How To - Yamaha Kodiak 400 - Complete CARBURETOR Clean Rebuild Carb Kit - Grizzly Rhino Bear
HTML-код
- Опубликовано: 10 май 2019
- We are rebuilding an 2006 Yamaha Kodiak 400 4x4 ATV Carburetor. We will describe in detail the parts and functions of this carburetor.
Full Service: amzn.to/36OE8zX
Air Filter: amzn.to/3fajQoz
Don't Forget These: amzn.to/3nOpAYj
Carb Kit: amzn.to/2Kpapq5
Carb Cleaner: amzn.to/3n7yi4M
Engine Oil: amzn.to/3tBShuH
Differential Oil: amzn.to/3egb2NW
Link to our pullers: www.ebay.com/itm/332997722043
For the first Engine Tear Down video check out:
• HOW TO - Yamaha Kodiak...
For more service videos on the Yamaha ATV check out:
• HOW TO - Remove Centri...
• DON'T MESS THIS UP - Y...
• How To - Yamaha Grizzl...
Excellent Carb Comparison: • Chinese Unbranded Knoc...
Mid Nebraska Motorsports YT
PO Box 23
Central City, NE 68826
VENMO is: @midnemotorsports
Check out my eBay store at: stores.ebay.com/midnebraskamotorsports
Shop for parts at: midnebraskamotorsports.com
Instagram: / midnebraskamotorsports
Patreon: / midnebraskamotorsports
All the shit I see
I have to give you a lot of credit !
You're not here talking about stupid crap or blabbing about a 7 year itch
Right to the point detailed and there's no delay
Great video !
Keep it going
This an awesome tutorial for almost all carbs but I have had the worst time finding a lot of videos for a 05 kodiak 450. Like top end, timing, TDC, torque specs while working on it....ect..ect...ect..., hell I could go on and on but watching some of your videos I have been able to rebuild my entire motor even though you're working on a different model. I appreciate you and your know how videos! They are great! Just one video I wish was fixed and it's the tear down video but I still got what I needed from it just from watching.
Too the point, professional and explained in detail with correct part names = Excellence.
Thank you for this awesome video !! I was cleaning my carb up and got the main and secondary jets mixed up and wasn’t certain which went where ..... you got me on the right track ,.. thank you again 😊
I’ll have to watch it again and pause it as I rebuild my carb.. lol.. Thank you!!!
Thanks for posting, informative 👍
Good video. This is what I was looking for. I'm going to do mine today. I have a 2005 Kodiak, it sat for 5+ years. The old gas came out looking like iced tea, brownish. I have drained it and refilled with non-ethanol Sunoco. Hopefully I'll be riding today.
very well detailed video awesome job
Dude your video save my butt thank you very much for posting this it is a Very detailed and educational video!
MAGNIFICENT VIDEO.
Excellent video! Very thorough and detailed
Thank you. And thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/
Good job
Good vid mate. It really helped me out today
Love to hear that! Thanks for watching! Let us know if you need any parts. www.midnebraskamotorsports.com/
great video thanks
Awesome. I love to read a comment like this. It inspires me to keep on making these videos! Thanks for watching and the comment. Hit that subscribe button, if you will. www.ebay.com/str/midnebraskamotorsports
I’m about to clean a 2003 660 Grizzly. Hopefully similar 😊
Great video! Any idea what may cause random throttle acceleration with an 05 BigBear 400 carb.
Thanks
Thanks for that informative video. Do you know what the small jet is on the intake port?
Thanks for an excellent video! Two questions. Do you have a link to a specific carburetor kit and diaphragm that you would use? Also are the aftermarket carburetors any good? I have had very poor results with some aftermarket carb kits. 1996 Yamaha 400 Kodiak thanks.
Yes I got the sequence of the tiny washers on the diaphragm plunger messed up and discovered that after I re-installed the carb.
I see the idle screw but what other screws can be used to make adjustments? Is there a pilot screw?
What about the 2 jets at on the side of the carb. On the intake side. Seems to look like 2 jets about halfway up the carb at 9 and 3 o clock. Does not seem to be a way to remove them. What are they for. Is there a way to remove them? Are they important?
Do you have any diagrams that outline the connections and where they go?
How many turns does the throttle cable spring set screws need to be from out?
My quad is choking when i give it gas idle is fine i can go like 15 or 20 km could it be my float?
Any advice for a 2002 Yamaha big bear that will start. Rev super high. Backfire and then die? And not crank back easily? I need some serious help. Either that or I’m about to buy a new carb and throttle cable. I’m tired of messing with it.
I like the video just wish it went through breaking down the entire carb completely, I got a few parts that came out when I flipped it over that I’m not sure which port/hole they came out of
Doesn't this video go through it completely?? Lemme know. Thanks for watching!!
@@MidNebraskaMotorsports it cover the majority but I was hoping to see the seat screw taken off and seat taken out along with the air fuel mixture screw
Made progress with mine, I cleaned the carb and it went from dying instantly to running but now it won’t stay running. Could it be a clogged fuel line/ filter or something else with the carb?
Might have a clogged fuel petcock (screen I believe on it). More than likely though there is still a little something in the carb. I would pull the bowl and remove the pilot. Also make sure you 've got good gas. Also make sure there isn't any debri in the bowl when removing it. Let us know what you find. Thanks for watching and the comment. Let us know if you have any questions or need parts: www.ebay.com/str/midnebraskamotorsports
Had a bad gas situation that forced a carb clean. Got it to start on choke. But will not idle and backfires with throttle. Is that a problem with the pilot jet or the mixture screw?
I cleaned mine so many times and it will not go past half throttle, yet if I throw some starter fluid in there it revs right up. The only way to get it psst half throttle is to choke it
@@MidNebraskaMotorsports bought a new diaphragm and it didn't fix it. Bought a new carb and it did. Got me
If my kodiak when I let go gaz it back fire but if choke on or i brake it don't back fire what could it be
I am a little confused by your question but I would have to say you have an air leak or pilot jet issue. Might be a deeper problem. Valves / timing, but I would start with the carb issue. MAKE sure you can see all the way through your pilot jet. Also spray carb and check cleaner on and around the intake boots. If you atv revs up, you have an air leak. Let me know what you find.
So is the carburetor the same as on the grizzly 350?
Nope different carburetors. They all looks similar from a distance and honestly if you are just watching to learn how to clean this video will work great, but I wouldnt swap the 350 and 400 carbs. Let us know if you need an OEM carb: www.ebay.com/str/midnebraskamotorsports
I just cleaned my carburetor today and I got some carb cleaner on the diaphragm do you think that will cause issues
Maybe
Same carb for 1999 kodiak 400?
HMMM, similar but not identical. I should have videos on the 99 Kodiak 400. Check them out!!
Can I send my carburetor to you to have the carburetor rebuilt?
for sure. we do it all the time. Thanks for watching. Reach out via email for a quicker response. sales@midnebraskamotorsports.com also check out: www.ebay.com/str/midnebraskamotorsports for any parts you may need.