ROBOVAC STUCK BRUSH FIX REPAIR - FOR EUFY AND OTHERS
HTML-код
- Опубликовано: 29 сен 2024
- Please SUBSCRIBE, like, and share if this tutorial helped you. Thank you!
This is a tutorial on how to remove hair and debris from the bearing / bushing that does not freely spin on the main brush. This may need to be performed if normal cleaning does not stop the brush stuck fault from occurring. On the eufy, this would be indicated by a solid red power light and 4 beeps. NOTE: Not mentioned in this video, but the bronze/brass bushing/bearing can be popped out to make cleaning even easier. Sorry I missed that! IF you still have issues after this procedure, see this video for further diagnostics: • Disassemble Eufy Robov...
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
I thought mine was clean till I totally pop out the little gold ball to get to everything under it. So stop at just popping out the pin like the video shows!
I'm going to pin your comment since the mention of popping the bearing out gets missed in the video description. :)
Ugh, it was so gross!!! The brush I had in there didn't even have much, but this was definitely the issue.
I fixed my deebot ! By watching this video! I Would have reordered a new piece if i hadn’t found this video! Thanks a lot!
That is great news! You are welcome!
Thank you so much. I didn’t know that bearing part comes apart.
Eufy works great now.
I normally don’t write reviews but this video helped me massively for my denkee robot. The only bit that I couldn’t figure out from the video (and watched somewhere else) was that you need to hammer out the silver bit. You need to be incredibly careful though because the black clips on the side holding it to the roller may break off.
Thank you for your additional details and precautions.
Fantastic simple instructions that sorted the problem .. many thanks
You are welcome!
Super useful, thank you!
fricken money saver!. nearly chucked it for a new one. thanks heaps!.
Glad to help!
I did this a couple of times but I keep getting the same error. Any other tips?
It's possible debris has found it's way into the inner parts of the vacuum. I think there are other videos that address this. Does it fault right away, or after it has been running for a little bit?
alsautoandappliance mine continues to fault after cleaning the brush bearing. It faults right away.
alsautoandappliance i have one that faults after running about a minute and a half. Any tips? The error beep is indicating sping brush error
@@marko568 Have you tried this procedure and it is still faulting?
alsautoandappliance I’ve tried running the unit with the spinning brush entirely removed and i get the same error. So i am thinking the inner parts of the vacuum might need a similar cleaning
Спасибо, дружище!!! Очень помог!!! Через неделю использования такая ошибка!!! Истерика!
Добро пожаловать! Надеюсь, ваш пылесос снова работает. (Я также надеюсь, что Google правильно перевел это! Lol)
Thanks for this!
I didn't even have to remove the bearing. It was a new brush, and the bearing was stuck straight out of the box. I sprayed some lube in it and twisted it a few times to unstick it, and it was good as new.
Thank you so much! This error was driving us nuts! We had a similar spool of hair in ours, I love the dramatic music at the reveal haha!
Thank you, and glad you got your vac going again! Yes, that sound byte was the first thing that popped in my head when I pulled all of that out of that seemingly small space, so it seemed appropriate to convey that in the video, lol.
I thought I'd tried everything. I actually purchased a new one but I had spare parts for mine and didn't want to lose them so I tried this on a whim.
By everything I mean I actually was convinced the roller brush motor was the issue. i was about to buy a new one but I was worried about buying the wrong one! my brush wasn't even that dirty, but this fixed it! THANK YOU!!!!
You are welcome! Glad to hear you got it going again!
Thanks much!
You are very welcome!
Yup and after you punch pin out you can separate the 2 black plastic pieces and get even more hair out
Thanks. I was 1 step away from throwing my 6 month old vacuum in the trash.
So great to hear yours was spared from the landfill! :)
Thanks for the video!
You are welcome! Hope it helped get you going again. :)
Thanks man I was driving my crazy because my Deebot M80 pro was making noise and suddenly stops to work... I clean all sensors, bumpers and all without results... Seeing your video I was able to remove that part without tools and there are an amazing bunch of hair.... This solve my problem 👍
That's awesome! I like hearing of folks with other brands being able to make use of this video. :)
BUT there is tons of FUZZ in the bristles of my EUFY Robovac 30C. How do I get the fuzz out? It's embedded in the rolling brush fibers. Anyone got any tips?
I use a pet slicker brush and brush the bristles in both directions and that works great for getting out the short hairs that get stuck!
Thanks! This absolutely fixed my problem. I suspected there was gunk up in that bearing but wasn't sure if I could remove that pin without breaking it. Looks like a replacement brush bar is $11(amazon prime) so thats not the end of the world either but this is simple and free.
Glad to hear this helped! Yes, it's also good to know replacement parts are pretty cheap for these units too!
Thank you so much for putting this together. It was the one video that helped me fix my vacuum when it was making a loud clicking noise.
Awesome to hear! You are welcome! :)
You saved our Eufy from the garbage dump!!! I cannot believe how much dog hair was inside that assembly! Thank you!!!
You are very welcome! Glad you are back up and running!
My brush seems to spin fine, but i get the rolling brush stuck error within the first 20 minutes every time. Thoughts?
These vacuums will also fault for "rolling brush" if the side brush motors get stuck or go bad. You can open up the robot and disconnect the side brush motors and see if the error still comes back. Let us know your results. ALSO, the transmission that drives the brush can also have issues (motor, debris, or drive belts/gears). If you search my channel, there are other videos addressing this.
thank you for this! informative and to the point - saved our little Eufy :)
You are welcome! So glad to help. :)
Worked like a charm. Even popped the copper bearing out to give an even more thorough clean. Got out probably 3x the amount of hair here (yay three dogs) but seems to be working now.
So glad it worked for you! I didn't discover the bushing popped out until the second time I had to do this procedure. I should probably note that. Good find!
Thank you. This fixed my eufy. I cleaned both my brushes and it was NASTY but satisfying.
I agree! I sometimes look forward to to doing the job, lol. This is especially so with the head for our regular vacuum cleaner. :)
THANK YOU!!!!
You are quite welcome!
This has been fantastic!! Might you have a solution to why a eufy robovac might have a stuck bumper?
Is the bumper still "springy" or is it literally stuck in or out and has no movement?
just saved me some cashola. free sub for u
That is awesome to hear! That's the main reason why I try and fix my own things. :)
Mate fantastic video, can't believe how much hair came out of mine! Thank you!
You are welcome! Hope all went well!
G-d bless you, man!
God bless you too!
Wow, I just cleaned mine and I can’t believe how much hair was in mine!!!!! Thanks mate!!
Glad to hear you got it going!
Thanks so much worked, now Steve is working perfectly
Awesome! Glad to hear Steve is back to work! :)
Thankyou!! It works (and I haven't been able to use it for over a month until now)
Awesome! So glad to hear it!
Thank you! who knew that much hair could get in there???
You are welcome! Wait till you see the OTHER places hair can get, lol. Slowly, but surely, adding more robo vac repair videos to my channel. ;)
Did this once and it worked great. A year later the bar is now stuck from what appears to be the other side. Is there a similar bearing that holds the neutral side of the brush that can be cleaned by disassembling parts of the unit?
Most likely there is. I have a eufy coming in a few days that I'm going to do a teardown video of that will cover this. I was going to do it using the one we use, but it's working great and I don't want to end a good thing. :) Stay tuned!
@@AlsAutoandAppliance thanks for the reply. Will stay tuned
@@rofflesti If you haven't already seen it, the disassembly video is now up. Unfortunately, the unit I got has a bad board, but you'll at least be able to see if your transmission is contaminated. Good luck! ruclips.net/video/Mo6kLUyUTKg/видео.html
I have been looking for a good eufy video. Well done
Thank you! Hope it helped. :)
Thank you, solved my problem!
You are very welcome!
yup, that was it. thanks!
You're welcome!
@@AlsAutoandAppliance actually not it, that was very clogged but I think the brush motor is burnt out, probably from the axle socket being so junked up. Gonna try to figure out how to get inside that motor to clean it.
@@contaminated666 You're in luck! Please see this video: ruclips.net/video/Mo6kLUyUTKg/видео.html
Thank you
Add my thanks to this. Worked perfectly.
Fantastic to hear this!😎
Didn't work for me. Run free and smoothly. Before and after this. Made no difference, beeping 4 times with constant red light eufy 11c
I found other causes for this fault and they are covered in a new video. Check out my other videos. It will help determine the cause of your faults.
Thank you for your tutorial.
But that didn't solve the problem.
Maybe I'll have to repair the motor and/or the little gearbox, too.
You are welcome. Sorry to hear this didn't help you. We have more robovac repair videos that might be able to help you out. Something we found out is that the side brushes will give the same fault as the roller brush, so you might want to take a look at those too if your main gearbox is fine. Hope you get it going again and please let us know either way!
Thank you!!!
You are welcome! Thank you for visiting!
Thank you! Unfortunately, this worked for 5 minutes. Then after quickly cleaning and starting it again in another room, first it beeped 3 times flashing, we cleaned the sensors. Then it beeps 4 times steady red lightning.. So the same brush issue again. But it is clean and worked for some minutes before.. Really strange. Like the robovac is adressing faults, which are not given..
There might be more debris inside your vac. I just published another video that shows how to take apart the vac and clean the transmission parts. Might want to give it a try. Sorry you're having so many issues. :( ruclips.net/video/Mo6kLUyUTKg/видео.html
@@AlsAutoandAppliance thanks but we already opened the whole robovac (according to a german disassembly video on youtube) and looked for hair/dirt in the brush engine itself. We disassembled it and it was clean, then we assembled everthing again. Since it didnt change anything, I found your video and it was very helpful and as I said, it worked for the first start and some minutes but then, same issue :/ we consider buying an original brush, but i think this won t change anything. Maybe the sensor signals detecting is broken or the engine itself after running some minutes.. Difficult to get the error now, since everything inside the brush engine and the brush itself is clean. Maybe the only solution is buying a new vacuum. At least our robovac was doing his job for more than 1,5 years
@Harry Lawn Mowing We have come to find out the 4 beeps is also caused by the side sweeping brushes or a bad/dirty roller brush transmission. See this video: ruclips.net/video/Ea2-QV60GDU/видео.html
Nailed it, thank you!
You are welcome!
Life saver!
Awesome!
Thank you!!
You're welcome! Glad to help!
Thank you!! My vacuum is back to working great again thanks to you 🙂
Awesome! You are welcome!
The suspense music alone was worth a thumbs up 😂
Thank you for the thumb...glad you got a kick out of that! It's the exact feeling I got when all that stuff came out, lol. Just seemed appropriate. :D
Thank you! Mine was seriously clogged with hair balls inside the bearing housing. Works great now.
Awesome! Great job!