3:56 they look so much better with the spoiler from a Mazda 6 luxury sports. If a mps had the same hood but the body kit that the Mazda 6 luxury sport has, it’d be perfect in my opinion
Most definitely not magnaflow for best sound. Super quiet actually. One of the most quiet from what I’ve read and you have pull out your exhaust shrouds for fitment Cpe sounds good from what I’ve seen but videos don’t do much justice. I personally have the full turbo back exhaust from Corksport(catted high flow downpipe) and I love the sound. With the resonated mid pipe there is very little to no drone at all. It has a little ‘’subie rumble’’ but a unique tone and just enough growl. I love it actually
@@cozyboy4ourtyse7en dude you should post a vid of your car so we can hear it. I would love to get an idea of what I want to do. Need more mazda 6 vids on yt. When I start working on my car, I'm gonna try to post.
If you have an Accessport you can get a tune from Freektune, Dizzy Tuning, Purple Drank, Nishan(if he isn't busy) or Edge AutoSport. When you purchase the tune they will email you asking your mods and then send you a basemap file that you will put on your Accessport and then flash that tune onto your ECU and they will tell you what to do for logging and revisions to your final map
games-r-us custom, he’s running a catless downpipe, a single round muffler (5” round magnaflow I believe, 14” body length, 3” inlet/outlet) in the mid pipe, to the tips out the rear. Not quite a straight pipe, the small muffler only silences a little, it mainly refines the tone. A true straight pipe would be raspy. I’m doing a identical setup but putting a 6” round 14” long vibrant street power muffler in, 3” inlet/outlet of course
You can do donuts, just not stationary burnouts. You could,with a lot of power, and maybe low grip tires, do a rolling burnout with a hard launch, but no the clutch dumping brake hold stuff (AWD cars in general can't do that).
My speed6 was a bastard to maintain for the short 5000 sorta trouble free miles I owned it, it was a hoot! I wanna buy a clean one and do a build on it someday:) I miss my speed6 a lot but damn it was a maintenance pig on crap that wasn’t designed right like the transmission shift fork pads being plastic🤦♂️🤦♂️🤦♂️ (caused transmission failure) It was such a pain in the ass it revoked my sanity!!!
sound like a subaru, and looks like a sleeper, love it !
MegaJaws can't beat a sleeper
1:10 yeah lemme just stick my camera out the window because wind noise isn't a thing
I read your comment before i watched the vid and OMG i don't think i have heard anything worse than that
He’s probably never been in a mildly fast car before 🤣
3:17 literally sounds like a Subaru boxer.
Thats what i love about the 2.3 L engine from Mazda
That poor Silver speed 6 that got abused and swung 🤦🏻♂️
Yea I wud NEVER. Do donuts. In my car such abuse
3:56 they look so much better with the spoiler from a Mazda 6 luxury sports. If a mps had the same hood but the body kit that the Mazda 6 luxury sport has, it’d be perfect in my opinion
The white Mazda hitting anti lag is a 6s not a MS6. I think it’s called the wicked six or something. It’s a twin turbo 3.0 v6
Sick ! Love the ms6
thanks
guys like the fourth one shouldn't be driving this car...
3:35 where did you find this ? Like does he have Instagram or RUclips?
Any guesses on the intake exhaust set up at 2:40?
that’s what i wanna know lol sounds so good
1:30 when you are scared to push it but do it any way
Those Polish guys blew an O with their mazda
Used to work at Mazda as a lot tech back when these were new, absolutely loved taking them out and thrashing on em
I don't know where you worked but I'm pretty sure you thrashed on my speed6 too
Moua Xiong 😂😂😂
Anyone knows where I could get a catback full exhaust. Good quality don't mind spending a grand or a little more on it?
Cork sport turbo back exhaust
CPE everything is the way to go
Magnaflow for best sound
Most definitely not magnaflow for best sound. Super quiet actually. One of the most quiet from what I’ve read and you have pull out your exhaust shrouds for fitment Cpe sounds good from what I’ve seen but videos don’t do much justice. I personally have the full turbo back exhaust from Corksport(catted high flow downpipe) and I love the sound. With the resonated mid pipe there is very little to no drone at all. It has a little ‘’subie rumble’’ but a unique tone and just enough growl. I love it actually
@@cozyboy4ourtyse7en dude you should post a vid of your car so we can hear it. I would love to get an idea of what I want to do. Need more mazda 6 vids on yt. When I start working on my car, I'm gonna try to post.
In Finland i have seen 2 Mazdaspeed 6 and three Mazdaspeed 3
santtu Pelaa thank u santu, very cool
What rims are on the car on the red speed 6 before u click on the vid?
Xxr 527
🔥🔥🔥dang bad ass 3:48🔥🔥🔥
Where can i get my mazda 6 tuned on fl
If you have an Accessport you can get a tune from Freektune, Dizzy Tuning, Purple Drank, Nishan(if he isn't busy) or Edge AutoSport. When you purchase the tune they will email you asking your mods and then send you a basemap file that you will put on your Accessport and then flash that tune onto your ECU and they will tell you what to do for logging and revisions to your final map
What exhaust does the one at 3:05 have??
Sounds like straight pipe
games-r-us custom, he’s running a catless downpipe, a single round muffler (5” round magnaflow I believe, 14” body length, 3” inlet/outlet) in the mid pipe, to the tips out the rear. Not quite a straight pipe, the small muffler only silences a little, it mainly refines the tone. A true straight pipe would be raspy. I’m doing a identical setup but putting a 6” round 14” long vibrant street power muffler in, 3” inlet/outlet of course
@@sleeper.simulant7327 does he have an insta, would love to see more of the car
Bloop Lawless not that I know of
mazda 6 brunout completions
I love my Mazda 6
How would they do burnouts if the mazdaspeed6 is awd
destroying clutch and diff mounts
You can do donuts, just not stationary burnouts. You could,with a lot of power, and maybe low grip tires, do a rolling burnout with a hard launch, but no the clutch dumping brake hold stuff (AWD cars in general can't do that).
It's not good 4 the car.
You can but you shouldn't, same with any add car it hurts it badly.
Its awd but fwd dominant. More power to the front wheels
I got a speed6! it’s fun but swallows gas :d
bruh me too, this oil crisis is so rough on the bank rn 😅
@250 where do I find his vids
Kavan Little who's videos
His channel name is "killerdragn" good videos but he really just plays pubg now
I never seen any in my country
They are rare
Mazda speed 3 gen 1 is very rare, gen 2 are rare and the speed 6 are super rare
There’s heaps of them in nz
My speed6 was a bastard to maintain for the short 5000 sorta trouble free miles I owned it, it was a hoot! I wanna buy a clean one and do a build on it someday:) I miss my speed6 a lot but damn it was a maintenance pig on crap that wasn’t designed right like the transmission shift fork pads being plastic🤦♂️🤦♂️🤦♂️ (caused transmission failure) It was such a pain in the ass it revoked my sanity!!!
Sounds just like a flat 4
What da hp
260
3:47😍😍
looks wack as fuck
@@koziolkuba lmao nah his kit looks really good, punisher 6 is the only twin turbo v6 mazda6 in the world lmao
i like mazda3 mps
Patrz!!!🇵🇱
Widziałam. 🇵🇱