Xiaomi Roborock | LDS Sensor Error 1 | LDS Motor Repair - TOTAL TECH
HTML-код
- Опубликовано: 15 окт 2024
- Fixing LDS Error 1: Need a screwdriver and a USB cable.
Steps for solution with video timeline:
01:05 - Disassemble Roborock S50 upper lid and remove the screws where you will find LDS motor
01:04 - Then remove it carefully from Xiaomi Robo Vacuum Cleaner
02:33 - Cut the USB cable towards the connection end and will find 4 coloured wires
03:14 - Join the black and red coloured wires of LDS motor with same coloured wires of USB
03:40 - Connect the USB to a USB port (laptop OR power bank)
04:00 - LDS should start rotating and keep it in rotation for 20 -30 secs
Steps for testing with video timeline:
04:42 - Testing Xiaomi Robo Vacuum Cleaner after placing LDS sensor back
05:30 - Testing after reassembling Roborock S50
07:12 - Performing auto charging operation on Xiaomi Robo Vacuum Cleaner
That's it! You are good to go, Roborock LDS Error fixed
I have tried many ways but found out this is the best possible way to fix Xiaomi Roborock sensor. Have browsed many videos online but could not find a solution to this problem. I was about to order a new spare sensor online and it was then I just wanted to give it last try.
And this fix worked like a charm without a doubt as you can see in the video here.
I would recommend this solution for getting your Xiaomi Roborock sensor fixed. Just try this solution before you make other choices.
Request you to like and subscribe my channel. I will start uploading further videos on how Xiaomi Roborock S50 is working and if there are any other issues with it.
#totaltechallaboutgadgetsandtechnology, #XiaomiRoborockS50, #XiaomiLDSReplacement, #XiaomiRoborockSensor,
#XiaomiLDSReplacement, #XiaomiLaserDistanceSensorMalfunction
Roborock S5 parts (brushes, filters, mop pads) on Amazon:
amzn.to/2GwSZnl
Offical Roborock Tutorials and Manual Download:
en.roborock.co...
Here are some solution videos of other youtube channels:
Xiaomi roborock robot vacuum cleaner 2 error1 code LDS sensor motor repair
Channel: 최기사
Channel link: / @최기사-b8x
Video link: • Xiaomi roborock robot ...
Xiaomi Roborock S50 v2 Repair error 1
Channel: nicobou01
Channel link: / @nicobou01
Video link: • Xiaomi Roborock S50 V2...
Xiaomi Vacuum Roborock s50 - Error 1 Fix - LDS not working
Channel: Fábio Caldas
Channel link: / fábio caldas
Video link: • Xiaomi Roborock S50 V2...
Roborock S5 (S50) Compete Setup Guide! - , ALL Buttons & Features, Maintenance
Channel: Vacuum Wars
Channel link: / @vacuumwars
Video link: • Roborock S5 (S50) Comp...
Thank you. Thanks to you I was able to fix my Roborock 5.
Thank you so much! Ive seen other videos like this one but did not understand how to connect the wires plus the videos were a bit too speedy for me, a woman who has no idea of wires. But you talked slowly and showed everything i managed to start my vacuum. Thank you million!
Thank you for this very useful video. I'm a non-technical person and have managed to follow the steps and to get my Roborock working. Thank you very much!
Glad it helped
Excellent fix, you are a star. (Small advice: bin the back ground music, makes it very hard to hear your voice)
You are amazing. After I contacted the company. They recommend me to change the laser part. I almost spend $100 to buy a new laser part if I had not found your video. Thank you so much.
Glad I could help! Request to subscribe and share.
Great tip! Worked for my Roborock and I resurrected it from the dead. Thanks a lot for this video!
Спасибо мужик, ты спас моего Альфреда и меня от потери 100$ (столько хотят за ремонт).
Thanks man, you saved my Alfred and me from losing $100 (only want for repairs)
Thanks man, you saved me a lot of trouble!!! I was freaking out how this thing just died on me and then I tried jumpstarting it and it works now! Amazing!
It worked for a while, and in the middle of the next cleaning it stopped again. What should I do?
just tested this method like shown on the movie and result was after the minute! so this is really cool. Saved time and money !!!
This really worked. Thank you so much. (Roborock S55)
Kudos, it did the trick. I also added a drop of machine oil to the axle before applying the voltage - I guess the engine must be stuck due to the old lubrication wearing out.
Worked, thank you! Wish there was no background music on highly technical videos like this.
Not all heroes wear capes. Thank you!
Glad it helped!
What is the explanation for this fix? Just connect new cables and it start working? I don't get it
Worked for mine too, running 3 days in a row so far. Thank you very much! =)
Thanx a lot, I also had the same problem, and fixed using your instructions!
Fricking works! Thanks man!
Works! Thanks a lot)
It really worked, easy fix. Thanks very much
Working for me. Just clean the durst around the motor and give a little bost with a old usb cable on computer. And the motor will restore the rotating.
It actually worked! Do you think this is a permanent fix?
thanks for the tip, you saved me a lot of money!
Glad i could help! Request to subscribe
That orange rubber piece that spins the sensor has become dislodged in my robot and it’s stuck in the 3 white pieces at the top of the sensor how do I put this back in place so the sensor will spin again?
Сработало, спасибо!!
Wow. It just works.
Thanks! worked fine!
It worked for me with a faster solution.
Just disconnect the red/black cable; start roborock with this setting; Connect the red/black cable; start roborock again and it worked :)
But thanks :P
Great tip!
Worked for me! Thank you!
Thanks a lot, saved my life!!! :-) 💕
Thank you very much it worked
Thank you!
Thanks bro!
Worked for me!
But only for 5 minutes
Well, it worked for 5 minutes and stopped again. I wonder what is the root of this issue.
Same here! Did you found out what was going on?
It's working fine for me since I repaired it. Just try and do the same once again and keep the LDS motor running for about a minute before you fix back in roborock.
@@MrFredi_ yes, I did it few times, every time increasing the the amount of time running from the USB, but it stooped anyway. What I did then, took the engine apart as much as possible and cleaned the metal rod that comes from the actual engine and used a drop of good oil (for my WAHL hair cutter) on it and ran again from usb for about the minute. Since then (touch the wood) it is running fine.
same me. work for 15-20 mins, and show erro 1 again, how to fix it?
Leider wird nicht erklärt, wie die Abdeckungen demontiert werden. Für mich deshalb nicht hilfreich
It doesnt do the job for long and as you can see the vacumm bumps into obstacles. With working laser it doesnt do that.
Try this repair process again and order LDS motor if it doesn't work after the repair. But it should work ideally.