HP Pavilion Gaming PC Case Swap TG01-0023W
HTML-код
- Опубликовано: 21 авг 2024
- In this video, we get rid of the old case and upgrade to a new one! All of this is done on an HP Pavilion Gaming PC model TG1-0023W. If you have any questions, comment below. Enjoy the video!
Items used in video
- Thermaltake UX100 - amzn.to/3pGigkX (affiliate link)
- Asrock B450M Pro 4 - amzn.to/3zfLPwZ (affiliate link)
- EVGA Supernova 750 B2 - amzn.to/3mLFJQa (affiliate link)
- Antec NX410 - amzn.to/3mOLNqT (affiliate link)
- Coolermaster Thermal Compound Kit - amzn.to/31eHMVf (affiliate link)
- Kaisi 126 in 1 Precision Screwdriver Set - amzn.to/3sRmlF0 (affiliate link)
- Corsair Vengeance LPX Ram - amzn.to/34n3cRp (affiliate link)
DISCLAIMER: All Amazon links are connected to my Amazon Associate account. We may earn a small commission from each purchase with no additional cost to you.
love the dog stealing the screwdriver ! great vid 😂
Thanks haha I honestly didn’t even realize until I needed it again. He chewed the end completely up
😊
I have a pc just like the one you case swapped and I was wanting to upgrade the graphics card but I didn't want to case swap it because the front IO would make it hard to, but I never thought of changing the mother board. That was very simple and smart way to do it, now I want to do this to my pc. Great video very helpful thank you.
Thanks, for the comment!! I am glad that this was clear for you and helped you out :) If you ever need help. let me know or join the discord
@@PortzTech Thanks, will do
The motherboard for it sucks. When I upgrade it the first thing I'm gonna upgrade is the motherboard.
changing the parts makes it not a swap, that's why. lol upgrading the motherboard means changing the PSU, and most likely the cooler which was used in a case that was designed to make it efficient enough for its other cheap parts. that's half of your internals changed off the bat. nothing about that is case swapping, it's just building and part harvesting.
Great video
Here's some pointers though;
big one is not to touch the cpu pins, hold it by its sides as you can damage the pins and could render it useless.
i would ground myself (remove static electricity) from myself before dealing computers, its not necessary but it definitely is a good thing to do just in case, you can ground yourself by touching a plugged in, but not turned on powersupply or using an anti-static bracelet.
also the thermaltake cooler you have has had some bad rap for being a bad cooler, but for a ryzen 5 5600g (with its igpu disabled) it should hande it fine with good enough airflow.
the 750 watt power supply is a bit overkill especially with a 1650 super (expected powedraw of your system is around 200) but its always nice to future proof with a good quality and wattage psu so no real problem there
but overall if it works it works. so you did a great job and its a real cool mod you did
(also i have a 5600g 1660S version of that same pavilion) lol
also, the power supply sucks in heat from the big fan at the bottom and throws it out facing out the way with the power cord socket faces. they usually have their own isolated cooling so facing down is what you should do, as if its facing up it can suck in some hot air from the case which is not ideal
Thanks, for the input. I will keep it in mind for the future
With the 1660 s , are you running it off a 400 watt power supply? I want to install the msi 1660 s 6gb that require 450 and im not sure if i should do all this or will it run with the 400 watt?
i think he knows
Thank you. Wanted to upgrade my Pavillion Gaming Desktop from a GTX 1650 super to a RTX 3060. And a big piece of advice- get a case with lots of pre-installed fans. I got a 109 dollar MUSETEX case with 6 pre-installed RGB fans and a glass side panel, which I will be using to fit my dual fan MSI 3060
edit: you need a case with a lot of preinstalled fans because the pavillion gaming desktop comes with 3 fans- however 1 is a cpu cooler and one is a PSU fan which only turns on when it needs to, so technically you only have one fan. it can get REALLY hot in that little space
Did the windows license transfer over?
@@giffel979 windows license is on your ssd/hdd so if you transfer that over itll transfer
this is the same thing I was going to do get a musetex case with 6 fans
Portz I just wanna say thank you so much I did it and it’s so great man I wouldn’t know anything about PCs and how far they can go without you thank you once again
No problem! I am glad that I could help you out. Thank you for responding to other peoples questions in the comments.
@@PortzTech hey I have a question do I need to install windows again after changing the case or is All my stuff what I had in my hp pavilion will be there pls help I will subscribe
Have been wanting to upgrade my exact same PC as yours for a while and have always been shot down by everyone saying that it wasn't possible. With your video now I can finally upgrade it! Came across this video just from looking for ways to upgrade the this PC this year, wish I found this video two years ago.
Thank you for the inspiration to do that case switch resp. little new built.
Did it to my TG01-2702ng (AMD Ryzen 5700G and RTX 3060ti) and everything worked fine. I certainly couldn't use the same parts you did, because of my different HP model, but the basic of the stock list with CPU, Mainboard, PSU, CPU cooler and case was the same. (Thermal compount came with my CPU cooler)
I was very sceptical about the 1:1 change of the SSD, especially because of the windows license, first. But also that worked fine.
Just two things for others who want to do it. Might be that these issues did only happen to me, but if you get them, perhaps it might help:
1) I use a pin code to log in to windows. When I started the "new" PC a message appeared at the log in screen, that I have to set a new PIN due to changed safety settings. In my case, the drivers for the wlan card on the mainboard weren't installed at that point, so the only way to set the new PIN was a LAN cable (so you should have some by hand, if you don't use one normally and use W-LAN only).
2) I chosed a MSI Mainboard for the new build. There you have two slots for SSDs. M2_1 and M2_2. The M2_2 slot would have fitted exactly the length of the SSD used in the HP, so i placed it there.
With that placement the PC wasn't able to boot windows at every first start without going into BIOS first. It started in BIOS, I had to close it without changes and then it worked. Restarts were no problem. They worked without BIOS.
After I searched some hours I came to the point, that either the slot M2_2 doesn't support the SSD or the slot isn't able to boot.
After i changed it to M2_1, the boot to windows works fine.
Thanks
Did you have to uninstall the old motherboard drivers and install new ones
No, I didn‘t uninstall any drivers before.
It worked fine without. Just installed the new ones after the first start of the „new“ computer.
At a certain point this stopped being a case swap and started being an entirely new build using a 2nd hand GPU and CPU.
Yea, that is basically what this become for this build series
@@PortzTech OK, but hear me out here, If you are using a new motherboard and power supply and only sourcing your CPU, GPU and SSD from the pavilion, all of which are available off the self, is this really a pavilion build?
Are the temperatures in the new case better?
new mobo = new cpu, at least for me @@DiminuendoBlue
Really not a swap if you’re replacing literally almost everything smh. Just build one at that point
That's exactly what he did, just used the CPU & GPU. Not a case swap in any sense.
Great content, straight forward, helpful.
Thanks!!!
honestly, this is a great PC
I watched all your upgrade video of this pc, and used it to upgrade my pc and it was very usefull, and i was planing to already get a new case but a was a little scared with no video to help me, but after seeing this it made me get the upgrade
That's awesome! Thanks for watching through the whole build!
@@PortzTech Hey bro by chance would you know of a mother board that was like the one in the video, the in the video i had some problems with ordering and i dont know what mother boards are good
@@mrrfush here www.amazon.com/dp/B07FWVJSHC
@@mrrfush Did the Windows license transfer over?
@@giffel979 as long as you use the same storage as you were then it will
Great video but I will recommend holding the CPU from its sides.
Thanks for the tip!
@@PortzTech hey do you think the hp motherboard is good i dont want it to get fried
I defiantly will keep this video saved
Good
Great video nice, easy, straight to the point, but the way you held the cpu killed me
great vid portz tech. would know nothing about this pc without you
That's awesome! I am glad that I could help you out with this!
This is honestly a great video
The only parts you need ...... is EVERYTHING! Except the locked CPU, a used NVME SSD and your old GPU ;) You will really luck out if the old ram is compatible with the new motherboard.
3:48 No you can not "do whatever you want" I mean you can, but if you are running 2 sticks of RAM you should be checking your motherboard and putting them in the proper 2 slots for dual channel capabilities. This arrangement is almost never with the 2 sticks side by side, hence why you see people stagger them
This is sweet. I just put more ram and another fan in mine and spray painted it.
Great Video!
I want to upgrade my pc that has the same specifications as the one in the video and your video encouraged me more to do it! So i am going to upgrade its case, motherboard, CPU cooler :
The new motherboard will be the ASUS TUF Gaming B550M-Plus;
The new case will be the NZXT H5 Flow Compact ATX Mid-Tower;
The new CPU cooler will be the DeepCool AK400 WH.
I was thinking of using the same power supply, storage, memory, CPU and the GTX 1650 from the old case on the new case.
Do you think it is a good idea?
hello I'm a random but I think it would be super cool if you did it for the cooling of the hp pavilion box is doubtful. And I have a question, the motherboard of the hp pavilion can go in the nzxt h5 flow ???
Love the guest star 🐶
Thanks! His name is teddy
Love the vids I wouldn’t know anything about the hp pavilion if it weren’t for your vids
That is awesome to here. I am glad that it can help you out
I recently got myself a pavilion with a ryzen 5 5600g and radeon 6600xt and now i’m wanted to switch it to a new case for better airflow and obviously the looks. I was wondering what a good motherboard would be. Thanks
Edit: Also what power supply will i need to get to fit in a mid tower case
Here you go! Make sure to do some research to make those are the right ones for you.
Power supply - www.amazon.com/EVGA-Supernova-Modular-Warranty-220-GT-0650-Y1/dp/B088SSX883
Motherboard - www.amazon.com/ASUS-Prime-II-Motherboard-Flashback/dp/B08KH12V25
Hey man thanks for showing me this parts and case I have been wanting to change and upgrade my case forever im new to building pc and I just wanted to thank you for showing me parts I could use and how to put it together
I am glad that I could help you out :)
@@PortzTech do you have to reinstall windows
@@PortzTech if you could let me know as soon as possible
@@jacksonbrown7914 if u did the case swap already tell me do u have to reinstall windows
Video has been incredibly helpful, although I know it wont be possible but could you potentially make another video where all you do is change the case from the hp pavilion to the new one using everything in the old case (If there are some stuff that is required to be added then those are ok too) the reason im asking this is because my pc isnt very good and if i get a new case i can start customizing stuff inside it but i would like to customize stuff one by one tysm
Hey I also have the same pc and I was wondering how to do this but on the go pavilion you know how there’s the usb ports on the front of the case well you have to change the mother board only because then there would be no slots on your new case for those ports to go into Im thinking of doing the same thing I hope you have good luck with your pc 😁
@@Isaiahz2006 ty
@@emir2996 Of course, also I'm searching whether the power bank can work on a different case or if its only used on the pavilion do you happen to know that at all its okay if you dont
@@Isaiahz2006 I unfortunately do not know, but if you happen to get any information on that, you mind just answering right here?
You can’t do that unfortunately, it’s a proprietary mobo and won’t fit another case. You’ll have to swap out the mobo, and the PSU is also made specifically for the HP mobo. You’d be better off just building a new PC and using the gpu/cpu/ram etc from your prebuilt
11:40 😂 I've watched this before when I first thought about a swap, thinking and it again. Never noticed the pups steal the screwdriver though😅
Does anyone know if this motherboard can support ryzen 5 5600g processor?
If your switching your case and or upgrading just like this, can you transfer the original motherboard to the new case or is it permanently in the original case? Sorry I know this is probably a dumb question but I'm new to this.
I have the same question
Thank you bro I have an Hp tg01 0030 and the main nvme went bad. So I was going to make a bootable drive and replace it. But your project makes sense and is affordable.
Honest question: What performance did you gain by doing a case swap? What is the benefit?
Better airflow and temperatures
Also the option to get rid of the shit motherboard and psu
But is it worth it?
@@RobVI fair enough. Thanks.
Thank god you had sense to upgrade that crappy MB... I just rebuilt my old Acer pre build for my buddy and told him he must spend 200 dollars on a new MB, PSU and case lol! And you must stagger the Ram so its set up in dual channel! I recommend looking in the MB book to find out what Ram Channels you need to use!
Did the windows license transfer over?
Great vid would love game play from your new setup
Coming soon!
no one gonna talk about the dog stealing the screwdriver lmao, thx for the video
I really need this case swap Mostly for the fans because the regular case barely has any vent areas for the pc to cool its self off Thank you for the links!!!
lol it do be true
WARNING!!!! you can’t NOT use the old cooler it doesn’t fit on that motherboard! Unfortunately I noticed it during doing this swap and have to rush and get a new one. Please be aware so that you don’t have to go though the same frustration as me… Also you need to check on your motherboard in what slots the ram sticks are supposed to go for dual setup. It’s not just whatever you feel like.
You need a new motherboard, power supply and cooler to do a swap unfortunately.
Wish I would’ve read this before hand
you can. you just need to remove 2 diagonal screws and then just connect it to the mainboard by secure with the 2 remaining screws
Good video but this is basically building a new pc
Yea, that is what it takes basically to swap it to another case
@@PortzTech i wouldn't mind just changing the motherboard. Also if you move the ssd with windows on it to another motherboard, will it still work as normal and boot from it?
Great content, brother!
Thanks brotha
I was able to pick up the all ryzen variant including a ryzen 5 5600g and rx5500 for $400 and I can't say how much of a steal that is
the dog stealing your phillips head lmaooo
He has gotten better lol
Hey I’m 15 planning to save up for the TG01-1120, Shadow Black variant i5 10400f, 1650, will I need to change the motherboard or is it the same thing for case swapping
@Portz Tech can i use evga supernova 750 GT 80 plus gold 750W instead of evga supernova 750 b2?
I need answer fast
This was a very helpful video I'm going to be upgrading my huband's pc!!!!!
great vid , i've been contemplating this for a few months now . shopping for the case n cooler now
the PSU IS NOT AVAILABLE AT THE MOMENT , ANY RECCOMENDATIONS ?
@@BiGDeE3 yea, you can go with any power supply like this one
www.amazon.com/dp/B084R89CJ5
@@PortzTech thx man
No problem!
@@BiGDeE3 Did you end up doing it? Did the windows license transfer over?
Great video ! I have a PC like this one except it has the i5 Core. Can I use the motherboard you have in your description or do I need a different one ?
I need the same answer lol
Hey sorry I’m kinda a newbie so u can use the same ssd and sill get the OS Windows on it
Yes you will
hey i bought a hp pavillion pc it has a ryzen 5 5600g with a rx 5500 graphics and wanted to change my pc case in the future for better air vent which motherboard and powersupply will u think would suffice
and awesome vid
Thanks!! Here you go! Make sure to do some research to make those are the right ones for you.
Power supply - www.amazon.com/EVGA-Supernova-Modular-Warranty-220-GT-0650-Y1/dp/B088SSX883
Motherboard - www.amazon.com/ASUS-Prime-II-Motherboard-Flashback/dp/B08KH12V25
Ive done upgraded my pc video helped alot thank you only question/ help i need is how to deal with wifi component im not sure where it goes
This really helped me thanks!!!
Hey, I am glad to hear that!!!!
What about storage? Did you purchase storage or use the one from the HP? New to building PC's here.
@Officialmotivationaluniversity I did this to my pavilion 2 years ago. I put in the M.2 that came with it since it already had window install and activated but i would recommend to do a fresh install of windows since there a lot of bloatware out of the box or you can uninstall the applications one by one.
Your ram is in the wrong spots so you are not using dual chanel. Great video!
Thank you for letting me know
@@PortzTech A2/B2
Does this need a different motherboard or are these chassis you can find for better airflow without replacing the motherboard?
You have to replace the motherboard it will not fit in the case without a new motherboard
If you carry over the same motherboard several things will need to be addressed:
1) if you’re lucky you may be able to mount four standoffs
2) the original PSU will likely only fit one screw on the case unless you 3D print a template
3) a new PSU will need an adapter since the motherboard isn’t 24 pin (don’t recommend splicing and soldering old connector to new PSU)
4) you will lose your front USB ports, audio jacks, and card readers (with the USB ports you could use then as an internal to external solution or mod an extension cable to an open bay or run an open case to reach in and still use those three items).
5) you will need an exterior power button mod (either by relocating an alternative or modding an extension arm to reach the original, keeping in mind the indicator light).
It can be done with a lot of work, but with the BIOS limitations it’s better to get a new board.
Can you take of the black plate and replace it with glass is that possible
no it is not possible. You could get craft and manage to do it somehow, but at that point you could just get a new case
Im just tryna change the case
Is there anything that i can keep that fits in the new case and
what do i need to buy for the new case (idk computer stuff)
Cheers bro. I love you.
Love you too
Hey I’ve got a hp pavilion gaming pc too it’s got a Ryzen 7 3700x with an rtx 2060 super and I’m planning on changing the case for better cooling and looks. I might have to change the mother board if so what motherboard do you recommend.
This one would work for you.
www.amazon.com/GIGABYTE-B450-AORUS-PRO-WIFI/dp/B07FW85VFT
Did you end up doing it? Did the windows license transfer over?
great work!
4:00 Please use dual channel don’t just put the ram wherever you want
Hey man I don’t know how active you are now a days
However you should get a better cpu cooler if it’s working fine for you don’t change it
Looks like that case got AIO support too but I think tower cooler will work best there are inexpensive ones out there
I use the Vetroo v5 cpu cooler it was about 30 bucks if I remember correctly and it performs very well on my 10400f
11:39 omg they're your assistant!
haha that is little teddy
Great vid. But could you find an other motherboard and power supply that still support and same budget? There’s none in stock but I really wanna upgrade. Love the vid man keep it up
I hope this helps you out! Thanks, for the comment on the other comment
For the motherboard
www.amazon.com/GIGABYTE-B450M-DS3H-Ryzen-Motherboard/dp/B07FWVJSHC
For the powersupply
www.amazon.com/EVGA-WHITE-Warranty-Supply-100-W1-0500-KR/dp/B00H33SFJU
@@PortzTech thanks man. I’ll save up to buy this
What would be a good alternative motherboard? the price increased to over 100 for that one.
does the mother board have to have an argb fan header for the case fans?
Any motherboard that is the b450, just make sure to do some research to make sure it will work
What motherboard would be good for a Ryzen 7 5700G with a rtx 2060 super?
I would recommend an asus motherboard. If you need more help feel free to join the discord
Do you have to swap all your data ? And I'm going to be doing this this week thanks for the guide
No, you do not have to
@@PortzTech one more question is the motherboard a good choice or should I go for a different one because Amazon reviews are kinda weird some good some really bad
Did you end up doing it? Did the windows license transfer over?
@@giffel979 that's what I want to know. How did windows act?
So do I have to buy new parts or can I just use same parts and just move them
nice video!
Thank you! Hope you enjoy the content!
Do you kee the hp software and windows if you swap the motherboard? Im not a prof so maybe its a dumb question idk.
Do you have to buy another windows key for the motherboard or will it still be on the ssd?
No, it will be on the ssd nvme that you swap over
@@PortzTech Is this for everyone? I have heard that its kinda random?
if yo udo get this same pc model, get a b550 board as the board in the PC is b550 so you don't want a downgrade
Cool build and all, but this is still not a "case swap". lol It is a build with harvested and new parts. Title it correctly. Pavilion is not really designed to be upgraded/swapped, and the upgrades you CAN perform typically only extend viability a couple to a few years due to increasing demands of newer technology and software. They also cost way more than just designing a custom rig off an internet shop. HP prebuilds like Pavilion Gaming CANNOT be swapped without a lot of heavy modification to a new case and or purchase of adapters. The main issues are the HP board is not ATX compatible, they are proprietary like the PSUs, which means they require the case HP designed to seat them without making contact. The second issue is the I/O ports are baked, rather than using pin connectors and harnesses. Between these 2 factors, you would have to purchase an oversized case, fab custom seats for everything to mimic HP Pavilion internals, and lastly use adapters and other tools to fab a custom I/O panel. Only then can you perform a true swap. That's not to say it can't be done. It just isn't worth it unless you happen to have a Pavilion.. and the time. And all that extra stuff you shouldn't have to buy to do a proper swap. lol
How do you transfer the operating system?
Its in the ssd itll transfer fine if you install the ssd
This is a great video! Can I use any case, cpu fan and 750w power supply? Thank you!
You can use any case that is basically a full size atx case. You can use a lower watt power supply too just make sure it’s a atx power supply. You need to make sure your cpu is compatible with the motherboard
Basically to swap the cases you need another motherboard right? In the service they told me they couldnt swap the cases
You just need that motherboard and you should probably just spend little more and get a new psu
I like how he try so hard on those "hand made" transition effect
Jeez I really want to do this but I’m just scared ima break it
You can probably do it without breaking it
@@PortzTech yuh I’m gathering the money to do it now wish me luck and the power supply you suggested is out of stock any other power supply you can recommend that can work in this build?
Same bro
Here is the power supply you could use
www.amazon.com/dp/B084R89CJ5
Good luck!
Awesome vid love this. However I have a question. How would I be able to install that stock cooler on the new mobo?
Dope video. One question can I use the same nvme drive that comes with the hp pav I have a good amount of stuff on their or do I need a new one.
Yes, you can use the same nvme that comes with the hp pavilion
Portz Tech thank you and one more thing is the silver part/Hard drive holder and black part needed I don’t see any purpose for it besides hold SSD/HD can I remove it to increase air flow.
I got the same pc, i recently upgraded the ram and the GPU, if you have this pc you can upgrade to the rtx 3050 without upgrading the PSU
I would suggest getting a bigger psu if you do. The one that comes with it is only 400w and I would not trust that to last long with a 3050
@@PortzTech it only draws 220 watts, so far no performance issues or crashes of any kind, runs smooth at high settings. I think in some cases, the gpu upgrade is a marketing scheme. This runs just fine.
@@DAVIDJNUNO Hey does your pc still run good with the 3050 because I have the same pc and wanted to upgrade the 1650S to something like a 3050 but I'm not sure about the psu and I dont know what sort of psu I would need for this pc
I bought the tg01 2360 it have a ryzen 7 5700, rtx 3060 nvme 512 go for 1149 I hope I did buy something good I am new to this pc world play COD and it was amazing I didn’t think I am going to play on console after the experience. Can the fan of the cpu be change to another one or I have to buy a cooling system? How can I backup the files on the nvme I want to upgrade it?
Yea my newest video shows how to do the whole motherboard
can I replace the side panel with a clear specifically for this pc?
I really like it but I wish it had more rgb on the bottom of the tower
yoo would a Ryzen 5 4600 G be compatible with the motherboard you used? also what other power supply will work with the case you used since the one you linked is out of stock?
It may be with a bios update, I would just look for like a b550 something slightly newer. Just do some research on which ever one you pick
I upgraded this pc ram with corsair vengeance and nvme with a Samsung 970 evo plus and now I can’t get it to display.( I did a recovery data on a usb also) I didn’t touch the Gpu and ❤the ram and nvme is seated correctly, but I can’t figure out why it won’t display can someone please help🙏🏾( I tried putting the old ssd and ram back in and still no display
Thanks
No problem
Would you suggest me doing this ???
Yea, it is straight forward just time consuming and it looks great!
So in order to case swap we only need to change the mother board and power supply ?
Same question
did you just plug in the SSD and boot up or did you format and do a fresh install of Windows?
Just plug n play. No need to reload windows as it’s still on the nvme in the motherboard
Hey do you have to change the motherboard if you want to swap the case to a mid tower case or can I use it in a new case, just basically use it
yes, you have to
can i use a diffrent power suply?
One more question, do u have to reactivate windows or will it stay the same?
Stay the same
It will stay the same and you will not have to
Would you know how to go about also adding in the hard drive to this build? im new to pc's, and im planning on doing this swap and upgrading from a 1660 super to a 3060 ti. Thanks
How you go to the BIOS for this PC Desktop? Please help
Can you use any new gaming pc case like the Lian Li 011 dynamic? I've had my eye on that case.
Yea that would work for this swap
i've got the HP Pavilion 790-0504NG and rly need help how to install the new ssd. i have no clue how to do that, sitting in front of my opened pc and try to release the hdd, but it won't work....
Thank you I been trying to do this for a long time just didn’t were to start since I’m new To playing in pc, Any other recommendations on cpu fans
Noctua cpu fan is really good
Noctua is great!
hyper evo 212, aio cooler, or a noctua are all great choices
Did you end up doing it? Did the windows license transfer over?
Am I able to stick with the stock motherboard and power supply ? I’m happy with my pcs performance as it is
No you will need to swap motherboards for it to fit
2 month ago i buyed the 1200€ Pavillon Gaming pc, later i heard about that lil laptop cpu.
I Want to Change the case like you. My question, my pc got 16 gb ddr4 a GeForce rtx 3060ti and a Intel®Core™i7-11700F 2,5 ghz
Can i use the Same cooler, mainboard and other parts like u? Is the Change from the Intel parts the Same like Ur ryzen?
You will need a different motherboard and I would recommend a different cooler. Join my discord for more help on picking parts out
After you change the motherboard on this pc do you have to reinstall anything or is it plug and play
It should be plug n play. If you have more questions, join my discord
Yeah can this pc run games like Minecraft Java and cod warzone at playable fps? I saved up for the series s (im 15 no job) and it was good but I want to play steam games would you say the 5500 gpu variant is good?
I would try to stay with the Nvidia cards if you can and it will play those games
Would the ASUS Prime B450M-A II work on this build I got all the parts just need the motherboard
Yes it will