I have the same truck as you. I bought the 21-22 OEM F150 tow mirrors without the camera from fairway ford off of eBay and everything works including the blinkers the puddle lights. it all snapped right in I didn’t have to modify anything. I did however watch your video for instructions On how to remove my old mirrors and put the new ones in which was very helpful. Thanks a bunch! Theses are the mirrors I bought from (21 thru 22 F-150 OEM Ford Power Trailer Tow Mirrors Manual Fold No Camera/BLIS)
Thanks for sharing. I just ordered mine from fairway ford directly on their website. It was cheaper even though I had to pay for shipping. I also saved since I didn’t pay taxes, and eBay collects taxes.
Thank you! Great video - I was able to get my puddle lights and turn signals working by enabling them in ForScan… enabled turn signals and puddle lights only options in the DDM (Driver Door Module) and PDM (Passenger Door Module)
How do I add turn signal to the new tow mirrors my factory Mirrors didn’t have a side marker now these new ones do how do I get them to work ? Any ideas
The K-source Snap on Tow mirrors always are out of stock on back order. I would consider doing this, but My truck would no longer fit in the garage next to my wife's
Just installed my 2018 take off tow mirrors onto my new 2021 stx. I also had to knock the set pins off as well as trim the mirror. I also had to drill the bolt holes out bigger that are closest to the edge of the door. Please give an update if you figure out making the mirror signals work, thanks!
Any issues when putting truck in reverse? Not sure if you have reverse brake assist but mine no longer works after changing mirrors. for those who are looking to swap mirrors on trim 302a and up you need mirrors with the temp sensor in the mirror otherwise you’ll pop the CEL. Also it’s a 22 pin not 32 pin ;) great video though.
Yes after installing my 2021 Ford factory towing mirrors I get that message on my screen every time I put it in reverse. Ausel does anybody know how to make the marker lights work?
I want to do this but as soon as I do, Ford will probably release the 2021 part. I’m torn about making that curved cut. Trying to think of how I could make a little jig / template.
I have a 21 with the 302A trim option and my mirrors are like your stock ones power but mine have the puddle lights, camera, spot lights, turn signal and the little warning light in the mirror for someone in the other lane. No defrost though. Did you get these from the dealer or elsewhere
Is the 2021 Air Temp sensor not on the Passenger Mirror anymore? I'm looking to get the manual everything mirrors JL3Z-17696-AA (to use only when towing and put factory back on when not) and it has an 8pin plug as opposed to the 22 pin on my 2021 XL/STX. Those manual everything mirrors only have temp sensor wiring for the passenger.
Did you get the marker lights (amber lights) to work? I was told I needed forscan. Dealers haven't been helpful. They installed ml3z17696CA but they can't get the lights to work!
Hey man, great video! Doing the exact same thing on my 21 XL STX. Found these without the turn signals and puddle lights; thought it might help your viewers. I will follow up as soon as I get them installed.
@@CaliMotoTV sorry, meant to include the link. www.carid.com/spyder-xtune/driver-and-passenger-side-power-towing-mirrors-mpn-mir-ff15015-g4-pwh-set.html
@@CaliMotoTV install went okayish... Not sure how yours were made, but the rivnuts in the these mirrors were only into plastic, not any metal internal frame. 3 stripped out. I epoxied and mechanically connected the rivnuts to the body to make sure they stay put. Now, got to convert to the new wiring connector... I wouldn't recommend this route unless the turn signals and puddles are a non-starter like they were for me. Anyone know anyone that can make a pigtail wiring harness to convert to the new connector?
Am I the only one who wants the small mirrors 😅? I hate my tow mirrors as I don’t tow anything and I have to fold them manually every time when I park in my garage !!! Anyone wants to trade ? Lol😅
Gotta go metric , lol! i am in Canada and my 2021 F150 Lariat does not have the American flag ...from what i understand the U S and Libya are the only countries in the world who have not gone metric !
I have the same truck as you. I bought the 21-22 OEM F150 tow mirrors without the camera from fairway ford off of eBay and everything works including the blinkers the puddle lights. it all snapped right in I didn’t have to modify anything. I did however watch your video for instructions On how to remove my old mirrors and put the new ones in which was very helpful. Thanks a bunch!
Theses are the mirrors I bought from (21 thru 22 F-150 OEM Ford Power Trailer Tow Mirrors Manual Fold No Camera/BLIS)
Oh cool, good to know. That's for sharing.
Thanks for sharing. I just ordered mine from fairway ford directly on their website. It was cheaper even though I had to pay for shipping. I also saved since I didn’t pay taxes, and eBay collects taxes.
David Gardner, do your blinkers light work fully or is it just two dots that illuminate when signaling your blinker?
Thank you! Great video - I was able to get my puddle lights and turn signals working by enabling them in ForScan… enabled turn signals and puddle lights only options in the DDM (Driver Door Module) and PDM (Passenger Door Module)
Just did mine today! Got a set for $150 from a 2021 F250. Took less than half an hour. Works perfect!!!
Where did you buy them from?
@@borisstupar5147 Facebook marketplace.
Great video!
Did you ever figure out the blinker? I didn't see a follow up video.
crazy how two tow mirrors have different mounting tabs, pegs etc...great vid
Ok. I installed the mirrors. My cuts look pretty decent. Now I’m ready for your video with the splices for the marker lights and puddles.
any updates/ideas?
Same here I got it on zero cuts zero problems but marker lights don’t work because my factory ones didn’t have them before
Great video Bill!! waiting on my mirrors and cant wait to upgrade to the "What should have been included" mirrors to my 2021
Do the mirrors fold in
No
How do I add turn signal to the new tow mirrors my factory Mirrors didn’t have a side marker now these new ones do how do I get them to work ? Any ideas
We haven't been able to figure it out yet.
The K-source Snap on Tow mirrors always are out of stock on back order. I would consider doing this, but My truck would no longer fit in the garage next to my wife's
Bummer!
Any issues with the Ambient air temperature sensor in the passenger side mirror. I keep getting this error.
No, no issues.
Your camera is awesome!
Just installed my 2018 take off tow mirrors onto my new 2021 stx. I also had to knock the set pins off as well as trim the mirror. I also had to drill the bolt holes out bigger that are closest to the edge of the door. Please give an update if you figure out making the mirror signals work, thanks!
Did you figure out the forscan for the blinkers?
Nope, sorry. Quite honestly didn't have the time to set aside to figure it out yet.
Any update on turn signals?
But how did you find your 10mm socket????
I have lots .
Where did you get the wheel liners??
FYI they now have parts available for the '21s, and several models with BLIS/360 and power/manual (though the priciest one is $1700...oof).
Thanks for the video bud! I also have a XL w/ STX package
Me too! Love the truck! Thanks for the video!
Any issues when putting truck in reverse? Not sure if you have reverse brake assist but mine no longer works after changing mirrors.
for those who are looking to swap mirrors on trim 302a and up you need mirrors with the temp sensor in the mirror otherwise you’ll pop the CEL.
Also it’s a 22 pin not 32 pin ;) great video though.
Yes after installing my 2021 Ford factory towing mirrors I get that message on my screen every time I put it in reverse.
Ausel does anybody know how to make the marker lights work?
@mike fries Did you ever get an answer?, I am having the same issue.
No not yet
Does anyone know how i can get the mirror turn signals to work on the xl? I swapped my stocks to tow mirrors and the puddle lights/signals dont work
We've still not figured it out. Sorry.
Same here I might just open it up and make the blinker work if not sure about the puddle lights
I want to do this but as soon as I do, Ford will probably release the 2021 part. I’m torn about making that curved cut. Trying to think of how I could make a little jig / template.
You can start by tracing the existing curvature of the mirror and then transfer the template to the new piece.
Hi great video, what is the part #
For the towing mirrors ,
Thanks in advance 👍
Did you ever figure out how to use the blinkers?
Unfortunately I didn't. I tried using the forscan but couldn't find the setting
I found a set for the 2021 but has to be programmed at the dealer 😕
What? A basic part and no bells and whistles? Who are you and what did you do to Bill? :) :) (j/k)
What year f150 did these mirrors come from ?
I have a 21 with the 302A trim option and my mirrors are like your stock ones power but mine have the puddle lights, camera, spot lights, turn signal and the little warning light in the mirror for someone in the other lane. No defrost though. Did you get these from the dealer or elsewhere
Dealer.
Very cool. Do they do Blind Spot monitoring too?
Is the 2021 Air Temp sensor not on the Passenger Mirror anymore? I'm looking to get the manual everything mirrors JL3Z-17696-AA (to use only when towing and put factory back on when not) and it has an 8pin plug as opposed to the 22 pin on my 2021 XL/STX. Those manual everything mirrors only have temp sensor wiring for the passenger.
Where do I get a set
do the signal lights work?
Not unless your factory mirrors had them before
did you sell your original mirrors yet
No still have them
@@CaliMotoTV Do you plan on selling them
@@bennymathew8531 send me an email calimototv@gmail.com
I ordered mirrors w the temp sensor and 22 pin connection…still throwing the code. Any ideas?
ever get this figure out? We ordered OEM from ford for our '23 XL and its throwing codes and not functioning properly
So does this mean I can put these 2021 mirrors you took off on my 2018?
@@CaliMotoTV sell me yours. Lol
Do you know if I install on my 302a xlt with blis, will this pop a check engine light being these mirrors don’t have blind spot monitoring?
Did you get the marker lights (amber lights) to work? I was told I needed forscan. Dealers haven't been helpful. They installed ml3z17696CA but they can't get the lights to work!
Not yet. We haven't had the time to work on it.
Don't try this if your truck comes with the tow package.....lol
Hey man, great video! Doing the exact same thing on my 21 XL STX. Found these without the turn signals and puddle lights; thought it might help your viewers. I will follow up as soon as I get them installed.
@@CaliMotoTV sorry, meant to include the link. www.carid.com/spyder-xtune/driver-and-passenger-side-power-towing-mirrors-mpn-mir-ff15015-g4-pwh-set.html
@@CaliMotoTV install went okayish... Not sure how yours were made, but the rivnuts in the these mirrors were only into plastic, not any metal internal frame. 3 stripped out. I epoxied and mechanically connected the rivnuts to the body to make sure they stay put. Now, got to convert to the new wiring connector... I wouldn't recommend this route unless the turn signals and puddles are a non-starter like they were for me. Anyone know anyone that can make a pigtail wiring harness to convert to the new connector?
I did this but now have a service engine light on.
🤔
Using some getter done engineering
OK can you put up the link where to buy it from I have the same truck as you please
Am I the only one who wants the small mirrors 😅? I hate my tow mirrors as I don’t tow anything and I have to fold them manually every time when I park in my garage !!! Anyone wants to trade ? Lol😅
Teslas got worse gaps 😂😂😂
Gotta go metric , lol! i am in Canada and my 2021 F150 Lariat does not have the American flag ...from what i understand the U S and Libya are the only countries in the world who have not gone metric !
how much further do they stick out versus the stock mirrors?
No idea didn't measure it. Few inches.