Xiaomi Roborock S50 | LDS Error 1 | LDS Stopped Working | LDS Error Fixed - TOTAL TECH
HTML-код
- Опубликовано: 16 авг 2019
- Fix for LDS Error 1, when LDS stopped working: Need a screwdriver and a USB cable.
Steps for solution with video timeline:
01:05 - Disassemble Roborock S50 upper lid and remove the screws where you will find LDS motor
01:04 - Then remove it carefully from Xiaomi Robo Vacuum Cleaner
02:33 - Cut the USB cable towards the connection end and will find 4 coloured wires
03:14 - Join the black and red coloured wires of LDS motor with same coloured wires of USB
03:40 - Connect the USB to a USB port (laptop OR power bank)
04:00 - LDS should start rotating and keep it in rotation for 20 -30 secs
Steps for testing with video timeline:
04:42 - Testing Xiaomi Robo Vacuum Cleaner after placing LDS sensor back
05:30 - Testing after reassembling Roborock S50
07:12 - Performing auto charging operation on Xiaomi Robo Vacuum Cleaner
- That's it! You are good to go, Roborock LDS Error fixed
I have tried many ways to find Xiaomi robot vacuum troubleshooting, but found out this is the best possible way to fix Xiaomi Roborock sensor problem. Have browsed many videos online but could not find a solution to Xiaomi laser distance sensor malfunction. I was about to order a new LDS sensor spare part for S50 Roborock online and it was then, I just wanted to give it a last try.
And this worked like a charm without a doubt as you can see in the video here, about the LDS error fix.
I would recommend this solution for getting your Xiaomi Roborock sensor fixed. Just try this solution before you make other choices like Xiaomi LDS replacement, which is expensive.
Request you to like and subscribe my channel. I will start uploading further videos on how Xiaomi Roborock S50 is working and if there are any other issues with it.
#totaltechallaboutgadgetsandtechnology, #XiaomiRoborockS50, #XiaomiLDSReplacement, #XiaomiRoborockSensor,
#XiaomiLDSReplacement, #XiaomiLaserDistanceSensorMalfunction
For better audio quality, see the video below:
• Xiaomi Roborock | LDS ...
Roborock S5 parts (brushes, filters, mop pads) on Amazon:
amzn.to/2GwSZnl
Offical Roborock Tutorials and Manual Download:
en.roborock.com/pages/support...
Here are some solution videos of other youtube channels:
Xiaomi roborock robot vacuum cleaner 2 error1 code LDS sensor motor repair
Channel: 최기사
Channel link: / @user-dt2kx9xe2l
Video link: • Xiaomi roborock robot ...
Xiaomi Roborock S50 v2 Repair error 1
Channel: nicobou01
Channel link: / @nicobou01
Video link: • Xiaomi Roborock S50 V2...
Xiaomi Vacuum Roborock s50 - Error 1 Fix - LDS not working
Channel: Fábio Caldas
Channel link: / fábio caldas
Video link: • Xiaomi Roborock S50 V2...
Roborock S5 (S50) Compete Setup Guide! - , ALL Buttons & Features, Maintenance
Channel: Vacuum Wars
Channel link: / @vacuumwars
Video link: • Roborock S5 (S50) Comp... Наука
Our roborock suddenly stopped working and I started googling the solution to the problem.. However, videos in Russian (I am from Russia) suggested replacing the LDS - as if it was the only way out and nothing else could help. But your video is pure magic!!!!!! I did everything according to the instruction and the cleaner came back to life!!! I can't believe it's so simple. Thanks so much!!!
You just saved me from an unnecessary headache. Big thanks!
Worked on a Xiaomi Vacuum! You saved me some money for sure! Thanx!
I bought a micro usb cable for just 1€ and it worked! Thank you so much!
Amazing! This worked like a charm. I first used lightning USB cable but it did not work but when I used micro USB cable it worked. Your video helped a lot! Thanks!
This solution will help the roborock LDS sensor to run with no issues. So, you can safely use this solution to fix roborock lds error 1. Please hit SUBSCRIBE, LIKE 👍 and SHARE, if this video helps you in anyway
Legend! Worked a treat. Thanks from Australia mate!
Thanks for your comments. I do not want the world to face the trouble I faced.
awesome, thank you so much.. didn't even take 5 mins to do this!!!
Wow this really works! Thank you!
Thank you, your method works! Help to "revive" my roborock! 😄
Worked on my Roborock S55! I used an old micro USB cable and worked at the first attempt! Thanks!
Thank you for sharing! It worked on the first attempt. People... to disassemble Roborock S50 upper lid, you have to force a little bit (pull up the fixed lid part). Don't be afraid...you (probably) won't broke it :-D (May I suggest that you lower the volume of the music? It cover your voice sometimes) 👌
Will keep your suggestions in mind for my next video. Good to hear it's working for you
Worked the first time I tried, amazing solution!
Thank you this indeed solved the issue without replacing the whole LDS unit!
Hi
This approach worked perfectly for my Roboroc. Video was clear, concise and to the point and saved me money and time. Thank you!!
Thanks for your comments. Good to hear 👍 Please SUBSCRIBE that will motivate me
You rock buddy, thank you from France
Worked perfectly fine! Thank you very much :)
Wow, looks like a lot of people have experienced this problem. About to take mine apart, hope it works!
This worked great for me too! Appreciate you sharing this fix. Thank you! :)
Thank you ! U save my nerves . Good work !
Thanks for this, it actually worked. You saved me from having to sweep up my floor manually :D
Glad I could help!
you are a genius man, you deserve every like you get
Thank you for this video. This worked exactly as described. You saved me $75.
Funcionou!!! Incrível!!!
Muito obrigado!!!
I'm from Brazil
👍👍👍
Boa sorte! Desfrute de limpeza
Works perfect! Thanks 🙏🏻
Thank you very much! Saved me 70 Dollars. Great job !
I'm glad I could help. Request to subscribe
It works! Perfect, thanks a lot. You make my day.
My unit's laser sensor was not moving and this fixed the problem perfectly! Thanks.
Thank you sir!! Worked like a charm!
Wow! It worked in first attempt. Thanks for sharing.
At first I thought it was a good joke. But it worked for me! Thank you. Now, when you are limited in access to spares and support it is even more value. 👍🚀
Happy cleaning Dimitri. Will be coming up shortly with a video on "Is it safe to order spares in these tough times?". Stay tuned...
Worked for me too. Thanks a lot.
great video. Helped with my problem a lot 👍
Perfect! Thanks a lot.....👍🏻😁😊
Thanks its really works!
thanks man. your method is working on my issue. During start up my sensor motor turn a little while then stop, I was curious whether the motor spoil or what till found your video! thumbs up for the test.
It works, thank you so much.
Danke hat wirklich funktioniert. Schon seltsam das Problem. Aber solange man sich damit Abhilfe beschaffen kann. Danke.
Thank you very much. Easy to implement, detailed solution. Hope it will work for some time, in that time Will order new motor from Aliexpress, it is around 5$
Do you have a link please
It works!!! Thank you very much!
Thanks a lot !!!! My Roborock works!
That did the trick. I bought a new motor from AliExpress then after an hour watched your video :D.
Worked like a charm!
Thank you very much! Worked perfectly fine.
Glad it helped
Thanks from Switzerland, worked for me! I just was able to let it turn like half a second because the battery I had was almost empty
Glad it helped!
Thankyou for posting this video, very helpful. The stripped usb cable to laptop was an easy way to charge the motor. The vacuum is cleaning the house now. I'll update if it stops working again in the next few weeks. Fingers crossed its all good...
It lasted about a week before stopped again. I used the same repair a few more times while waiting for a new motor in the post. Now replaced motor and it's not had any more problems. Helpful video but for me a temporary fix.
@@kieranv I have the same problem. Where did you bought the new motor?
Thanks
Thanks a lot. Very helpful, indeed. Great job
Also with a micro usb
It really worked! I am so happy!
Thanks a lot!
Excellent video - and it worked for me - I don't know why running the motor for 30 seconds cured the problem, but it did!
Worked amazingly!!!!
Request to SUBSCRIBE
Thanks so much for your solution ❤
excellent, mind blowing
Thanks Laxman
Great!thanks a lot!
Awesome. It does work. I tried removing and putting back the sensor head multiple times and after every time, it did work, for about 5 minutes, then again it stoped working. Then I tried THIS IN THE VIDEO, and IT WORKED !!!!!
Thank you for your time
It worked! Thanks
Thanks, worked for me!
Thank you very much. I succeeded. It worked.🤗 I did exactly as it is in the video.
Thank you so much!
Thanks man! You saved me
Thanks man, this really does work......... I have no idea why, but it does. Soldered 2 wires to the motor, and first tried hooking it to an USB power adapter as I didn't want to risk a PC/Laptop, however although the motor worked - it did not work when I put it back in the unit. Then I hooked it to the front USB on my PC, and after another test - it worked inside the roborock unit as well. Damn.
It works ! Thank you
Fiz exatamente isso e meu Roborock S50 voltou a funcionar perfeitamente, thank you!
Thanks
Works!!
This works! Wow. Great
Segui o passo a passo e deu certo. Muito obrigado ❤
Super vielen vielen dank thenk you
Obrigada, funcionou perfeitamente!
thank you . you save me. thank you very much. it worked. i did it with usb. thanks again
it worked! thanks
*Difficulty 2/10*: Worked exactly as described, w/ older mini usb, red & black cables only. Tried to plugin to wall via adaptor and didn't work. After reattaching the wires, plugged to laptop, it worked! *ANYONE* with a small phone / laptop repair kit can do this. Tip: strip quite a bit of of the red / black insulation casing from the cables, so you've got plenty of slack.
The only thing that has happened out of the ordinary, just prior to this LDS error 1, is that when the vac didn't get placed on the charger properly and caused the battery to totally drain. Even though, I recharged before using, seems something changed. How's that for anecdotal? Thank you very much taking the time to show us how to fix, saving us a lot of money. Cheers!
Thank you for the comments
merci beaucoup , super tuto et ça marche
est ce que vous avez eu de nouveau le pb? car moi oui après 10 min
Thank you
Obrigada. Funcionou 😁
thank you for the best video! when i remove the motor from the roborock . i see a lot of hair stuck under the rubber, when i clean all of this, the roborock back to work again,
Works like a charm
Thanks :)
Great it worked
Well I just turned the laser 4 or 6 times, put the roborock in an another place and it works again. Thanks for the tips
Lol, it worked. Thanks man 😂
Can’t believe it actually worked!
Thanks it worked
If you had only had the cleaner 3 months before it gave you trouble , were you not covered by manufacturers warranty ?
In fact yes, it was under warranty then. But the problem is that I ordered it from Gearbest in UK and got it shipped from China to an US address and had it delivered to India. So, for all the practical reasons that I cannot ship it back to UK or China and there is no service available in India, I had no choice but to look out for such an alternative.
Thank you so much it worked. If this happens again would you buy a new motor or laser? Thank you for your help.
The laser, thought a little high in price compared to motor. Bcoz LDS motor is not working all ways as Serene Teng commented above and I heard from few others. But you can still try.
Thank you so much the solution worked for my roborock S5 error 1. However, before and after error 1, I was and am getting error 8 (remove obstacles). I think there is some problem with right wall sensor as it get stuck very often at right side
i just fixed mine with this solution! The hardest part was stripping wire of the USB cord. Otherwise, the rest was a breeze!
Had the same issue and if by doing this it doesn't work you need to replace the little motor. Worked for mine
#🙏SUBSCRIBE/LIKE/SHARE🙏#
I hope people who are seeing this video are finding it helpful. I'm glad I could help. But a small request to SUBSCRIBE to my channel that will motivate me to do more videos 🙏🙏🙏
I fixed mine the other day with a 9v battery to jump start the motor, works fine now (also cleaned the spindles etc).
Thanks a lot, you saved my vacuum!;) does this error come back for everyone, or has some1 managed to perma fix it like this?
For me is comeback. I do this. Clean a house. And next time is always stop
@@swieca244 I guess I was lucky, 6 months and it still works :)
It came back multiple times for me and finally I replaced the motor on it and it fixed the issue. www.amazon.com/fayle-Roborock-Cleaner-Pulley-Distance/dp/B0854CRGQD/ref=mp_s_a_1_4?dchild=1&keywords=roborock+s5+replacement+motor&qid=1609524372&sr=8-4
I need a guidance how to change the laser of roborock S5 Max, do u have any experience ? I need that urgent, tx in adv
Sorry for the late response and wish you found out the solution. But have you looked at this video on repairing LDS Error 1? Changing laser of Roborock S5 is similar to this.
Dostum harikasın, yöntem işe yarıyor. Yalnız uzun vadede sıkıntı tekrar ediyor sanki. 3 ay önce Error 1 ile karşılaşıp videodaki yöntem ile, USB ile elektriğe bağlayıp sorunu çözmüştüm, ama şimdi aynı hatayı tekrar alıyorum. Kesin çözüm motorun değişmesi mi acaba?
Hi, i do that proceedement but after 15min of cleaning the error 1 appears. How many minutes i have to put the 9v batery on the sensor?
M cũng bị vậy, cuối cùng thay motor có hết ko b, đang đặt moto về
Hello! If my motor/laser sensor is already spinning, but still says Error 1, do i still need to jump start the motor?
hello, i tried this and it worked but after using vaccum.for 5-6 times the error came back. is it normal..do i need to do tjis everytime.
Need to replace the motor. Had the same issue and it fixed it. www.amazon.com/fayle-Roborock-Cleaner-Pulley-Distance/dp/B0854CRGQD/ref=mp_s_a_1_4?dchild=1&keywords=roborock+s5+replacement+motor&qid=1609524372&sr=8-4
If the motor does not run even though powerbank is providing the power - motor is completely dead right? Can i just buy any similar sized 5v motor and replace it?
It did not last for me. I fixed it eventually, by drop a few drops of oil on the brass bearing of LSD driving motor. I tried to restart it by driving it with 6V dc supply, but it only worked for a few minutes. After adding oil, it worked for 4 hours already and a new motor is on the way.
Thank you for the solution, it works great!!!👍 However, this works one time, if I want to turn it and have it to clean the house after 2 days, I am gettinf again fhe error and I need tk repeat the process. Is there a permanent way to fix it? Thanks
I have the same thing. To contact customer support its impossible. I think you need to buy a new LDS on there website.
The same. Maybe you tix it? Enough a motor lsd or new lsd?
@@swieca244 In the end I have ordered this one from Aliexpress, replaced it and its working again✌️ - Gear Transmission Motor for XIAOMI 1st mijia 2st Roborock S50 S51 S55 Robot Vacuum cleaner Spare Parts Laser Distance Sensor LDS
Had the same issue and bought a new motor and it worked. www.amazon.com/fayle-Roborock-Cleaner-Pulley-Distance/dp/B0854CRGQD/ref=mp_s_a_1_4?dchild=1&keywords=roborock+s5+replacement+motor&qid=1609524372&sr=8-4
Hi my roborock s5 max have the same problem. However the lidar is spinning. I tried your tips but it doesnt work. Can you help me. Thanks
It actually worked! Is it programmed to fail after a certain time and this resets it? planned obsolescence?
Thanks for your comment. Obsolescence is inevitable with every electronic product, just that we are not sure when. People would not choose to upgrade/buy if the same product/spares works forever and thats how they run their businesses, I believe.
It worked for me, but the only problem is how long will it work for before it stops spinning again.
It will not working again :(
It's been working all this time for me. To be frank it stopped once and never again.