Paint em Gloss Black or stay stock imo. Crazy build on this MSP 6. Thank you so much for info. Getting a 2012 msp 3 with 365hp and 380tq at the wheels this week! So Excited!!!!!!
Before the video even started (thanks ads🙄) I automatically subscribed, and I don't regret it! I have a 09 Mazda 6 with a 2.5L i4, and 6 speed manual. Working on building it to what I think a 2nd gen MSP 6 would be. Love the video man!
What a monster! When that tune is cleaned up. It will be a no prep monster. Be super careful on a prepped surface when dialing that in. That is a hook machine.
Bro I have been following this build for awhile and trying to get my buddy to get his rolling, he did a 2.5 swap on his with a CST4 and that thing screams. I own a 12 speed 3 and just re-did the exhaust full 3inch and now trying to get that new tune. My next go to is new turbo but money and family is getting in the way. Really look forward to seeing more content on this beast. Love the build keep up the great work.
Basil tuned, running 25% e98 bnr4, ST intake manifold, full exhaust 3.5 CAI. Some weight reduction in my speed 6. Mid 13s. Love that car. Adding fuel cell and 1050cc Port injectors to run pure E at boost. Water methane. Trying to see how much HP till the motor goes. Then I'll build for HP like the one in this video. 😁
Spicy 🔥 I was expecting the rear end to be all over the pavement if she hooked but good driving with the clutch. Nice tip with the brake calipers! Send IT!
Thanks so much !!! Installing your hood vent in the next week ! Stay tuned. Ya the calipers are a great idea from Farhan from Damond. Ya that clutch had to be slipped hard to get it out the hole lol
The drive shaft boot wasn't because of the bung though...they all do that. Even my wife's stock 6 ripped the secondary o2 wires off when the boot let go. Kinda scary when you don't know exactly what it is 😂 Great video yet again guys. Love seeing this.
One day, I'd love to get my speed 6 to this point. Currently just running CST4 @ 23lbs on 91. Fighting really bad heatsoak with CS TMIC. Need a front mount BAD. 😜
What kind of Temps are you seeing for boost and coolant? Just curious cause I'm still on a tmic as well but with a shitty ebay manifold but my Temps are relatively decent for where I live
@@FlyLikeRedBull It's been mid 90s here all summer and definitely doesn't help I'm at 3000ft. After 2 or 3 pulls it will climb 140-160F. Have to let her cool down before I can get on it again. Coolant temps ~190F so that's pretty normal, no issues there.
@@RogueRAZR Yeah., I have a CPE tmic and even in michigan 70s my boosted intake temp will go up to 180F after one pull (if i get stuck in any sort of stop and go traffic for a bit.) It works fine as long as the car stays moving though.
Thanks for making these videos, it's been 9 years since I had a stock 6i and getting back to my metal health with a Speed6, thanks for all the knowledge and inspiration! can't wait to turn the first wrench.
Love your videos! Currently in the middle of building my speed 6 rn and it’s red also lol shooting for 650whp! Not excited about buying an x clutch twin disc though😂 it mutilating my wallet! But keep up the awesome work!
I'm running the act xt extreme clutch 6 paddle, it's rated for over 650 ftlbs and is half the cost of a twin disc 👍 I'm sure our gears will strip before anything else at that torque
False, it not half the cost it’s only a couple hundred more for this twin disc. The only problem that we’ve experienced with those ACTs is that at a higher power level they can’t keep up with high rpm flat foot shifting they tend to start locking you out of gears when going to bang the next gear. We were missing shifts with a single disc because of that reason only. Other than that those ACTs are really good.
@@SpoolingUpPerformance yea if you live in the USA 🇺🇸 here in UK after import taxes it's less than half the price , I'm only at 450whp on stock head still at 7250rpm so guess that's why mine is coping fine, anymore I'm sure I'd be experiencing that also, every day is a school day when you own a mazda I suppose , great clean build by the way wish my was as clean 😂👍
Knowing what you are doing with cars and being able to build something like this must be so fun to do.. Damn I'd love to be able to do things like this, and is my goal later down the road, amazing content, one of the best car channels out there, keep it up! Would love to get a tune for my beater ass gen2 speed3, i'm hopeful!
No they’re honestly trash on the speed6 IMO. Pistons are too big in the sense of they demand too much brake fluid so the brakes fade under a lot of performance type driving
Oh man I’m up for the challenge!!! Wanna win some part(s)!! LETS GOOOOOO!!!! 😎🤜🏼🤛🏼😎 BUT really loving the Speed 6 man!! Been around since when you started to build it and the struggles you went thru but look at the beast now!! She is running and killin’ it!!!
@@SpoolingUpPerformance ayy man anything to help you out with your channel!! Just glad to be able to support you!! Been showing a lot of your videos to a lot of people so hopefully they are subscribing to your channel lol 😂
I so wish they made the 3 in AWD. I enjoy the torque steer but pushing high hp it becomes kinda unpredictable. Have an 08 MS3 and looking for a clean MS6 for a sleeper build.
Would love a tune I can't find any for a 04 speed6 this car is insane brother!!!! I can't follow on FB right now but when I can I will!!!! Keep going i wanna see more of this car
Sooo dope bro, damn I can't wait to make bigger power.. literally waiting for the big turbo to get here right now. Ups is lagging dammit haha I could def use a tune lol let's hit the goal ppl
@@SpoolingUpPerformance not a problem! I’m working my way up to your guys build, should be running here soon after 2 years. It’s going to be a really clean engine bay and car with a lot of tasteful upgrades!
Are you using a gen 2 valve cover with the baffling? Also, is there a kit for the venting set up that you have from the valve cover to what i assume an OCC?
@@SpoolingUpPerformance do you have a referral code for them so that you get credit? Also, where did you have the line go to? If OCC then did you have the out flow from that go to atmosphere?
A lot of people actually request that i keep the videos the way I make them because they appreciate the information and processes that are gone through
@@brodilla90 A combination of mazdaspeed forums and youtube. Once you do your own maf calibration and understand what is happening its not to bad. I still havent dived into VVT or VE tables.
Awesome video! i just installed my DSS Rear axles because my OEM ones were bad. Did you have fitment problems on the driver side with stock sway bar bushings? I put my axles on last weekend and just checked the axles and the boot was blown off. the sway bar mount smacked the tightener piece off and basically cut my boot in half (Looked like your driveshaft with the grease everywhere haha) please send a brother some help! I'm hoping they sent me the wrong axle and that's why the fitment was a problem. the only thing my car has that could possibly mess with fitment (which is shouldn't) is lowered springs. if anyone has advice please LMK! if you want photos of my axle boot I'm more then willing to share. I will be in contact with EdgeAutoSports tomorrow about this sadness and it was a pain installing ;-;
Hey buddy do yourself a solid and watch this video. I explain it all. Thanks for commenting I appreciate you ! ruclips.net/video/IzOS70FaOiU/видео.html
@@SpoolingUpPerformance Wow didnt know you had a video explaining everything. Thank you! they are taking the axle back and will fix it just because only the boot is destroyed just bought myself some bushings so that this fitment issue is no longer a problem. thankfully im on stock swaybarlinks :D
Just earned yourself another subscriber :) love the information on these videos. really helping out a broke Marine here who cant be affording to not have a car HAHA!
@@SpoolingUpPerformance I took the liberty of informing edge auto sport about the fitment issues with the stock sway bar bushings they said they will look into it. I’ll attempt to tell DSS about it as well and maybe I’ll get it through their heads that it won’t fit 😅. Wish me luck.
As I am watching this I am listening and thinking. Wait... My speed 6 is supposed to have a boot on the driveshaft!?!?!? 🤯 Lol (Owned it for 5-6 years now)
Paint em Gloss Black or stay stock imo. Crazy build on this MSP 6. Thank you so much for info. Getting a 2012 msp 3 with 365hp and 380tq at the wheels this week! So Excited!!!!!!
Woooo 🤟🏼🤟🏼 good luck with your car !
Make sure the world knows mazdaspeed. Thank you for this 💪🏿
Thank you for watching !
Absolutely sick finally another 6 looking to join Abdul in the 10s
THESE VIDEOS MAKE ME WANT ANOTHER MS6 SO DAMN BAD !!
Lol do it!
@@SpoolingUpPerformance bruh, trust me i am lol where i live in canada (newfoundland) theres like 11 of them here maybe lol
You already know! Let’s get this tune!!
Before the video even started (thanks ads🙄) I automatically subscribed, and I don't regret it! I have a 09 Mazda 6 with a 2.5L i4, and 6 speed manual. Working on building it to what I think a 2nd gen MSP 6 would be. Love the video man!
gosh i miss mine. that boost pushed me into the seat everytime
Let’s gooooo🍺🍺 nice work dude let’s get that thing deep on the list
🤘🏼🤘🏼🤘🏼🤘🏼🤘🏼🤘🏼
Sheeesh the beast is out🦍‼️
Hell ya bro
What a monster! When that tune is cleaned up. It will be a no prep monster. Be super careful on a prepped surface when dialing that in. That is a hook machine.
I painted the rx8 wheels for my red speed 6 gunmetal and it came out great so that would be my vote for wheel color.
Love your speed6 trying to get mine to your level but wifey down shift it now got a knock but I will be hitting you up Thank you for all the videos
Email us ! SpoolingUpPerformance@gmail.com
I'm building the fastest speed6 on Guatemala, I'm missing a real mazdaspeed tuner!! Would be an honor to take Freektune's work here to Guatemala!
If you get an accessport im sure he could etune it
Let's get them likes, folks! Gen 1 Speed3 here.
Bro I have been following this build for awhile and trying to get my buddy to get his rolling, he did a 2.5 swap on his with a CST4 and that thing screams. I own a 12 speed 3 and just re-did the exhaust full 3inch and now trying to get that new tune. My next go to is new turbo but money and family is getting in the way. Really look forward to seeing more content on this beast. Love the build keep up the great work.
Thanks man and I wish you the best buddy with your car
I don’t need a tune, my 2010 Mazda 6 has 334K miles, I sure could use some more synthetic oil, though.
Great to see the 6 killing it!
400th LIKE!
Congrats, bro! She's a beast!
All I can say is wow,great build
Thanks so much
Basil tuned, running 25% e98 bnr4, ST intake manifold, full exhaust 3.5 CAI. Some weight reduction in my speed 6. Mid 13s. Love that car. Adding fuel cell and 1050cc Port injectors to run pure E at boost. Water methane. Trying to see how much HP till the motor goes. Then I'll build for HP like the one in this video. 😁
Happy to see the finished product been a long time coming.
Can't wait to see it on the track 🔥🔥🔥
She fucking flys!! Well done to all involved watched her come together for a while now 👏 .....so whens the race with abdul?👍😂😂
Thanks so much we appreciate you!
That was so freaking awesome! That thing RIPS! 🔥
Haha thanks man
This makes me so excited to get my Gen 1 back up and running waiting on cams to show up to finish the built engine finally
Heck ya!
Your vids are awesome, i just bought a 2004 mazda 6 wagon and would LOVE to build it
Spicy 🔥 I was expecting the rear end to be all over the pavement if she hooked but good driving with the clutch. Nice tip with the brake calipers! Send IT!
Thanks so much !!! Installing your hood vent in the next week ! Stay tuned. Ya the calipers are a great idea from Farhan from Damond. Ya that clutch had to be slipped hard to get it out the hole lol
@@SpoolingUpPerformance Sweet! Should be a pretty straight forward install for you. HMU for install tips
Thanks so much !
The drive shaft boot wasn't because of the bung though...they all do that. Even my wife's stock 6 ripped the secondary o2 wires off when the boot let go. Kinda scary when you don't know exactly what it is 😂
Great video yet again guys. Love seeing this.
Thanks !!!!
HECTIC!!!!!!!!
ahaha 800whp and downsizing brakes 😎 the things you do for speed
Damn let's go let's go speed 6 at this power level is sick we love the car back @ Trinidad 🇹🇹
wicked! looking forward to seeing you one the track!
Awesome dude like to hear what that set up is on that third gen camaro
One day, I'd love to get my speed 6 to this point. Currently just running CST4 @ 23lbs on 91. Fighting really bad heatsoak with CS TMIC. Need a front mount BAD. 😜
Let us know what you need!!
What kind of Temps are you seeing for boost and coolant? Just curious cause I'm still on a tmic as well but with a shitty ebay manifold but my Temps are relatively decent for where I live
@@FlyLikeRedBull It's been mid 90s here all summer and definitely doesn't help I'm at 3000ft. After 2 or 3 pulls it will climb 140-160F. Have to let her cool down before I can get on it again. Coolant temps ~190F so that's pretty normal, no issues there.
@@RogueRAZR Yeah., I have a CPE tmic and even in michigan 70s my boosted intake temp will go up to 180F after one pull (if i get stuck in any sort of stop and go traffic for a bit.) It works fine as long as the car stays moving though.
Awesome to see brother, thing freakin moves! Can’t wait for the weather to clear up so you can hit the track and get some times down! Stay blessed 👊🏼💯
Thank you so much !
Daauuumm son!!!
Hahaha that’s what I’m sayin lol
Year later lol but what’s the tire size/ setup ??
Thanks for making these videos, it's been 9 years since I had a stock 6i and getting back to my metal health with a Speed6, thanks for all the knowledge and inspiration! can't wait to turn the first wrench.
Bro a part or FreekTune, that's dope!
Full send mode🚗💥💨🔥
POW POW 💥
Hell Yeah... Now That's What I'm Talking About. 👏💯
Glad you like it !
Goals wish my speed 3 sounded this good !
Love the videos. I like that you actually show all the issues you guys run into. Love the car it’s came such a long way
Thanks ! We keep it real!
14:21 14:29 sickest launches ever
Making me miss my Speed6 so bad, Love your build man keep it up
Thanks!
Love your videos! Currently in the middle of building my speed 6 rn and it’s red also lol shooting for 650whp! Not excited about buying an x clutch twin disc though😂 it mutilating my wallet! But keep up the awesome work!
Lol thanks ! Let us know if you need anything
How Is it live with your speed6? I found one in good condition
I'm running the act xt extreme clutch 6 paddle, it's rated for over 650 ftlbs and is half the cost of a twin disc 👍 I'm sure our gears will strip before anything else at that torque
False, it not half the cost it’s only a couple hundred more for this twin disc. The only problem that we’ve experienced with those ACTs is that at a higher power level they can’t keep up with high rpm flat foot shifting they tend to start locking you out of gears when going to bang the next gear. We were missing shifts with a single disc because of that reason only. Other than that those ACTs are really good.
@@SpoolingUpPerformance yea if you live in the USA 🇺🇸 here in UK after import taxes it's less than half the price , I'm only at 450whp on stock head still at 7250rpm so guess that's why mine is coping fine, anymore I'm sure I'd be experiencing that also, every day is a school day when you own a mazda I suppose , great clean build by the way wish my was as clean 😂👍
God damn she’s nasty🔥🔥, nice build dude!
Haha thanks
Man that launch control sounds gnarly. I am waiting for my injectors to come back from being cleaned and I am so hyped
Hell ya !!!!
Love your videos! Keep it up! 💯 thanks for the awesome giveaway ideas ! 💡 hope you win and see much more content in the future !
This car looks AMAZING on FD Wheels.
I wonder if my stock FD Wheels will look good on my Speed3
They look great , rpf1s look sick on a speed3
Solid! I want that free tune for my spee6!!
Hell ya
i love these updates, im super stoked on this build ive been patiently waiting for your drag day on this new setup for awhile and want to see it soon.
Yessir!
Using WOT box? Car sounds amazing 👏
I don’t normally like silver wheels but it actually looks good with the rx rims with the fat tires
I didn’t like it at first I was like no way ! But it’s growing on me
That was awesome
I *demand* that anyone who dislikes this video *must* give a reason why! This shit is incredible!!!!
Hahaha love it!
Damn we have been waiting for this.
Knowing what you are doing with cars and being able to build something like this must be so fun to do.. Damn I'd love to be able to do things like this, and is my goal later down the road, amazing content, one of the best car channels out there, keep it up! Would love to get a tune for my beater ass gen2 speed3, i'm hopeful!
Thanks so much man ! Keep grinding towards your goals
are you going to do the brembo evo8 brake upgrade on the speed? would love to see a video on that, thats next on my list
No they’re honestly trash on the speed6 IMO. Pistons are too big in the sense of they demand too much brake fluid so the brakes fade under a lot of performance type driving
Oh man I’m up for the challenge!!! Wanna win some part(s)!! LETS GOOOOOO!!!! 😎🤜🏼🤛🏼😎 BUT really loving the Speed 6 man!! Been around since when you started to build it and the struggles you went thru but look at the beast now!! She is running and killin’ it!!!
Thanks so much for the support I appreciate it more than you know
@@SpoolingUpPerformance ayy man anything to help you out with your channel!! Just glad to be able to support you!! Been showing a lot of your videos to a lot of people so hopefully they are subscribing to your channel lol 😂
Great video
Thanks kiddo!!
Welcome
which you choice Transmission
it looks strong
or just update?
Can I ask you about the use of the gear material?
This is so epic!! Keep going 🙏🙌🏼
LETS GOOOOOOO!!!
I so wish they made the 3 in AWD. I enjoy the torque steer but pushing high hp it becomes kinda unpredictable. Have an 08 MS3 and looking for a clean MS6 for a sleeper build.
There’s guys doing it! It’s been done and I think In another year or so there will be full AWD kits for sale
Awesome!!
So she squats, I saw at wannabe tuners they put bags inside the rear coils springs 🤔 in one of their clips
We now have drag springs in the car with bc racing adjustable spring perches so she’s gunna be killer now
Oh I bet, you will put it up next video 📹 😉
Yessir
Paint them the gunmetal grey color that 2013 speed 3s came with color is clean
Hell ya
Please paint the wheels bronze. The black is cool on the evo wheels, but some pop with a secondary color would really do it justice!
Hmmm I’ll consider that !
Would love a tune I can't find any for a 04 speed6 this car is insane brother!!!! I can't follow on FB right now but when I can I will!!!! Keep going i wanna see more of this car
Free Tune for my 07 Mazdaspeed 6 from Feektune! I'm down for this I'm on a cobb tune atm so I need this!
Wooo
Godamnnnnnn
Sooo dope bro, damn I can't wait to make bigger power.. literally waiting for the big turbo to get here right now. Ups is lagging dammit haha
I could def use a tune lol let's hit the goal ppl
Haha let’s go!
Next video we gonna see the first mazdaspeed 6 wheelie lol
Hahaha
i would love that tune on my 2005 mazda speed 6 wagan s stick
Would y’all sell this? I drive a Mazda 06 Mazda 6 I dream of it being modded super dope
I love this speed 6😍🤩
Thanks ! We kinda like it too lol
Gimme that part please, my turbo just seized perfect timing.
awesome video man love how the builds coming along, id love a tune for my speed 3 just need a motor lol
how much hp/tq can these transmissions take? are they good for around 400hp at least?
Oh ya lol these transmissions have been 9s in the 1/4mile with over 800hp
@@SpoolingUpPerformance That is good to know, i have been searching for a speed 6. they are getting pretty hard to find!
She squats!!!!!
whats the part# on that boot? i need one too
keep the wheels the same 😍
🤘🏼🤘🏼
Beautiful! Makes me want to keep mine and not part it out.
Keep it ! Keep it! Keep it!
Keep it!! But if you do part it out I need a passengers side exhaust shroud 🙏🏼 lol
@@REVMedia I got a passenger side exhaust shroud!
keep those RX wheel colors stock, that seriously looks FIRE
I’m really liking them
fiat maron in matte for the wheels
Whoo hoo I have a speed 3 that needs a tune!
Let’s goooo
Hauling all the mail this time my mail won't be late😂
Spooling up mail car
Also I’d say paint the wheels a little bit darker gun metal Silver👌🏼
Thanks for the recommendation
@@SpoolingUpPerformance not a problem! I’m working my way up to your guys build, should be running here soon after 2 years. It’s going to be a really clean engine bay and car with a lot of tasteful upgrades!
That’s awesome to hear! Best of luck with it
Are you using a gen 2 valve cover with the baffling? Also, is there a kit for the venting set up that you have from the valve cover to what i assume an OCC?
I have gen 1 cover. Late night racing makes this vent kit you can check out their website
@@SpoolingUpPerformance do you have a referral code for them so that you get credit? Also, where did you have the line go to? If OCC then did you have the out flow from that go to atmosphere?
If you contact us we can get you set up with all of it ! SpoolingUpPerformance@gmail.com
Skip to 14:20 for what you actually care about.
A lot of people actually request that i keep the videos the way I make them because they appreciate the information and processes that are gone through
Yo i got a speed three would love a free tune got a cobb but i need a good tune
I enjoy and do my own tuning, but really curious where i could make improvements. Also, about to add aux fuel...
How did you learn to do your own tuning?
@@brodilla90 A combination of mazdaspeed forums and youtube. Once you do your own maf calibration and understand what is happening its not to bad. I still havent dived into VVT or VE tables.
TBH my speed6 need the chain doing now.
I need either bnrs6 or 8th port 😅 get them likes up boiss
How do we win the tune? You gonna explain next vid? I got my notifications on now
I’ll explain
Skip to 13:40! You’re welcome 😇
I was supposed to put that in a clip a few min in so people could get to the action!
@@SpoolingUpPerformance get a cage big guy. Stay safe
How much did it cost to build. And what exhaust is that?
A build like this can cost $30k+ using good quality parts
I have not seen a squat so mean since gym class "2005"
I could use a tune on my built speed 3..just sayin.👀
Awesome video! i just installed my DSS Rear axles because my OEM ones were bad. Did you have fitment problems on the driver side with stock sway bar bushings? I put my axles on last weekend and just checked the axles and the boot was blown off. the sway bar mount smacked the tightener piece off and basically cut my boot in half (Looked like your driveshaft with the grease everywhere haha) please send a brother some help! I'm hoping they sent me the wrong axle and that's why the fitment was a problem. the only thing my car has that could possibly mess with fitment (which is shouldn't) is lowered springs. if anyone has advice please LMK! if you want photos of my axle boot I'm more then willing to share. I will be in contact with EdgeAutoSports tomorrow about this sadness and it was a pain installing ;-;
Hey buddy do yourself a solid and watch this video. I explain it all. Thanks for commenting I appreciate you !
ruclips.net/video/IzOS70FaOiU/видео.html
@@SpoolingUpPerformance Wow didnt know you had a video explaining everything. Thank you! they are taking the axle back and will fix it just because only the boot is destroyed just bought myself some bushings so that this fitment issue is no longer a problem. thankfully im on stock swaybarlinks :D
Just earned yourself another subscriber :) love the information on these videos. really helping out a broke Marine here who cant be affording to not have a car HAHA!
Glad I could help!
@@SpoolingUpPerformance I took the liberty of informing edge auto sport about the fitment issues with the stock sway bar bushings they said they will look into it. I’ll attempt to tell DSS about it as well and maybe I’ll get it through their heads that it won’t fit 😅. Wish me luck.
As I am watching this I am listening and thinking. Wait... My speed 6 is supposed to have a boot on the driveshaft!?!?!? 🤯 Lol (Owned it for 5-6 years now)
It’s honestly useless
@@SpoolingUpPerformance well that's at least a relief lol 😂 Amazing launch man!!!!!
bye bye clutch
Hit the like button. 2009 mazda 6 tune please 😎
Alright. Whose the 8 haters out here that dislikes this quality content. You should go **** yourselves. 🤷♂️