7.3 POWERSTROKE QUICK TECH TALK LPOP AND HARMONIC BALANCER OR FLUID DAMPER
HTML-код
- Опубликовано: 13 сен 2024
- 7.3 PSD'S ARE 20 30 YEARS OLD THE LPOP AND HARMONIC BALANCER SHOULD BE REPLACED GET A NEW ONE SAVE YOUR SELF HEAD ACHES
#fluiddamper
#harmonicbalancer
#lpop
#7.3psd
#7.3
#powerstroke
#customworks
#customworks
#ECT
#sensor
#temperature
#7.3powerstroke
#oilleak
#powerstroke
#valleyoilleak
#sensor
#whitesmoke
#idle
#losspower
#vgg
#scotty
Copyright Disclaimer. Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.All info presented is for humor no real effort went into actually checking correct or facts .
Ok fine.
Will add it to my ever growing list thanks to you.
😂 thank you sir
Exactly what I was wondering about. Mine needs replacement. Great video, thank you.
That little extra umph of vibration puts my 1 year old daughter right to sleep😅
Dude we all have memories of falling asleep to the sound of the 7.3L ... My grandpa had one...
Great information, thank you
Many thanks for your advice on the 7.3
I'm ready to watch your start to finish video set for rebuilding a 7.3 properly. I'm thinking about doing my first this Winter and have only rebuilt a couple gas Pontiac 400 engines before.
Great video thanks for the info
I bought the Melling M208, just shy of $200... The HV is a little too rich for my pocket book at the moment
Great advice, never thought of the harmonic balancer. I will now
2001 F-650 W/ 42' toy hauler
Thx
just failed inspection due to the damper coming apart. I happen to have an ATI sitting here from a project truck so it is going on the work truck. you are making me wonder if I should slap on a pump while I am there
Yes please do at least a new melling if you can swing it get a high flow
@@CUSTOMWORKS7.3PSD I have a factory ford one from the rebuild kit, once the damper is off it looks to be no real extra effort to replace... ok you convinced me
Good morning friend, yes, a follower of your page, I have a 7:3 e35e350, I changed the low pressure oil pump but the oil does not go up
I understand the higher volume lpop benefits but I wonder about who Dieselsite is having make the gerotor set. Those have to be very quality parts to last and I’m a little hesitant on this one.
my truck has been sitting at a shop for over a month and a half just for up pipes and turbo install!
Do you sell rebuild 7.3 with all the modes you talk about if so I'm very interested I could drive the truck there swap motor and drive it back after I get the new one installed and paid for.
Just installed the m208, coated the gears with engine oil per the manual. Didn’t use any Vaseline or grease. Also replaced timing cover (ford, not Dorman), oil cooler gaskets, moroso oil pan gasket, new oil pan while engine was jacked up. Anyway got it back together , filled hpop reservoir to the brim and cranking but no start. My guess is either low pressure oil pump not priming, or cps not reading properly?My thoughts are to remove the 3/8 hex plug / spring / ball “short circuit device” to add oil, this would replenish oil cooler and get some oil into lpop. Would this help it start? Or is there a better way to prime? I didn’t add oil to filter or oil cooler before installing, Would love to avoid removing harmonic balancer again
Yes filling up the pump through that ball springy would do the trick But if the hpop reserve was full it should have ran till the tank went empty so keep that in mind ? oil pick up gasket seal loose or spun hpop bolt
Just put a new melling 208 lpop and oem ford balancer on my 300k mile excursion. All I can say is wow what a difference.
Truck starts way faster, and idles so much smoother.
Ford diesel tech here
Make sure when re installing the harmonic balancer to add a dollop of rite stuff gasket maker in the keyway of the balancer to prevent oil leaks. Yes they will leak if you do not.
Oreillys rents the harmoic balancer puller and installer
@@007.3lI’m reinstalling mine today do I need the installer tool or can I just tighten the bolt and so just put a dab of right stuff gasket maker in the key way slot ?
Does the Fluidamper require the addition of a wear sleeve to seal correctly to the front seal of the dieselsite high volume low pressure pump? I just did this install of these two parts and the front seal leaks on start up. Help! I dont understand what could be wrong.
Occasionally even with a regular HB I will get a leak after installing another it stops And to answer no I install both together never had to install a sleeve You will need to find if its the LPOP seal that's defunk or a bad Damper that's over cut
Nice !!!!! 😁
600 bucks for me never to think about it again and get extra performance sounds like a steel
and is a steal
Am a big fan of both of these
Ok so how do u change the lpop please make that video for us 7.3 crazed gentlemen I have a 96 f350 the truck is held together with bubblegum and string but ya just can’t kill the mighty 7.3 she needs all of these wonderful things done to her it’s the fn money I don’t have 🥲to do it