1 MADL challenge with Schmeisser AR15 (uncut)
HTML-код
- Опубликовано: 24 июн 2024
- As some people had doubts about this achievement i decided to upload uncut video (at 6x speed) of me shooting a sub MOA group with my AR.
SETUP:
- rifle: Schmiesser S4F
- barrel: 10.5" Lothar Walther 1:9 twist
- suppressor: Valhalla CQB Mk2
- mount: UTG Pro
- scope: Integrix i8X
- ammo: Sellier&Bellot 69gn HPBT match
SHOP: polenartactical.com/shop/
/ polenartactical
/ polenartactical
/ polenartactical
@SellierBellotAmmunition has sponsored this video with top quality ammo
/ sellierbellotammunition
/ sellier_bellot_official 
Наука
Don't ever challenge a German sausage maker to a competition.
It brings out the wurst in him.
After reading this over breakfast, I can truly say my day has gone from bed to wurst.
I tighten all my bolts to "german spec," ya know? "Gitit gud intight."
Ziss one was heilarious
But when the Wurst is very lecker all is gut and the Magen is zufrieden.
My Schmeisser is uncut too. I just have to clean it more often so it doesn't get infected.
😆 duh fuk
😂😂😂😂😂😂
Imma quit with the comments today!
propaganda and myth sold to you by the you know who
@@LaughingMan44 nice profile Pic
that's some impressive shooting!
Remember, the human eyeball is approximately 1" or 25mm.
Traffic lights are approximately the size of a human head, which is roughly 6" x 9".
Interesting little pieces of info🙃
Neat! Gonna ask my 8541 buddy if he knew this.
Testicles, also approximately 1” or 25mm 🍒
Thumbnail: Sub-MOA
Me: oh, did you watch polenar tactical video? it would be hard
Also me: oh, it's polenar tactical
in 37 years of owning and shooting the AR15 i've always noticed a unique pattern in it's shooting and i've always asked why does it and i always get funny looks. allow me to explain...
notice the pattern.
round 1 is a "cold bore flyer". always high and always right.
rounds 2 through 5 are a respectable grouping.
round 6 is a "warm bore flyer". always low and always left.
rounds 7 through 10...that's really really good overlapping and stacking.
now there is a "hot bore flyer", but those are literally all over the place. they go where they go.
Shots 1-5: Clearly missed.
Shots 6-9: Missed due to recoil (bad spray control).
Shots 10-11: Very close, but recoil and inaccuracy make these reasonable misses.
Shot 12: Likely didn't actually fire because Shooter was already dead.
Sorry I couldn't resist the urge to copypasta.
@@RavenTaleLive love it 😂
I presume you are talking about one AR that you shot for a long time?
There are so many different ARs and even a different barrel on a same setup will give completely different results. What i not included in this video are 3 rounds that i put on a target to see where it's zeroed. That didnt do much but it could be the reason that i didnt have a cold bore shot flier.
Some rifles also dont have cold bore shot fliers, especially if the werent cleaned between shootings.
Regarding the warm or hot barrel, what i noticed with my WWSD with pencil barrel is that it made the worst groups when i started shooting with a cold barrel - probably because its rapidly heating up and that makes a change. And i consistently made better groupings with it when the barrel was already too hot to touch
Good shooter. Ten rounds takes a lot of focus.
- Your eyes are all red, did you smoke?
- No, I was trying the challenge I saw online
- Damn tics and toks...
Needs more Yakety Sax.
Splendid work
thanks
How far, and how many rounds. I have two DD v7 & Pro v7 no 10 inch dd though.
Respect 🫡
Do you run any thermal or NV setups?
He moves pretty fast
He's on (high) speed
Goooood
Sweet🐸🍺🔪🔥
I’ve got a couple different AR’s and an HK MR556.
Honestly, at the end of the day it’s just shooter competency and if your tools are tuned right to make good shots. They all shoot pretty much the same, not really any different.
Chrome lined barrel??
Slowing this down by 0,25 speed to approximate the "normal" speed gives me weird 64bit vibes with that sound distortion. :D
What's that bipod?
i think it's UTG recon 360
Is there any shift before the suppressor is added
Yes, most suppressors will cause a POI shift
Guess i might need to try it with a rear bag some time.
Did this at my range (50m) as a cold start a few days ago just to see what i could get, 2 groups of 10, and smallest was 1,33 MOA with 55gr . Other one would have been 1,59 if not for a flyer making it 3 MOA......
Maybe with a rear bag i could get it closer to 1MOA with that little added stability.
Still since my rifle is besides the Mimtac trigger completely stock internal and cut down to 12, with just basic ammo i am quite pleased already knowing what it can do now. And for all general purposes it more than acurate without having to spend extra money on different kinds of ammo.
Do think a big part of that is because of the Mimtac trigger, makes it super easy to do slow shots at distance.
Better ammo and a rear ag make a big difference! But 1.3 MOA is still really good for any rife
@@PolenarTactical Was actually surprised to see how acurate i was able to shoot. And that i could do it back to back quite easily.
Was a good test to know that basic ammo is also good enough to use for general shooting (in competitions or training). Saves me quite a bit of money on getting more expensive ammo 😄.
But just for testing and curiousity, i could get some different rounds to see what the effect might be.
No safety glasses?
Is it with the standard Trigger?
Yes, standard two stage trigger but i did polish it
Ich "schmeisse" mich weg
how close to Ljubljana?
in Ljubljana
@@PolenarTactical ja imam rudniku blizu vama. 😊
@@PolenarTacticalloobeejoobee as we Americans call it
What bipod is that?
UTG recon 360
Gg
(uncut) exept for the cut right at the end. goof
lol, the most important part 😂
I actually take my phone still recording and then spend 2 minutes awkwardly trying to film the target through my LPVO - it's just too boring and you can barely see the blurry grouping so i decided it doesnt make sense. I did include that detail in our IG reel but just as a freeze frame and also that video was cut to only quick shots with the rifle to make it shorter...
"uncut" 😅
Shooting without eyepro :p
Eye protection, my friend! Don't want to see you hurt!
Shooting at paper target at 100 meters?
@@PolenarTactical they don't understand PPE came about bc of Darwin award winners. And they don't notice a right side ejection and no wall 😅
@@PolenarTactical may be he was talking about blowback gas
@pewpew192 thanks mom but let the adults handle this
@@PolenarTactical my friend was shooting at paper target at 100 meters and got hit in the eye with an AK top cover which identified as a bullet
HK 416 OU HAENEL CR223 c'est les meilleurs et dans tous, finition, robustesse, beauté, il font le café ça ne casse pas et c'est des piston.
Does nobody zero their shit? Wtf? 😂😂😂
The real challenge is getting a semi-auto that can get 1/2 MOA groupings with factory match ammo from a ransom rest.
Then to hit sub-MOA consistently from a Bipod or shooting bag.
So both the material and shooter have to be perfect.
1/2 Moa 10 shot groups from a Semi auto?
1moa 10 shot groups is already difficult..and it requires a bit of knowledge about the rifle,ammo it likes and the shooter with good fundimentals
@@Odinforever2000 It's really hard with factory ammo. I couldn't manage to pull it off until now. A guy from my shooting club gets 18mm 5-shot groupings at 100m with reloaded ammo though. It's an AR15 from Oberland Arms with 20" Lothar Walther Match Barrel, Geissele Trigger and Handguard, and a Delta Stryker HD 5-30x56 scope.
@@apexaustriae9973 very simple, make a video and we will all believe you :)
Also we intentionally went for 10 round groupings to have some statistical significance
@@Odinforever2000 nah, I've meant that one needs a 5 shot @ 1/2 moa capable semi auto to complete this challenge. Which is already fucking difficult as it is.
@@apexaustriae9973 No, you need 10 shots at less than 1 moa to do less than 1 moa at 10 shots.
Cut at 1:06
no, that was just teleportation
Fact: There is no Ziga in the video, it's Zelensky
He's training to change the course of war
Meth
Clearly the point of the challenge was to have a 30,000 dollar rifle. So invalid results
I am seeing more and more basic bitch guns get 1moa and lower.
show proof
@@PolenarTacticalThat would be an interesting one. Pull the barrel and install on a diff make upper. Is there an EU equivalent to a $329 PSA holiday special?
Hummer barrels exist. Would be interesting if you found that you had one on that rifle.
@@somebrains5431 Europe have quite lot of variations how guns and gun parts are handled.
In countries where overall amount of firearms are limited they tend to have easier acces
to different parts like barrels, complete uppers.
In here barrel, bcg and some cases even chamber recuire their own permits.
So least in here when one permit fee is 112e and douple something like 160e+ one normal price
if going for full upper=300e just application fees alone.
And because amount of firearms arent limited anyway it is much less hassle to just drop
application for complete firearm than just upper or conversion kit.
So in that sense we dont exacly have cheap holiday specials.
@@somebrains5431 hummer barrel?
I could install this barrel to my WWSD and try it, when i have time.
My WWSD with shortened pencil barrel can now do 1.3 MOA (best grouping)
@@PolenarTactical You just did.
It's great to see the Supreme Court uphold our Second Amendment rights by reining in ATF and NFA overreach.
This guy is a Slovenian shooting in Slovenia. American courts have nothing to do with it.
that's some impressive shooting!