Ian, just a heads-up. When doing the ham full power test the reason the noise floor across the whole band being viewed by the specan is going up is because your saturating something in the receive chain of your specan. It's going nonlinear. Put a 10-20 db pad on the input and see if you get the same results. I think you'll find things look much nicer and is actually representative of what's being transmitted at full power. Keep up the good work! ~pk
Glad you pointed this out. I do indeed put air-units on some planes without flight controllers. This would have caught me out, had I not known. Cheers for that.
Oh so need an FC for full power. Crap I was going to make it swappable on some of my planes without FCs. I guess I'll be opening a ticket with DJI to suggest/request this power and Inav osd support
I'm wondering about just having something like a tiny arduino board that just sends the arming msp command a few minutes after powering up... Then attach that to the air unit and you have a swappable FPV system. Or just use one of the other two digital FPV systems and drop DJI like a sack of potatoes as we should. 😉
So just to confirm once the cfg files is placed on an SD card and more channels are available (higher power unlocked when the O3 or Avata is armed/flying) can you just leave it in auto for channel selection? DO you still get the same benefits rather than having to txt which channels are best manually? Keep up the great work!
Thank you for this very interesting and very detailed video. I understand that the transmission power of the Air unit 03 is 1W in FCC mode and 25 mW in CE mode. I want to know if the Goggle 2 are only a receiver if they are also a transmitter? If the Goggle 2 are a transmitter, what is their transmission power in FCC mode and in CE mode?
Cool that you already tested the "goggles walk away to invoke dynamic power" test (which I was thinking about). If the weather stays as crappy I will try to test this anyways here to confirm. bummer that the O3 needs arm signal to go to full power. I thought we are passed the phase where we need salvaged old Fcs for the Vista backpack to just see Volts (as I did for non FC planes). Now as I understand the O3 can display input volts WITHOUT the need for an FC - but it needs MSP arming command ;)) one step forward, one back :) Have you tweaked the live image of O3 on Goggles V2? Or did you "just" fly with Goggles2? In my comparison the Goggles V2 look quite dark with O3 compared to Vista. And I wasnt even using 120fps mode.... greets, Mario
Allright guys. I need to apologize. the Ham hack still works. There was a series of mistakes on my side after I purchased the RC2. When I tested the mini 3 I noticed that the penetration was less than usual, then I tested the AVATA, and the penetration was the same. So I was wondering, What on earth happened? So then I removed the HAM file, and then I retested penetration and it was the same. But today after spending the weekend changing firmwares on all my devices, and testing and what not. I FINALLY resetted the goggles 2. AND ONLY THEN I SAW THE TRUE CE LIMITS. And they were terrible!! Much worse than what I was used to. SO Then I wondered why the penetration wasn't the same. So I went on my recordings to see when was the last time I flew here with the AVATA, and it was last month when there was less vegetation... Im so relieved to know that I didn't spend thousands for nothing. I was already putting things up for sale :-). Again sorry to all for the FALSE ALARM. Now it's super awesome I love the RC2 motion controller, much better than the sticks for both drones and I only hope that permit the full 500m height limit now for the mini 3 when using the motion controller like they do for the avata PS HAM file also works for mini 3 when used with RC2
8:20 Wait, is it just swamping the entire spectrum there? So this system won't work at all with friends flying other systems - eg one person flying O3 and the other flying HDzero? Edit: Also, odd that we don't see it again in the "Testing" section of your video?
hello Sir and thank you for this FANTASIC video. However, here is a question from a TOTAL NOOB. Now that I have done that, what do I choose? Is 20mhz better than 40? Which one should I pick, and after choosing one, do I leave it in whatever random channel, or do I need to select a specific one since it's now manual?
Excellent video and great care in the content, form and clarification of details....but it is not explained at any time how to activate the FCC mode, in the way that you say you have discovered, because as credulously we viewers of this On the other hand we think what it is with the inclusion of the HAM file....and well we see that it is not exactly like that. Could you share that method that you discovered is NOT through with this HAM file???
Great info! I need to get an 03 unit and find out what happens or if it even works with the TBRC OSD boards. The way our board works is essentially sending an arming code via MSP to take the system to max power on the original system perhaps it will do the same. Now I am wondering since Wezley has taken the goggles 2 and 03 airunit out so far if the required firmware update to make the V2 goggles play together with the 03 airunit if it also ends the 13.3km hard limit in the previous version airunits. LOL this shit makes my head spin somedays. :P
Very interesting! Slowly but surely we are getting more insight into the new O3 system. I have to ask. When we update our Vistas and Air Units V1 to be compatible with the new O3 Goggles 2 are the Vistas and Air Units V1 working with V1 Goggles after this update like before? I Hope because than i can use the new Goggles 2 as daily and my old V1 Goggle as spare or for friends and spectators.
Hi, I live in New Zealand, so CE mode is about 25 mW, I can only fly the dam DJI FPV about 250 - 300m away before I start loosing signal. So the Ham file is going to make a big difference. Now do I also have to put the Ham file on the drone? Since the V2 goggles will put out more power, but the drone also has to increase power back to the goggles for video. This is where I can not find any info about increasing the drones power back. Or am I still going to be restricted from low video signal back?
Did you find a fix? Also a kiwi and waiting for vista and 03 units from china. Worried they'll be in CE and still not sure if these hacks will work with current firmware etc. New to DJI.
Good to hear. This arvo got only 1.5km with goggles 2 and avata (at Papamoa beach too! Haha) Let me know if you’re moving on any of your Dji gear. New to digital and starting proper builds for vista and potentially 03 units from aliexpress. Just worried about all the region and firmware lock outs now.
I fly planes with no FC for aerobatics and long range cruising using the old DJI system where you could set the system to "auto temp control off" which gave the full power you selected once you powered up without needing to arm the system. This gave good range. If there is no way to do this on the goggles 2, I may need to cancel my order for the new system.
@@holmesteadready Yes that's an option but I don't need a FC for my flying style. I have adopted an Arduino based system which sends an arming signal to the AU and this seems to work fine.
On the goggles v2 I have the option to disable the o3 low power mode so it is in full power regardless to the motor state. The goggles 2 should have the option, but it is DJI so I'm not sure. It is on the v2's though, so there's hope.
@@PuppetFPV Hi. I have the 03 air units and the new goggles 2. I can confirm that when you switch low power mode off in the goggles, although the bit rate increases it does not go to full power and you have limited range. It only goes to full power when the system receives an arming signal. This is no problem with drones with a FC, but I fly planes without a FC so have used a very clever Arduino board mod to send the arming signal which also starts the recording. The instructions for this can be found by searching ramiss Arduino dji. It's quite easy and I know nothing about Arduino LOL.
Does this also work when using an old air unit/vista with the goggles 2? Compared with old air unit with fcc in combination with the v2 goggles. Thatd be interesting 🙏
I couldnt find it so I am asking, any news / test on ham file with the goggles 2 ? I am using them with the o3 air unit and It worked channel wise, but still just one km range roughly... any idea / help ? I guess there is no way to increase the output in betaflight, and in the goggles obviously not. Thanks in advance !
Hello Ian. Excellent content as always. Just a quick question. About the ham and naco file. I own a dji fpv drone with the latest firmware plus the ham file. Should I incorporate and the naco file at the same sd? Will i get any benefit by this or it is totally different at the previous system. Ver firmware 01.02.0000 Any answers are welcome
I put Naco as well as Naco pwr and the ham on my memory card in my goggles and my avata and all my vista's so everything has all 3. Any issues with what iv done?
Dear Mad! I use g2 with og air unit with og Dji cam and as the cam is 1080p I get 1080p live view and record in the g2. I also have Vista, if I attach an og Dji cam to it, will I get 1080p live view and record in g2? Thx!
Maybe someone can answer me? I wanted to test the hack and while the connection to the racer was already active on manually changed to channel 2 in 40mhz. So, no restart of the drone! When flying while looping, the VTX connection suddenly went away completely. Is the problem known? On the other flights I no longer had the problem (after restarting the drone). Thanks
Great Video. Just one question. How did you test FCC and CE mode when not testing in CE AND FCC country? Real FCC should only work in FCC countries. CE should only work in CE countries.
Nice video 👍. Have you done some tests with another vtx on at the same time? I'm interested what happens when in auto mode. Will it avoid the other frequency?
Thanks for your video. Just to make sure: ham file really cranks up the power much higher than CE so we can call it “FCC” hack. Not sure if i got correctly “low power mode” - this seems to have nothing to do with the signal strength/power and works independently from arming command (which in fact increases the actual power to a full whack) so what does it actually do? Is is to preserve the battery at the cost of picture quality? So in simple words: if i want the best range and best picture quality I should put the ham file on both ends and disable “low power mode” on goggles, am I correct? My config is o3 and v2 goggles. Thanks in advance!
Hi all. If anyone sees this question and has an answer, please help. If I update firmware on my caddx vistas to work with goggles2/integra, does the full power mode still work without arming command? I ask because after updating the vista, all the menus look just like the o3 air unit. So if I turn off low power mode on the vista, will I get full power like I used to or will I need arming command from a flight controller? Thanks
Hi Ian, What I'm always wondering is does it make sense to use only certain channels when the unlocked Vista or O3 gives you the additional channels in order to have stronger signal but stay at least in the right frequencies in CE countries. I live in Germany and since I unlocked everything I often think of minimizing the risk with no effort. I'm always flying alone and I don't care on which cahnnel I fly.
Funzt der hack? Wie is die penetration bei wäldern oder indoor? irgendwie kann niemand genaue angaben machen. werd meine avata morgen direkt zurückschicken wenn sie kommt
Very interesting. Do you think if while activating/updating the O3 Air unit in Europe but using a VPN in the US you'd get it to FCC mode? How did you get it to "Proper FCC" mode at 11.50 in the video?
Hello drone purchased in January 2023 IN ITALY with update 01.02.0015 the text file is not supported, there is by chance a new ilnk for unlocking in FCC
The ham file hack works great with the Avata and motion cintroller 2 (I'm using integras). Does anyone know if this works with mini 3 Pro now that it supports goggles and motion controller?
can i race the O3 air unit? I needs to be limited to 25mw and STAY on one raceband channel. Do you think DJI will patch in support for this in a future firmware?
Hello Ian: Please forgive my noob/layperson/dullard question here. Ive a new avata, goggles 2, and motion controller. Due to poor range for video transmission i sought ways to extend range and found my way to your Sept 6th “DJI Avata & FPV Drone - Free FCC Hack” video. So last night before installing your Ham hack onto my SD card i checked up on your channel for an updates i should know of and came across this video, which i viewed. Again please forgive my dullardiousness, but as of now, is the Ham hack you described in september still likely to give me extended video range for my goggles 2 video transmission [ loss showing up as the ever decreasing “HD” signal bars in my goggles 2 display], or does all the testing youve done mean that i shouldnt bother as there is no power increase for transmission of HD video signal from drone to goggles2? And if that tragedy is true, is there anything else i can do to get extended range? Thanks much.
I have the same question. I have Goggles V2 and motion controller. I cannot see channels, there is no menu. And is that hack of benefit in non-USA , non Europe, like let's say Singapore or Australia?
@@axe3920 You can use the ham file to view the channels. It has worked on mine. You shouldn't need the FCC hack if it was bought outside EU or CE country. If you are still getting terrible range. I bought a FCC hack that has seriously improved the range. It wasn't expensive but is an annual license.
Seems like the ham mod is a complete butthead move. Noise level massively increased and would knock out any range benifit if flying with a buddy. (Ce kids just do fcc hack)
After doing the ham file I'm not seeing the ultra wide fov option in my goggles. Have I just got something wrong in my settings, any tips ? I'm also on the newer firmware and running the v2 goggles, not the goggles 2.
@Mads Tech I looked, that's where it was before. It only has wide and normal. I've tried 16:9 and 4:3 in different resolutions and framerates but ultra wide isn't there for me anymore.
Can you confirm which firmware versions you were testing? I see DJI have released a batch of new firmware updates today for the Googles 2 and the Avata Avata: v01.02.0000 Goggles2: v01.03.0000 Goggles v2: v01.05.0000 RC2: v02.00.0400
I fly hardcore aerobatics, and this O3 system just doesn't hold a lot of appeal for me. I don't want to wear a bunch of Crrp on my face; just give me a nondescript black box digital receiver with an XT60 connector and a real HDMI port out. If you still wanted to wear goggles you could connect it to something that does goggles better, like some old Fatsharks, or virtual reality goggles like the Occulus Quest 2 or the like... that are cheaper and can do way more than the Goggles 2.
Ian, just a heads-up. When doing the ham full power test the reason the noise floor across the whole band being viewed by the specan is going up is because your saturating something in the receive chain of your specan. It's going nonlinear. Put a 10-20 db pad on the input and see if you get the same results. I think you'll find things look much nicer and is actually representative of what's being transmitted at full power. Keep up the good work! ~pk
Glad you pointed this out. I do indeed put air-units on some planes without flight controllers. This would have caught me out, had I not known. Cheers for that.
Fascinating indeed. Thanks a lot for testing, Ian! 😃
Stay safe there with your family! 🖖😊
The ham hack works like a champ on the newest googles v2 and O3 air unit. Thanks a bunch for this information.
Worked like a charm. Instant range.
Thank you
Thanks for all the findings, it was very interesting to watch now that I am setting up my O3 and my V2s.
Did you figure everything out ok?
Oh so need an FC for full power. Crap I was going to make it swappable on some of my planes without FCs. I guess I'll be opening a ticket with DJI to suggest/request this power and Inav osd support
I'm wondering about just having something like a tiny arduino board that just sends the arming msp command a few minutes after powering up... Then attach that to the air unit and you have a swappable FPV system. Or just use one of the other two digital FPV systems and drop DJI like a sack of potatoes as we should. 😉
i love how you dont need to use a flight pack to update the 03 on the computer the 03 does not even get warm on updates = )
So just to confirm once the cfg files is placed on an SD card and more channels are available (higher power unlocked when the O3 or Avata is armed/flying) can you just leave it in auto for channel selection? DO you still get the same benefits rather than having to txt which channels are best manually? Keep up the great work!
Nice work 👏 👌 👍
The little peak difference between FCC and the Ham File is a bit suspicious, what is that?
Is it still working on the latest goggles V2 fw 01.06.0000 and O3 with latest fw?
So I’m glad I avoided it because I fly mainly planes FPV with no fc
Can you do a tutoriaL on connecting flight controller and getting msg settings and canvas mode setup? I’m stumped
Thank you for this very interesting and very detailed video.
I understand that the transmission power of the Air unit 03 is 1W in FCC mode and 25 mW in CE mode.
I want to know if the Goggle 2 are only a receiver if they are also a transmitter?
If the Goggle 2 are a transmitter, what is their transmission power in FCC mode and in CE mode?
Cool that you already tested the "goggles walk away to invoke dynamic power" test (which I was thinking about). If the weather stays as crappy I will try to test this anyways here to confirm.
bummer that the O3 needs arm signal to go to full power. I thought we are passed the phase where we need salvaged old Fcs for the Vista backpack to just see Volts (as I did for non FC planes).
Now as I understand the O3 can display input volts WITHOUT the need for an FC - but it needs MSP arming command ;)) one step forward, one back :)
Have you tweaked the live image of O3 on Goggles V2? Or did you "just" fly with Goggles2? In my comparison the Goggles V2 look quite dark with O3 compared to Vista. And I wasnt even using 120fps mode....
greets, Mario
I believe you still need an FC to get O3 supply voltage. I’m trying ways to get full power without an FC too.
well done
You are talking about "proper FCC mode" and "FCC ham file mode"...I know how to do ham file mode but how do I switch goggles to the proper FCC mode?
Allright guys. I need to apologize. the Ham hack still works.
There was a series of mistakes on my side after I purchased the RC2.
When I tested the mini 3 I noticed that the penetration was less than usual, then I tested the AVATA, and the penetration was the same. So I was wondering, What on earth happened?
So then I removed the HAM file, and then I retested penetration and it was the same.
But today after spending the weekend changing firmwares on all my devices, and testing and what not. I FINALLY resetted the goggles 2. AND ONLY THEN I SAW THE TRUE CE LIMITS. And they were terrible!! Much worse than what I was used to.
SO Then I wondered why the penetration wasn't the same. So I went on my recordings to see when was the last time I flew here with the AVATA, and it was last month when there was less vegetation...
Im so relieved to know that I didn't spend thousands for nothing. I was already putting things up for sale :-).
Again sorry to all for the FALSE ALARM.
Now it's super awesome I love the RC2 motion controller, much better than the sticks for both drones and I only hope that permit the full 500m height limit now for the mini 3 when using the motion controller like they do for the avata
PS HAM file also works for mini 3 when used with RC2
8:20 Wait, is it just swamping the entire spectrum there? So this system won't work at all with friends flying other systems - eg one person flying O3 and the other flying HDzero?
Edit: Also, odd that we don't see it again in the "Testing" section of your video?
FCC mode doesn’t Change anything other than the lines on the transmission graph no extra distance or connection for me maxing out about 800m
hello Sir and thank you for this FANTASIC video. However, here is a question from a TOTAL NOOB. Now that I have done that, what do I choose? Is 20mhz better than 40? Which one should I pick, and after choosing one, do I leave it in whatever random channel, or do I need to select a specific one since it's now manual?
O3 system 23,4Km hard limit confirmed!
Interesting.... Source?
@@smackfpv ruclips.net/video/-bYz3QuYT84/видео.html
Excellent video and great care in the content, form and clarification of details....but it is not explained at any time how to activate the FCC mode, in the way that you say you have discovered, because as credulously we viewers of this On the other hand we think what it is with the inclusion of the HAM file....and well we see that it is not exactly like that. Could you share that method that you discovered is NOT through with this HAM file???
It is just the ham file.
@@MadRC thx alot!
Hi, after appling the hack, should we leave the channels on auto or select a manual channel?
Great info! I need to get an 03 unit and find out what happens or if it even works with the TBRC OSD boards. The way our board works is essentially sending an arming code via MSP to take the system to max power on the original system perhaps it will do the same. Now I am wondering since Wezley has taken the goggles 2 and 03 airunit out so far if the required firmware update to make the V2 goggles play together with the 03 airunit if it also ends the 13.3km hard limit in the previous version airunits. LOL this shit makes my head spin somedays. :P
Very interesting! Slowly but surely we are getting more insight into the new O3 system. I have to ask. When we update our Vistas and Air Units V1 to be compatible with the new O3 Goggles 2 are the Vistas and Air Units V1 working with V1 Goggles after this update like before? I Hope because than i can use the new Goggles 2 as daily and my old V1 Goggle as spare or for friends and spectators.
I'm watching for this too. But I am not hopeful.
I struggle a bit trying to see the mouse while you move it, Could change it to a bigger arrow ? Thank you so much for your videos
8:26 might be a useful moment for people
Hi, I live in New Zealand, so CE mode is about 25 mW, I can only fly the dam DJI FPV about 250 - 300m away before I start loosing signal. So the Ham file is going to make a big difference. Now do I also have to put the Ham file on the drone? Since the V2 goggles will put out more power, but the drone also has to increase power back to the goggles for video. This is where I can not find any info about increasing the drones power back. Or am I still going to be restricted from low video signal back?
Did you find a fix? Also a kiwi and waiting for vista and 03 units from china. Worried they'll be in CE and still not sure if these hacks will work with current firmware etc. New to DJI.
Yeah I think it helped. Managed 6km in the end at Papamoa beach. I dont use it alot now, still like it but would rather fly helis than drones.
Good to hear. This arvo got only 1.5km with goggles 2 and avata (at Papamoa beach too! Haha) Let me know if you’re moving on any of your Dji gear. New to digital and starting proper builds for vista and potentially 03 units from aliexpress. Just worried about all the region and firmware lock outs now.
@@prov418 yip, just gotta figure out how to contact safely
I fly planes with no FC for aerobatics and long range cruising using the old DJI system where you could set the system to "auto temp control off" which gave the full power you selected once you powered up without needing to arm the system. This gave good range. If there is no way to do this on the goggles 2, I may need to cancel my order for the new system.
Why not just run an fc ?
@@holmesteadready Yes that's an option but I don't need a FC for my flying style. I have adopted an Arduino based system which sends an arming signal to the AU and this seems to work fine.
@@alanpaul1234 cool, how did you suss out what the arming signal is?
On the goggles v2 I have the option to disable the o3 low power mode so it is in full power regardless to the motor state. The goggles 2 should have the option, but it is DJI so I'm not sure. It is on the v2's though, so there's hope.
@@PuppetFPV Hi. I have the 03 air units and the new goggles 2. I can confirm that when you switch low power mode off in the goggles, although the bit rate increases it does not go to full power and you have limited range. It only goes to full power when the system receives an arming signal. This is no problem with drones with a FC, but I fly planes without a FC so have used a very clever Arduino board mod to send the arming signal which also starts the recording. The instructions for this can be found by searching ramiss Arduino dji. It's quite easy and I know nothing about Arduino LOL.
Thanks for the video. Very useful information,
However..................
Does this also work when using an old air unit/vista with the goggles 2? Compared with old air unit with fcc in combination with the v2 goggles. Thatd be interesting 🙏
I tested in Fly, not work's for me wit DJI FPV Googles V2, I try all the Frequencies and channels.
Have you done this testing with DJI 03 to goggles 3? Just set mine up and was going to do the ham hack on the goggles
Yes it's all the same on O3 & G3 I have a video on it.
And can you really investigate the missing msp osd? This really bugs me. No osd from inav and ardupilot, so no plane support :(
Ardupilot works in compatibility mode with Bf. Inav does not n
@@MadRC it does? I have to check it, thanks! Edit: Thanks! Works in Mode 42, somehow i was missing an option.....
Ham cfg in Avata goggles doesn't work for me at all, still cannot fly more than 800 metres.
Does the Ham file work if the quad is equipped with an o3 air unit and a crossfire receiver?
Did they ever update the firmware to allow full power to be activated when turning off low power?
Nope
I couldnt find it so I am asking, any news / test on ham file with the goggles 2 ? I am using them with the o3 air unit and It worked channel wise, but still just one km range roughly... any idea / help ? I guess there is no way to increase the output in betaflight, and in the goggles obviously not. Thanks in advance !
Maybe dynamic power means the difference when arming?
Or it outputs more power when the bitrate is low.
i cant unlock the full pottencial of the o3 whit out a dji controler? i onli hace a elrs boxer controller.
Hello Ian.
Excellent content as always.
Just a quick question.
About the ham and naco file.
I own a dji fpv drone with the latest firmware plus the ham file.
Should I incorporate and the naco file at the same sd?
Will i get any benefit by this or it is totally different at the previous system.
Ver firmware 01.02.0000
Any answers are welcome
Also want to know
And if I need naco pwr
Part 15 max power would be different than part 97 if these go beyond 1 watt
I put Naco as well as Naco pwr and the ham on my memory card in my goggles and my avata and all my vista's so everything has all 3. Any issues with what iv done?
Dear Mad! I use g2 with og air unit with og Dji cam and as the cam is 1080p I get 1080p live view and record in the g2. I also have Vista, if I attach an og Dji cam to it, will I get 1080p live view and record in g2? Thx!
Maybe someone can answer me? I wanted to test the hack and while the connection to the racer was already active on manually changed to channel 2 in 40mhz. So, no restart of the drone! When flying while looping, the VTX connection suddenly went away completely. Is the problem known? On the other flights I no longer had the problem (after restarting the drone). Thanks
is it ok to turn the uart off to the air unit when flying line of sight
Ian, is it the same for vista and old air unit with just the file on the goggles or do i drop the file on them like the naco hack?
I'm confused is the fcc hack and ham hack the same thing?
Cli command for arm mode.
Hey Mads Tech do you ever interact with your comments?
No never. I never reply to any of them at all. Never never never.
Great Video. Just one question. How did you test FCC and CE mode when not testing in CE AND FCC country? Real FCC should only work in FCC countries. CE should only work in CE countries.
Does mavic3 have same signal basic haracteristics?
How are you able to put it in FCC mode ??
Nice video 👍.
Have you done some tests with another vtx on at the same time? I'm interested what happens when in auto mode. Will it avoid the other frequency?
It will.
@@MadRC On the DJI 03 Air Unit is there a way to bypass the FC to allow the low power mode to be removed? I have my unit connect to a RC car.
Thanks for your video. Just to make sure: ham file really cranks up the power much higher than CE so we can call it “FCC” hack. Not sure if i got correctly “low power mode” - this seems to have nothing to do with the signal strength/power and works independently from arming command (which in fact increases the actual power to a full whack) so what does it actually do? Is is to preserve the battery at the cost of picture quality? So in simple words: if i want the best range and best picture quality I should put the ham file on both ends and disable “low power mode” on goggles, am I correct? My config is o3 and v2 goggles. Thanks in advance!
Ham file only on the goggles sd card . Not on the air unit. cheers
Just a question after you have installed the ham file do you have to keep it in manual signal or can you put it back into auto?
You can use either. It’s fine you will still have fcc power level
Hi all. If anyone sees this question and has an answer, please help. If I update firmware on my caddx vistas to work with goggles2/integra, does the full power mode still work without arming command? I ask because after updating the vista, all the menus look just like the o3 air unit. So if I turn off low power mode on the vista, will I get full power like I used to or will I need arming command from a flight controller?
Thanks
Sadly no. It behaves the same as O3
Do you not need to put the file on the o3 air unit itself?
No just goggles.
Hi Ian, What I'm always wondering is does it make sense to use only certain channels when the unlocked Vista or O3 gives you the additional channels in order to have stronger signal but stay at least in the right frequencies in CE countries. I live in Germany and since I unlocked everything I often think of minimizing the risk with no effort. I'm always flying alone and I don't care on which cahnnel I fly.
Funzt der hack? Wie is die penetration bei wäldern oder indoor? irgendwie kann niemand genaue angaben machen. werd meine avata morgen direkt zurückschicken wenn sie kommt
How do you do the ham file
Very interesting.
Do you think if while activating/updating the O3 Air unit in Europe but using a VPN in the US you'd get it to FCC mode? How did you get it to "Proper FCC" mode at 11.50 in the video?
Just use the ham file.
@@MadRC as long as that still works…
Hi, is there anything new on increasing the output of the O3 Air Unit? Do the three different channels actually have a different output?
No all channels the same.
is this legal in Europe?
Hello drone purchased in January 2023 IN ITALY with update 01.02.0015 the text file is not supported, there is by chance a new ilnk for unlocking in FCC
The O3 hack works everywhere there has been no change.
@@MadRC strange, I don't know what to do to unlock it anymore
@@crycardfly1618 Have you managed to unlock to FCC yet?
One question... leaving the power on automatic is it always unlocked? Or is it unlocked only manually?
Always when on either mode.
@@MadRC Thanks for the quick response, you are number one in this area🤙
The ham file hack works great with the Avata and motion cintroller 2 (I'm using integras). Does anyone know if this works with mini 3 Pro now that it supports goggles and motion controller?
No it’s for FPV only sadly
can i race the O3 air unit? I needs to be limited to 25mw and STAY on one raceband channel. Do you think DJI will patch in support for this in a future firmware?
I doubt they'll add anything like that. They're focused on the best image quality and nothing else. HDZero is the best link for racing.
Hello Ian: Please forgive my noob/layperson/dullard question here. Ive a new avata, goggles 2, and motion controller. Due to poor range for video transmission i sought ways to extend range and found my way to your Sept 6th “DJI Avata & FPV Drone - Free FCC Hack” video. So last night before installing your Ham hack onto my SD card i checked up on your channel for an updates i should know of and came across this video, which i viewed. Again please forgive my dullardiousness, but as of now, is the Ham hack you described in september still likely to give me extended video range for my goggles 2 video transmission [ loss showing up as the ever decreasing “HD” signal bars in my goggles 2 display], or does all the testing youve done mean that i shouldnt bother as there is no power increase for transmission of HD video signal from drone to goggles2? And if that tragedy is true, is there anything else i can do to get extended range? Thanks much.
Hi, have you made any progress in extending the video range of the goggles?
I have the same question. I have Goggles V2 and motion controller. I cannot see channels, there is no menu.
And is that hack of benefit in non-USA , non Europe, like let's say Singapore or Australia?
@@axe3920 You can use the ham file to view the channels. It has worked on mine. You shouldn't need the FCC hack if it was bought outside EU or CE country. If you are still getting terrible range. I bought a FCC hack that has seriously improved the range. It wasn't expensive but is an annual license.
so after installing ham file, should i turn on or off lowpower mode to get maximum power ?
Low power mode does not affect it. You just need to make sure you always have arming command.
@@MadRC arming command? what is this? a command in CLI ?
@@MadRC pls help!
@@kennyfpv msp on betaflight cli.
@@catmanfpv9213 can you tell exactly command in CLI pls?
Seems like the ham mod is a complete butthead move. Noise level massively increased and would knock out any range benifit if flying with a buddy. (Ce kids just do fcc hack)
Curious what spectrum analyzer software your using here? Is it RTSA-suite?
yep sorry posted to soon. ruclips.net/video/X4fWIag7H88/видео.html
Yes
Do we know what polarity the 03 antennas are?
LHCP rp-sma
After doing the ham file I'm not seeing the ultra wide fov option in my goggles. Have I just got something wrong in my settings, any tips ? I'm also on the newer firmware and running the v2 goggles, not the goggles 2.
It’s under the camera settings
@Mads Tech I looked, that's where it was before. It only has wide and normal. I've tried 16:9 and 4:3 in different resolutions and framerates but ultra wide isn't there for me anymore.
Are you sure that ham file has to go only on goggles and not on O3?
Yes I’m sure.
Can you confirm which firmware versions you were testing? I see DJI have released a batch of new firmware updates today for the Googles 2 and the Avata
Avata: v01.02.0000
Goggles2: v01.03.0000
Goggles v2: v01.05.0000
RC2: v02.00.0400
I fly hardcore aerobatics, and this O3 system just doesn't hold a lot of appeal for me.
I don't want to wear a bunch of Crrp on my face; just give me a nondescript black box digital receiver with an XT60 connector and a real HDMI port out.
If you still wanted to wear goggles you could connect it to something that does goggles better, like some old Fatsharks, or virtual reality goggles like the Occulus Quest 2 or the like... that are cheaper and can do way more than the Goggles 2.
The new HDzero goggles + the Walksnail VRX should do just this beautifully 🤓
Most likely 700mw. Like always
You are very preachy, baldo
Can I ask you what Spectrum analyzed do you use, I have interference in my area and I would like find what area I need avoid