I wish I would have rebuilt the original carb on my grizzly. I just went and bought a cheap $35 carb on Amazon and it’s lasted a couple months and the float sticking or something. Doing exactly what yours is doing.
Thanks buddy, you saved me. Hey whats the rebuild kit number on that Mikuni for the yama griz 600 2000? and is there a cheaper carb I can buy to put on the bike just to sell it? Thanks again! Subscribed!
I just got a 2000 Grizzly 600 that was neighbour next to the sea... Everything on this quad was a rust bucket... Every single nut and bolt exposed to the elements where badly rusted... I had to Dremel cut almost everything to get to the carburetor and even on the carburetor... What a mess....
I see these carburetors for about $40. Is it really worth the rebuild or are these replacement carburetors ok?. I even found one on Wal-Mart. Com for $37.00.
@@connorwilson8696 I got a new one for $29. I also got a rebuild kit for the old original carb. Now I have the Yamaha carb as a spare for when Chinese carb fails. It's about a month out and doing great so far.
Could you please send me a video on how to hook up a new choke on my 1999 Grizzly 600 wheeler, I’ve tried to find a video or some kind of instructions on how to do this. Any help I would greatly appreciate it, thank you Sir
How do you adjust the float on this carb? My carb leak fuel all the time. now the atv backfires badly when i start it (it will not run). got the carb out but looking for the float adjustment
Sean u gotta bend the little tab down and it’s backfiring because gas got in the top cylinder and fouled out the spark plug so buy a new spark plug and these carbs are so cheap I’d just buy a new one off amazon for 50$-70$ worth doing that just to have a brand new one! Good luck
my carb was leaking from the overflow tube. i cleaned carb and replaced all jets (repair kit). Now when i test the new needle valve, it does NOT pass air. when using an air compressor (fuel inlet) it does BUT it blows out of the whole valve from sit. My question is, does the small pin in the valve suppose to pass the air and stop when compressed?
Scott where can I get a carburetor kit and a muffler for 2000 grizzly 600 Yamaha I cold freedom country ATV they don't have one do you know anybody else besides the dealer
Every year I have to rebuild my carb. Thank you so much for a great video.
Great Video, great teacher and Explanation!!!
you just saved me money and a trip to the repair shop!!! Thanks for posting this video
Great video
I’m loooking for a video of how to get the carb off the quad, but this will definitely help when I get it off!
Great video, I’m fixing to do exact same carb change on a 2002 model.
I wish I would have rebuilt the original carb on my grizzly. I just went and bought a cheap $35 carb on Amazon and it’s lasted a couple months and the float sticking or something. Doing exactly what yours is doing.
You've been a great help, man. Thanks so much.
Good information thanks for the video
Thank you Scott this is gonna work out perfect for me I subscribed
Thanks buddy, you saved me. Hey whats the rebuild kit number on that Mikuni for the yama griz 600 2000? and is there a cheaper carb I can buy to put on the bike just to sell it? Thanks again! Subscribed!
Isn't that the fuel mixture screw?
My favorite way to get those 4 screws out is a dewalt impact. Works way better way easier and ofcourse faster
Scott where can I buy a carburetor for year 2000 Yamaha grizzly 600I saw your video and you're very knowledgeable about
Johnny tanks 35$ On eBay
I just got a 2000 Grizzly 600 that was neighbour next to the sea... Everything on this quad was a rust bucket... Every single nut and bolt exposed to the elements where badly rusted... I had to Dremel cut almost everything to get to the carburetor and even on the carburetor... What a mess....
whats the part number for that rebuild kit?
I see these carburetors for about $40. Is it really worth the rebuild or are these replacement carburetors ok?. I even found one on Wal-Mart. Com for $37.00.
Bear Bridges a factory carb from yamaha is 400 canadian.. so i bought one off amazon.. cant get the needle and seat to stop leaking cheap junk
it was 50 bucks might get lucky might not factory is always better
@@connorwilson8696 I got a new one for $29. I also got a rebuild kit for the old original carb. Now I have the Yamaha carb as a spare for when Chinese carb fails. It's about a month out and doing great so far.
does the kit come with the o ring on the float?
Could you please send me a video on how to hook up a new choke on my 1999 Grizzly 600 wheeler, I’ve tried to find a video or some kind of instructions on how to do this. Any help I would greatly appreciate it, thank you Sir
How do you adjust the float on this carb? My carb leak fuel all the time. now the atv backfires badly when i start it (it will not run). got the carb out but looking for the float adjustment
Sean u gotta bend the little tab down and it’s backfiring because gas got in the top cylinder and fouled out the spark plug so buy a new spark plug and these carbs are so cheap I’d just buy a new one off amazon for 50$-70$ worth doing that just to have a brand new one! Good luck
my carb was leaking from the overflow tube. i cleaned carb and replaced all jets (repair kit). Now when i test the new needle valve, it does NOT pass air. when using an air compressor (fuel inlet) it does BUT it blows out of the whole valve from sit. My question is, does the small pin in the valve suppose to pass the air and stop when compressed?
Float bowl screws get replaced with Allen head screw's for easier disassembly on the trail
So my easier that those Philips heads
Scott where can I get a carburetor kit and a muffler for 2000 grizzly 600 Yamaha I cold freedom country ATV they don't have one do you know anybody else besides the dealer
Johnny tanks amazon
Carb is 40$
Whole new carburetor is like $50 on Amazon.
They work for less than a month on fifth one tired of taking them off on always buy warranty but it’s just free shit
eBay to very cheap
Most of the time even cheaper than amazon