Nissan Navara D40 YD25 Cylinder Head Replacement
HTML-код
- Опубликовано: 27 май 2020
- #Nissan #Navara #D40 #HeadGasket #Cylinder #HeadReplace
Hello and welcome to our Channel, in this video you would know all following
Nissan Navara D40 Head gasket replacement
Nissan YD25 cylinder head torque settings
How to Torque and Angle Nissan YD25 Cylinder Head
Nissan Navara D40 YD25 cylinder head replacement
Main bearing torque settings. Авто/Мото
nice video bro D40 navara👍
❤️❤️❤️❤️
👍👍👍👍👍👍
Hello! Thanks for the video. may i ask if a cracked cylinder head can be welded ? My D40 head has 2 cracks in the water jacket. Thank you.
It can be done ✅ but not highly recommended to do so as specially Navara heads are so delicate… if you do so so many precautionary care to be taken
hi, how do i find TDC for alligning camshaft and camshaft chain? thanks always
Well, it’s to follow the timing point given on the chains and sprockets (I’ve done a different video of the same )
hi do I need new head bolts for head gasket replacement?? or use it again?? thanks!?
Nope, you can use the existing bolts
What’s the process for retorque after 1000km?
Can I use torque only or it needs to be angular?
Its the process to fist check whether any changes of the valve clearance, then check the last step of the torque settings
Hai
Hi, head and head gasket have been previously changed a couple years ago but gasket has blown again... why is this?
I'd there a permanent fix for this problem or do they keep blowing?
Hi, well there will be an issue to blown the head gasket.. please have the following check
* using the correct radiator cap
-* using the correct reservoir tank cap
* if the water fan replaced along with the head gasket replaced?
Are you using the torque settings to tighten the gasket?
Magkano pOH nmn Ang assembly price Ng cylinder head niyo boss
YD25 nissan uvan torque number
Saludos una pregunta puse a tiempo mi motor 2.5 nissan y sólo me gira el sigueñal un cuarto de Vuelta en que ando mal ?
sorry to be offtopic but does anybody know a way to log back into an Instagram account??
I somehow lost the login password. I would appreciate any assistance you can give me!
@Giovanni Huxley Instablaster :)
@Gary Camden Thanks so much for your reply. I found the site on google and I'm trying it out now.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Gary Camden it worked and I finally got access to my account again. I am so happy:D
Thanks so much you saved my account :D
@Giovanni Huxley Glad I could help xD
Hi,can boring navara oversize
Best is to install new sleeves and use standard size piston
Hy do I need to change the head cylinder bolts after I removed the cylinder head ?
No dear, your not supposed to changed unless broken or something
@@abcautotrendy Some engine its strech bolts and they need to be replaced everytime you undo them. But the YD25 dont have them ?
@negueba235689 its depends, you need to inspect the thread on both the bolt and the head before tightening them | so better to use the correct torque wrench with correct settings. In case if the thread has been damaged you may need to insert either helicoil or customize helicoil
Is this same for zd30 patrol too
6 cylinders pattern is the same as everything
Hola cuanto de torque amigo
I think I have already posted but let me mention it again.
1. Tighten to 29 - 30 N.m
2. Loosen completely to 0 N.m
3.Tighten to 19-20 N.m
4.Tighten to 120 to 125 Degree by using angular tightening.
Creo que ya publiqué, pero déjame mencionarlo nuevamente.
1. Apriete a 29 - 30 N.m
2. Afloje completamente a 0 N.m
3.Apriete a 19-20 N.m
4. Apriete de 120 a 125 grados mediante apriete angular.
Good day. What is the wrench and its size used in removing cylinder head bolts? Thanks
12mm RIBE SOCKET
@@abcautotrendy Thank you. Your video is of great help as I will be replacing the head gasket of my D40 so i can prepare a tools for opening the cylinder head. More power to you!
@@abcautotrendy Is it ribe socket or ribe socket bit?
Thank you and please ping me for anything
Better you buy a rib socket bit
Hi , i have nissan navara d40 2.5dci , i had problems with warming engine temperature, , i sent the car to the mechanic, hi said it must sanding the engine head motor , but if you want garantie , you must be sanding the engine block too and pistons too , is this correct?
That is absolutely correct dear
@@abcautotrendy thank you very much ✋🏻
Your most welcome dear
@@abcautotrendy one last question please , if we surface engine head , engine block and pistons , will engine work good, without any ticking or something ?
Well, there is a maximum limits to surface engine head and the block..so you have to inform the lathe workshop technician to be causation about that…
They only can let you know whether the head needs to surface and valve (intake and exhaust) needs to be replaced, valve guides needs to be replaced along with the valve sheets
With regards to the engine block… they will update you whether piston needs to be replaced and if so the bore also needs to replace with sleeves..
If there is displacement in the piston bore, the stroke ratio differ so in that case it’s a mandatory replacement
Bos enjin yd25 sama ke dgn enjin d40
Yes dear
How much it will cost for this repair ?
Like? Are you looking for a complete overhaul or partial head gasket replace
@@abcautotrendy partial head gasket replacement but let me have a roughly figure for overhaul also
It depends with Japanese and a Nissan Genuine Spareparts : kindly drop a message in WhatsApp with vehicle number and your identity to obtain a quote
@@abcautotrendy ok, sure.
YD25 torque number
Tighten bolts from inside to outside order.
a. Apply engine oil to bolt threads and seat surfaces.
b. Tighten all bolts to 39.2 Nm
c. Tighten 180 degrees (angle tightening).
d. Loosen completely to 0 Nm.
e. Tighten all bolts to 39.2 Nm
f. Tighten 90 degrees (angle tightening).
g. Tighten another 90 degrees (angular tightening).