Motul 7100 20W50 On Pulsar 135 LS 🔥 - Engine Oil Upgrade
HTML-код
- Опубликовано: 26 авг 2024
- Last year I used the Castrol Power 1 Ultimate fully synthetic engine oil on my Pulsar 135 LS. The results were a mixed bag. It needed certain amount of heat to work well and if you push it, gear shifts would get hard. Being 10W40 made it extremely sensitive to high temperatures.
This time I'm trying the Motul 7100, it's has been in the market for a long time. Primarily used on 200cc and higher motorcycles, like the KTM Duke and Pulsar RS200 / NS200. Let's see how it performs on a much smaller motorcycle.
![FNAF Into the Pit has A LOT of Unused Graphics | LOST BITS [TetraBitGaming]](http://i.ytimg.com/vi/6YhZCRdipl4/mqdefault.jpg)
Can't wait for the comparison video 🙂
Coming soon 🫡
Nice one Bro 👌👌👌
Thank you so much 👍
Good video 👍
Thanks 😊
0:34 sec is just what..... how old is that oil?
About 2 years old
Comparison video? Whennnn
Soon. Currently using the same oil on my Pulsar RS200.
How much quantity required in pulser 135 LS
1 litre for the engine. 1.2 if it's a Engine overhaul
Bhai Mera 135 model 2016 hai toh kya usme use kr skte hai ye
Yes you can! As long as the grade is the same.
Bro 20w50 is b
Ok for 135 cc as i dont have user manual 2014 model ha 😅
The manual of the 2013 model recommends 20W50. However I've heard that it changed on later models.
isnt it overkill?
I don't think so, considering the longer drain intervals
How was the performance?
So far it's good! However the 135 doesn't have a good gear box to start with.
@@butimjeremy Shall I go for 7100 20W50 then?
@@gauravgurale8896 what motorcycle do you have?
Pulsar 135ls
@@gauravgurale8896 go for it! if you have been using mineral or semi synthetic oil, I'd suggest you use an engine flush and then use the new oil.
0:34.... Looks like bad Manchurian gravy 🤣
🤣😂🤣 Damme it's actually looks like that....Can't have Chinese now
@@butimjeremy 🤣
@@dMalContent 🤣😂🤣
15w50 5100 best he pulsar me
Recommended is 10W50
0:34 ewwwwwwwww
Ahahaha replay it