80% after 30 minutes of operation. When I give 12v to the motor, the motor runs. What do you think could be the problem?
Can u plz send me deebot video so I can confirm what's the issue
00601137973018
Hi
I have a deboot 500
Recently it started moving very slowly
I have tested all the ir sensors with the camera and they are good
It also cleans very good
It is detecting all the objects and will not hit them
Only problem is it is moving very slowly and taking more time to clean the room
Plz use any car wax 3-4 drops enough with soft cloth n clean front bumper nicely gently.....deebot front bumper glass might be got scratches or dust that's why it always moves slow
@@ecovacstechnicalsupport5278 thank you for the reply 🙏
Have you ever had to deal with an issue of a noisy vacuum? I removed a Lego piece from ours and now its making a horribly loud noise when suction starts. Hope you have some guidance!
Hi..I just seen your post...plz remove main brush n let the deebot run without main brush...see weather still got those loud sounds or not if after removing sounds settled that means Ur Main brush is faulty need to replace main brush only.,..if after removing brush still got Loud sound then might be vacuum fan broken..need to test weather fan is ok or not...some time vacuum fan motor becomes noisy
@@ecovacstechnicalsupport5278It sounds like an aeroplane about to take off. I think I may have torn a seal or something when I pulled the Lego piece out of it.
Hello, My vacuum make a double double pip with white light, and then shut down,do you know what is going on? Thanks
Hi I need your help
I replaced the sensor in new one
And still the same problem
: d-tof sensor manufacturer
Why?
Hello sir, i've got a low noise fan with zero suction. but it's nothing to do with main brush or filter. If i remove mainbrush or filter the airflow is still KO. I think something stuck in the main fan ...
How can i fix this main fan /motor or replace it ? Is your unmount deebot video enough or there is something else ?
Thanks a lot for your help
Ozmo deebot T8+
Actually vacuum fan is working or totally not functioning... there's no speed slow in vacuum fan assembly...plz check properly...U can take out dust box n press sensor with finger then test
@@ecovacstechnicalsupport5278 exactly what I did. It's making noise but zero suction or airflow. So I guess it's dead then?
How do u clean the filter on the dn78. Mine has no suction and has never really has much. Very disappointed in this item
If filter is already Clean but no suction means vacuum fan assembly not functioning...plz check the vacuum fan assembly
Nice video sir are you supply spare parts
For spare parts sir you need to contact with ur seller or can check Amazon...or online sellers specially from china side....if u r in Malaysia then you can order from lazada or shopee from Ecovacs official store
Do you have any service options in kochi?
Kochi is where??? I can provide my services in Malaysia by next year hopefully in USA & Canada
My main brush is not spinning. I cleaned it thoroughly and even opened the side of the main brush. There was no hair tangled. What should i do?
Main brush motor assembly need to replace
Dear I have omzo 920 bumber stuk msg came kindly send advise who to open bumper and release sensor thanks awaiting yours reply dear
First of all plz confirm weather bumper really stuck or not...press the bumper from Front left n right side see weather can bounce back or not...if can't bounce back means Just bumper came off..in this situation you need to open Only bottom chassis plate n bumper panel screen then just remove bottom chassis plate first then fix back bumper so it can bounce back from all side....then put back all screw...
If bummer can bounce back from all side still giving error then need to replace front anti drop sensors with bumper sensors...its one assembly...all above mentioned sensors attach with one wire if you want to repair those then just replace bumper sensors only no need to replace anti drop sensors
There is one video available on this topic why Deebot reverse or bumper issue...plz check my channel...you can get eaisly... Then you understand what I explained above
How do you tell if the brush motor is not good?
1 brush won't move
2: some time moves but very noisy..means brush motor gears spoil..
Dear l lost my magnetic of water dispenser plate ozmo 905 model
Don't worry...plz can try first any same size magnetic ...put at same place underneath the deebot after power it on. & See weather deebot gives this voice msg that moping plate has been installed.... which magnetic give this msg just attach that peace of magnetic at same place From where it drop...make sure use small peace of magnetic which can fix in that small whole.... hopefully will work
@@ecovacstechnicalsupport5278 thanks dear
My machine to read not working good
Bhai ap agr hindi jante hen ya urdu to ap in languages me bat kr len. Mujhe samjh nai aivap ne likha kia he 😊
Brother, my machine is too real low
Model no?? Plz.. what's the issue
Wow customers are so dumb. Unbelievable. They send thz robots to repair for ridiculous reasons
Actually it's normal.. because sometimes senior citizens they really don't know what's the issue how to solve.. their children bought these vacuum for them so they feel comfortable so whenever vacuum stuck or got any issues they don't know what's the issue that's why they feel easy to bring it to us....but it's ok. It's our duty to serve our valuable customers & help them so they feel comfort.. it's my pleasure to help our customers 😊😊😊
I really like your channel is helpful
I just bought deebot n79s with no charging dock and charger how do I charge it without the docking station.
I will be really happy if you reply me
If i can have your contact
Hi most welcome I can give contact no at Ur request 00601137973018
But for this issue you need to contact with ur seller...only seller can solve this issue... accessories missing or charger missing.. might be possible sometimes