I took my mower to gladwin Michigan and got to ride with ATC's and ATVs and had no problem keeping up with them I'm the one that has the mower that does 40mph thank you for giving me a new hobby and now I'm in it to deep but I love it so thanks again best wishes to you and your family and God bless
Eh, just leave it be. Those transmissions are a pain the pull out of the tractor/aluminum housing w 2 bolts on either side of the trans. Got the same trans in my sears st16, & snapped off both of the bolts on one side. If u don’t have to mess w it don’t. You can’t get parts for em anymore. The high low range shaft will leak like crazy. It’s leaking on my sears & gonna throw some 85w oil in it so it won’t leak, but it’ll have fluid in it.
I finally got me a garden tractor. But its got a lot wrong with it. Engine issues transmission issues fuel pump issues starter issues. Two tires won't hold air. The only reason I bought it is cause it looks like a farmall tractor. It's a mtd 2055 12 speed with high an low range. 6 high and 6 low. Plus two speed reverse. And I thinking on getting 2 more gts
When any vehicle won't go in soft sand or dirt, LOWER THE TIRE PRESSURE TO ALMOST FLAT and drive out. Air up asap to prevent tire damage. I recently saw two $75,000 4 x 4 pickups get drowned in saltwater because they did not have enough knowledge to simply lower the tire pressure.
This is cool to see. I’ve been dying to put either mud tires or paddle tires on my pulley swapped lawnmower and here’s why. My buddy has a private beach so whenever we go jet skiing we unload in the sand. I think it would super cool to do it with a lawnmower. I might make a video of it just to have some content
Dude I'm a huge fan of the channel I just recently bought a 1987 craftmen ll because yours inspired me to build my own it's Gunna be called project gun smoke she's Gunna be a beast
Thanks for the shout out chud I'll stay a true fan man also if you fancy needing mtd or Troy built mower parts I have two runners I'd be willing to parts with for cheap due to the deck issues I've been having
Wish you were near Indiana, I'd pay you to make me a plow mower and a fun play around tractor lol. I love watching all the things you do and come up with.
Good times! Great video. Im sure you were ready to cut that piece off the trailer that got you high centered lol. Some off road tires on the trailer would be a help in the sand. I wound up putting 25s on my little 4x8 mower trailer. It helped a ton! Enjoyed the video!!
Definitely needs either ball or tapered roller bearings for the front wheels (reduces the rotational drag of the front tires and the wear on your spindles).
Think it might have oil soaked the cylinder while you were sitting on that incline. You got stuck for a second and she was tilted pretty far over. That would explain the sudden smoke, and why it came back to life after. Either way, great vid! #truefan
How did you set up the exhaust on the Poulan I have been trying to set the same thing up on my case tractor that I have it's a 1954 I have a industrial V-Twin 16 horsepower engine on it and I would like to put a smoke stack on it similar to what you have on the pollen if you have any advice for me I would sure appreciate it Daniel Ayers
I found 2 chrome pipes for a Harley at a car show. Bought them for 15$ and adapted on to the poulan. I still have another for a future exhaust system. With a Vtwin I would build a two into one pipe, then do one stack. I feel it would be hard to make 2 that match. I use pressure washer cart pipe to go to the mower exhaust. The cart usually has several 90's and my last had a couple of 45's too. Come in handy, I need to find more old pressure washers. Thanks for watching
3000 cow dairy farm i work at they have 4 yamaha grizzly 700 the TINY TINY cv axles blow out and any kind of trailer towing it's hard to steer have to make ridiculous wide turns grizzly not cheap tons of power terrible on gas mileage tires go bald fast
![SahBabii - Viking [Official Music Video]](http://i.ytimg.com/vi/D37cL92JX0I/mqdefault.jpg)
I took my mower to gladwin Michigan and got to ride with ATC's and ATVs and had no problem keeping up with them I'm the one that has the mower that does 40mph thank you for giving me a new hobby and now I'm in it to deep but I love it so thanks again best wishes to you and your family and God bless
Where you located we get 20+ mowers at ogemaw hills, west branch, st Helen, gladwin
I smell a colonel craftsman locked rear end soon in the future
Eh, just leave it be. Those transmissions are a pain the pull out of the tractor/aluminum housing w 2 bolts on either side of the trans. Got the same trans in my sears st16, & snapped off both of the bolts on one side. If u don’t have to mess w it don’t.
You can’t get parts for em anymore. The high low range shaft will leak like crazy. It’s leaking on my sears & gonna throw some 85w oil in it so it won’t leak, but it’ll have fluid in it.
@@michaelbenoit248 that's a very good point, I should have thought about that
hey Chud its Lonnie the kid who bought the ZOMBIE MACHINE mower.I hope you have a great thanksgiving.
Thanks so much and you too. Still need the parts? Is it running yet?
Woot Silver Bullet, And True Fan
Thanks so much and I am fan of the stickers! thanks for watching
I finally got me a garden tractor. But its got a lot wrong with it. Engine issues transmission issues fuel pump issues starter issues. Two tires won't hold air. The only reason I bought it is cause it looks like a farmall tractor. It's a mtd 2055 12 speed with high an low range. 6 high and 6 low. Plus two speed reverse. And I thinking on getting 2 more gts
Sounds very cool!
Thanks for watching.
Since the John Deer is no-longer an option, Colonel craftsman is my new favorite, I can't help it, lol, great video, and thanks for sharing.
Pretty cool video! Cornel craftsman might have to get chains on top of the executioners haha, thanks for posting
When any vehicle won't go in soft sand or dirt, LOWER THE TIRE PRESSURE TO ALMOST FLAT and drive out. Air up asap to prevent tire damage. I recently saw two $75,000 4 x 4 pickups get drowned in saltwater because they did not have enough knowledge to simply lower the tire pressure.
Yes, most people do not know that truck and many would not know how to let the air out... Thanks for watching.
Silver Bullet looks awesome!
This is cool to see. I’ve been dying to put either mud tires or paddle tires on my pulley swapped lawnmower and here’s why. My buddy has a private beach so whenever we go jet skiing we unload in the sand. I think it would super cool to do it with a lawnmower. I might make a video of it just to have some content
Good video as always.... I would like to see another mower resurrection
Planning some just need more time thanks for watching
Understood ...you just Can't rush perfection 👌
@@mcproductions2151 stated perfectly. Thanks so much!
Dude I'm a huge fan of the channel I just recently bought a 1987 craftmen ll because yours inspired me to build my own it's Gunna be called project gun smoke she's Gunna be a beast
Thanks for the shout out chud I'll stay a true fan man also if you fancy needing mtd or Troy built mower parts I have two runners I'd be willing to parts with for cheap due to the deck issues I've been having
Mastering the sugar sand! MM
I love all your videos and you inspired me to start making a mower of my own
Great job, hope the issue isn’t costly!!!
Wow me and my friend wach you we love what you do with mowers we like to do stuff like that to you make great videos
Wish you were near Indiana, I'd pay you to make me a plow mower and a fun play around tractor lol. I love watching all the things you do and come up with.
Always love your videos
Thanks always love your comments. Thanks for watching
Good times! Great video. Im sure you were ready to cut that piece off the trailer that got you high centered lol. Some off road tires on the trailer would be a help in the sand. I wound up putting 25s on my little 4x8 mower trailer. It helped a ton! Enjoyed the video!!
Cutting that piece off is on the list before hitting the trails. I did not think about different tires, good idea and thanks so much for watching.
Have you ever thought about building a 4wd tractor? Colonel craftsman would be a beast with 4wd . Might be a little tricky to do but it’s possible.
need some more mower build content
I have a couple more that need to be built, I will try to get you some soon and thanks for watching.
Always enjoy these vids
Definitely needs either ball or tapered roller bearings for the front wheels (reduces the rotational drag of the front tires and the wear on your spindles).
Would be cool and thanks for watching
Think it might have oil soaked the cylinder while you were sitting on that incline. You got stuck for a second and she was tilted pretty far over. That would explain the sudden smoke, and why it came back to life after. Either way, great vid! #truefan
Head gasket
I enjoy all the content of your's .👌.Thank you 👌for posting your videos on RUclips . Keep on keeping on 🚜ya legend 🚜
Thanks so much and will do, just keep on watching.
Am i fan of your content
great video. you should make colonel craftsman 4x4 it could be cool
Awesome!!!
I'm glad the mowverlander name stuck chud lol
13:57 soooo satisfying
Agreed 100%, I love playing in that sand. Thanks for watching!
How do you make it so fast
Pulley swapping is the best way to make it fast, gas pedal and taller tires also help. thanks for watching.
I just had a mower but it just cot on fire
Sorry to hear that , hope you can fix or find another. thanks for watching.
Thank you
You need to let almost all the tire pressure out and you’ll go a lot further
Good point and thanks for watching
What pulley swap is on the silver bullet?
6 inch in the front and 5 inch in the back. Thanks for watching
@@chud327 awesome thats what I plan on doing to my craftsman!!
Man I haven't seen you in a long time
Most people do not know that tip, thanks for watching
Was it as long as it took me to reply to this comment? Thanks for watching
Make a snorkeled mower
Good suggestion and thank you for watching
true fan
Are your mowers chain or belt driving if belt driven do you have issues with the belt slipping
vid idea: snorkel mower?
Good idea and thanks for watching
How did you set up the exhaust on the Poulan I have been trying to set the same thing up on my case tractor that I have it's a 1954 I have a industrial V-Twin 16 horsepower engine on it and I would like to put a smoke stack on it similar to what you have on the pollen if you have any advice for me I would sure appreciate it Daniel Ayers
I found 2 chrome pipes for a Harley at a car show. Bought them for 15$ and adapted on to the poulan. I still have another for a future exhaust system. With a Vtwin I would build a two into one pipe, then do one stack. I feel it would be hard to make 2 that match. I use pressure washer cart pipe to go to the mower exhaust. The cart usually has several 90's and my last had a couple of 45's too. Come in handy, I need to find more old pressure washers. Thanks for watching
It look’s nice
Thanks so much and thanks for watching!!
Fun times
Is this near Arcadia Florida
I am not sure where that is so I guess not. I am just north of Jacksonville in Georgia. Thanks for watching.
Where can I find your email address I need to send you a picture of my Colonel Crafsman
What about to my Facebook? Chud channel, would love to see it and thank you for watching
When doing a puppy swap what size do you put.on the team soon of the mowers🙄🙄??
Team soon? Thanks for watching
@@chud327 I mean.pully swap
@@robertmailhos8159 I guessed that, but can’t figure team soon…
@@chud327 I was typing on my phone with a small keyboard so it was a type o
3000 cow dairy farm i work at they have 4 yamaha grizzly 700 the TINY TINY cv axles blow out and any kind of trailer towing it's hard to steer have to make ridiculous wide turns grizzly not cheap tons of power terrible on gas mileage tires go bald fast
Dang, sound like trouble... Thanks for watching
lower your tire pressure
Good idea and thanks for watching, BTW, went back yesterday, the video should be out tomorrow. You are the first to hear about it ...
4x4 mower
1st and amazing vids btw