Update: Brook has committed to adding a tournament mode for those concerned with desyncing the controller during tournaments. It will be a key command press (something like Hold 3P before plugging into console) that will disable the wireless mode completely. Update 2: The WFB works as a wireless pc controller without the need for a PS4 dongle. Hold down PS + Share for 3-5 seconds while your PC’s BT is set to searching to connect. Note that it’s not X-Input and may not be supported by all games.
@@jonyfraze i contacted brooks in twitter dm and they affirmed my thoughts. u MUST remove the device after every use to then put it in discovery mode for ur pc to find. its by all means not a dealbreaker, just an odd quirk.
@@jonyfraze but this is only for wireless mode. but im slowly becoming more of a fan of no wires at my desk so a 5 second setup wont hurt me in the least
Man this board is pretty freakin sweet. The fact that it shows as a legit DS4 and Switch Pro Controller too. I know what board I'm getting next! Also, thanks for doing that lag comparison, looks like the normal wireless DS4 doesn't do too bad either.
Hello, great video! I bought this board but I have a problem, I have some specific questions for you: - Do you have to have a battery connected even if you want to use it by cable? - It worked perfectly well for me with BT but now the battery seems to have run out and it won't recharge. When I connect it by cable the device comes and goes constantly, is there any way to charge it?
@@jonyfraze Thanks for answering me, if you use the Brook board without connecting the battery but with the USB cable connected, does it work without problems or do I have to have a battery connected?
@@jonyfraze I understand, then I must have some problem with the board, because I can't get it to work without a battery. Do you have any clue to help me?
Oh man this is great! I'm in the process of trying to figure out how to dual mod my Qanba crystal using this WFB. Think I have an idea but will I need a breakout board?? Judging by what I see on the wireless board, I may not need a breakout board
This board seems pretty awesome. I want it. What's the battery life? Is there a way to use a battery that's double the size for even better battery life?
Do you think this will work with brook's other ps3-ps4 converters that connect to wireless ps3-ps4 controllers? That would be cool to connect this to my DC, ps2, and neo geo wirelessly.
I can confirm that the wireless Brook board does work with the Dreamcast/ PS2,and the PC engine / Sega Genesis super converters both wired and wireless. Have not tested out the Neo Geo one yet.
@@jonyfraze right! This was an old comment. I got my Qanba LEDs to work when I had my dual modded Qanba running through the WFB to the console. I probably meant to say LEDS doesn't work in wireless mode.
Why would I buy the more expensive universal fighting board if I can buy the wireless board, get similar, if not identical features, and even use it wired?
@@jonyfraze coolio. I think I’d use a brook usb converter in my console instead. Then I’m not limited to using just one controller with the installed fighting board. Although I certainly can see using a universal fighting board in a pricey pro fightstick. I put a Brook Wingman XB in my Xbox 360 and I can use my Qanba Obsidian in PS4 mode on it. Or my 8bitdo pro2, etc.
Hey, I know this is an old video, but there isn't a lot of information on this board. Do you have to use the wiring harness that's bundled with this or can I use a Neutrik instead? I'm not planning on using this on my ps4 for audio, so that doesn't matter to me. Any info is greatly appreciated. Thanks
would this be able to go into wireless bluetooth pairing mode like the DS4? the 8bitdo and other adapters that don't have usb use it, so i'm wondering if i could do the same with this and play old systems with it
Hey Big bro. I have an 8bit N30 arcade stick that was made for Nintendo switch. I want to make it more “universal” to work with all my systems. Will this board be good for that? Also i usually build American sticks with IL/Eurosticks. The joystick in this N30 feels flimsy and cheap and i hate the 4 way gate.. Is there any Japanese joy stick that has a “perfect 360” feel, as well as very snappy similar to the american happ / IL sticks? Please help
Youd want to use the Brook UFB instead. You can always change the Gate to a Circle Gate, and add a heavier spring and Bat-top for the lever to make it feel more "American".
what if I'm outside and want to connect to a friend's switch ? are L+R enough to activate the search mode to pair it. otherwise having to plug it first can be a problem for switch.
yeah...but no, sorry, you can sync an 8bitdo controller (the old snes-like one that's been out for years), you should be able to do the same with this. (I own an UFB, it's really top notch, so I'm just very surprised this doesn't support this)
Lou Ginko By the way guys just tested - It does work. The only catch is that the controller must be in switch mode already (not PS4). Press home to wake it, then L&R.
For PC users since the board shows up as a real switch pro controller you can connect it to your PC via switch mode and it will show up as a pro controller which has full steam support for x-input. Now question is it possible to put the board in Bluetooth pairing mode while in switch mode so it can connect to PC via wireless as well. Maybe Brook can add a manual wireless pairing function with the switch mode.
jonyfraze thanks! I know the brook fighting board can switch the modes with combo key presses. But they didn’t mention that function for the wireless board. Will get one and find out I guess. Thank you so much for all the info!
jonyfraze hi, just came back to let you know how awesome this enclosure is. Sort of put mine together just now. imgur.com/a/O2o8H1F Almost broke my bank so couldn’t get any artwork. But still loving it! Thank you!
Only for ps4 games. You can navigate the menus on the ps5, but if you launch a ps5 game, it will tell you it’s incompatible. Similar to trying to use a ps4 dual shock 4 on the ps5.
Ok guys update: the WFB works as a wireless pc controller. Hold down PS + Share for 3-5 seconds while your PC’s BT is set to searching! Note that it’s not X-Input and may be supported by all games.
@@jonyfraze Thanks for the responses, greatly appreciated. Really interested to see how it fares wirelessly inside a steel/aluminum fightstick with the antenna inside. I guess I'll find out when I get one next month.
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
Update: Brook has committed to adding a tournament mode for those concerned with desyncing the controller during tournaments. It will be a key command press (something like Hold 3P before plugging into console) that will disable the wireless mode completely.
Update 2:
The WFB works as a wireless pc controller without the need for a PS4 dongle. Hold down PS + Share for 3-5 seconds while your PC’s BT is set to searching to connect. Note that it’s not X-Input and may not be supported by all games.
can you make a video of you setting it up on pc. i got it to be wireless, but to do it again i have to make my pc forget the device
I believe i had the same issue when testing for PC. I don’t use it because it didn’t show up as x-input on my setup.
@@jonyfraze i contacted brooks in twitter dm and they affirmed my thoughts. u MUST remove the device after every use to then put it in discovery mode for ur pc to find. its by all means not a dealbreaker, just an odd quirk.
@@jonyfraze but this is only for wireless mode. but im slowly becoming more of a fan of no wires at my desk so a 5 second setup wont hurt me in the least
The price is amazing compared to the universal board. I am getting this for sure. Awesome lag test as well. Good stuff my dude
i've been looking for a good fightstick content creator for YEARS. BRAVO!
Awesome review bro, I’m really excited for wireless board, been waiting since ps360 era
Man this board is pretty freakin sweet. The fact that it shows as a legit DS4 and Switch Pro Controller too. I know what board I'm getting next!
Also, thanks for doing that lag comparison, looks like the normal wireless DS4 doesn't do too bad either.
The information in here just sold me on this board. Can't wait.
Thank you for this video. With this explanation, I am not hesitating to buy this so I can get ready for the upcoming Under Night game!!
I would like to say that i don't mind this wireless PCB, but the stick itself is so dope. .holy shit
🙏🏼
jonyfraze Where did you get case from?
Thanks 4Playing I make it. It’s my BnB Fightstick. www.jonyfraze.com
@@jonyfraze Thanks. I'll check them out. 👍🏿
Good stuff G. Been rocking one of these since release and no real issues to mention aside from some weirdness when dual modding with a retro board.
Hello, great video! I bought this board but I have a problem, I have some specific questions for you:
- Do you have to have a battery connected even if you want to use it by cable?
- It worked perfectly well for me with BT but now the battery seems to have run out and it won't recharge. When I connect it by cable the device comes and goes constantly, is there any way to charge it?
You can keep the battery connected. When it’s plugged in, it should function as a USB device and charge the battery at the same time.
@@jonyfraze Thanks for answering me, if you use the Brook board without connecting the battery but with the USB cable connected, does it work without problems or do I have to have a battery connected?
@@gastongastonit will just function as a standard wired PCB
@@jonyfraze I understand, then I must have some problem with the board, because I can't get it to work without a battery. Do you have any clue to help me?
@@gastongastonI don’t work for Brook, but you should contact them instead.
If using an internal ps4 battery does a rocker switch need to be installed on the battery wire to turn the board off?
You can use the same command as a dual shock to turn it off. PS + Share for 10 seconds
is this for ps4/switch only? is that why's its cheaper than the ufb?
Yes (PS3/PC too)
Do you sell fully assembled ready to go stick? I'm not much of a dyi person.
Not normally, but it’s possible.
Were you able to wake the PS4 or switch up from rest mode in wireless mode?
Great vid!
it wakes the PS4 not the switch
jonyfraze nice! Thanks for the info 🙏🙏
Awesome video. Using it right now. What type of drill but would you recommend for drilling the hole for the wireless antennae for a BNB V2?
Standard bits will do. Protect it with masking tape 1st, then make a pilot hole with a smaller bit, and then use a 1/4” bit.
Can you speak to brook about making one for Xbox ? I know I’m late. It I’m tryna build one myself
Oh man this is great! I'm in the process of trying to figure out how to dual mod my Qanba crystal using this WFB. Think I have an idea but will I need a breakout board?? Judging by what I see on the wireless board, I may not need a breakout board
This board seems pretty awesome. I want it.
What's the battery life? Is there a way to use a battery that's double the size for even better battery life?
Yeah just needs the proper JST connector
Is the audio headphone functionality available only on PS3/4 and/or Switch? or does it work for PC as well?
PS4 only wireless, wired on pc
Do you think this will work with brook's other ps3-ps4 converters that connect to wireless ps3-ps4 controllers?
That would be cool to connect this to my DC, ps2, and neo geo wirelessly.
I believe it should work
I can confirm that the wireless Brook board does work with the Dreamcast/ PS2,and the PC engine / Sega Genesis super converters both wired and wireless. Have not tested out the Neo Geo one yet.
Do you think that wireless fightsticks are going to replace wired in the consumer market?
i doubt it. but having both options are nice.
I don't think LEDs will work because the WFB don't kick out 5v at the moment
Works when plugged in, the vcc port loses power when on wireless mode
@@jonyfraze right! This was an old comment. I got my Qanba LEDs to work when I had my dual modded Qanba running through the WFB to the console. I probably meant to say LEDS doesn't work in wireless mode.
Why would I buy the more expensive universal fighting board if I can buy the wireless board, get similar, if not identical features, and even use it wired?
UFB supports Xbox systems, and some of the mini consoles. Also its the faster board Brook makes if you care about input delay performance.
@@jonyfraze coolio. I think I’d use a brook usb converter in my console instead. Then I’m not limited to using just one controller with the installed fighting board. Although I certainly can see using a universal fighting board in a pricey pro fightstick.
I put a Brook Wingman XB in my Xbox 360 and I can use my Qanba Obsidian in PS4 mode on it. Or my 8bitdo pro2, etc.
hi bro.. i wonder how to wiring for LED button, i see the manual doesnt shows anything on how to do wiring for LED
Ground, signal as usual and power must be connected to vcc or 5v
@@jonyfraze thansk bro
jony, do you think it was slower than your ds4 (latency) because your ds4 padhack was in an enclosure and your brook has an external antenna?
Can’t rule that out but I was about 1 meter from the PS4
Hay can you recommend me a way to light up my sanwa buttons ? I’ve been out of the loop and am not sure if they have easier methods
ruclips.net/video/SB7nAX-JQto/видео.html
@@jonyfraze I mean for the buttons themselves
Look up the Kaimana from paradise arcade shop
@@jonyfraze yeah I already found and ordered it a week ago my brother thanks 🙏
Hey, I know this is an old video, but there isn't a lot of information on this board. Do you have to use the wiring harness that's bundled with this or can I use a Neutrik instead? I'm not planning on using this on my ps4 for audio, so that doesn't matter to me. Any info is greatly appreciated. Thanks
Yeah just use the usb b to neutrik like you would any other board.
@@jonyfraze thanks. I didn't know if that was just for power. Appreciate the reply.
I have this board in my joystick what do it do to make it work on PS5?
At the moment there’s no option for the wireless board.
I thought your experiment was scientific enough to make a clear choice, GJ Johnny.
I don't think you needed to take it any further
TY
would this be able to go into wireless bluetooth pairing mode like the DS4? the 8bitdo and other adapters that don't have usb use it, so i'm wondering if i could do the same with this and play old systems with it
Yes - see my pinned comment
Hey Big bro. I have an 8bit N30 arcade stick that was made for Nintendo switch. I want to make it more “universal” to work with all my systems. Will this board be good for that? Also i usually build American sticks with IL/Eurosticks. The joystick in this N30 feels flimsy and cheap and i hate the 4 way gate.. Is there any Japanese joy stick that has a “perfect 360” feel, as well as very snappy similar to the american happ / IL sticks? Please help
Youd want to use the Brook UFB instead. You can always change the Gate to a Circle Gate, and add a heavier spring and Bat-top for the lever to make it feel more "American".
Why wouldn’t I get the wireless UFB? I want it to be wireless. Regular UFB wouldn’t be wireless would it?
No such thing as a wireless UFB at the moment
Does the wired connection work with 360/XB1?
No you need the brook universal fighting board for that
I'm gonna try to install it to my madcatz te2 stick.
I'm going to do the same but with Jasen's Customs TE2 EZ Mod. Should be sweet. :)
When i unplug the USB from my switch and press guide to turn it on it goes right back and connects to my ps4 :(
what if I'm outside and want to connect to a friend's switch ? are L+R enough to activate the search mode to pair it. otherwise having to plug it first can be a problem for switch.
You may have to bring your cable at least for the first pairing.
@@jonyfraze so a type B to type C cable ?
yeah that doesn't exist... and really is a deal breaker and oversight for me at least :\
sHiNkAoLaSu just use this along with your usb cable www.amazon.com/dp/B07PTX7TF1/ref=cm_sw_r_sms_awdb_t1_aVzxDbYP8BY2K
yeah...but no, sorry, you can sync an 8bitdo controller (the old snes-like one that's been out for years), you should be able to do the same with this. (I own an UFB, it's really top notch, so I'm just very surprised this doesn't support this)
Lou Ginko By the way guys just tested - It does work. The only catch is that the controller must be in switch mode already (not PS4). Press home to wake it, then L&R.
For PC users since the board shows up as a real switch pro controller you can connect it to your PC via switch mode and it will show up as a pro controller which has full steam support for x-input. Now question is it possible to put the board in Bluetooth pairing mode while in switch mode so it can connect to PC via wireless as well. Maybe Brook can add a manual wireless pairing function with the switch mode.
It’s now possible see my pinned comment..
Great video and summary, sold and subscribed.
How easy would it be to put this in say, a Panthera Evo? My main concern would be the slide switches on the top, for stick selection and the lock.
Gonna be a little tough since you need to rewire the panel buttons to the WFB
I cannot get this to turn on my PS4. Is there something additional I need to do?
Hold down 2P while plugging in
if im building a case from wood can i keep the antenna inside the case.
Wood is too dense. I would mount the antenna outside
@@jonyfraze thanks
Hi, would you mind telling me where you got that arcade stick case? Gonna try to build one for my Switch. Thanks in advance!
I designed this case. It’s called the BnB. Available on focusattack.com
@@jonyfraze Thanks! I hope you don't mind me asking another question. Do you know what switch to use for the LS/DP/RS toggle? Or is it unnecessary?
AceCooper you can use a 3 way switch.
jonyfraze thanks! I know the brook fighting board can switch the modes with combo key presses. But they didn’t mention that function for the wireless board. Will get one and find out I guess. Thank you so much for all the info!
jonyfraze hi, just came back to let you know how awesome this enclosure is. Sort of put mine together just now.
imgur.com/a/O2o8H1F
Almost broke my bank so couldn’t get any artwork. But still loving it! Thank you!
This fits all consoles right? I have enough spare parts for another stick
I kept watching the video and answered my own question lolz
The UFB has been out for ages lol
Hey what kind of tripod do you use for your overhead shots?
There’s a shelf above my monitor that I clipped a “smarttree” WebCam Mount
@@jonyfraze thank you
Another question: can this work on the PC using bluetooth and connected?
Edit: saw that it works connected. Bluetooth?
Just got word that it works with the PS4 wireless adapter for PC.
Works without the PS4 dongle. See my pinned comment.
Yeah ive been waiting for this
Does this work with kamina button LEDs ?
it should work however the 5V/VCC on the screw terminal cuts off in battery mode.
Amazing video bro
What about xbox ?
can the Brook Board emulate the stick ? or only Dpad ?
yes. i believe holding start + L = LS, start + R = RS, start + Up = Dpad.
What’s the arcade stick you have?
focusattack.com/fightsticks-pads/popular-brands/bnb-fightstick/
Subbed. Thanks
Amigo compartame las medidas de tu jostick esta hermoso..
focusattack.com/fightsticks-pads/popular-brands/bnb-fightstick/
will this work with the xbox series x?
No use the brook universal board for that
@@jonyfraze thank you very much for your reply
Will this work for PS5?
Only for ps4 games. You can navigate the menus on the ps5, but if you launch a ps5 game, it will tell you it’s incompatible. Similar to trying to use a ps4 dual shock 4 on the ps5.
Where can I buy this box?
The arcade stick? He sells it on his website, jonyfraze.com
where you get that case
I make it. It’s called the BnB - www.jonyfraze.com. Soon to be available from FocusAttack.com
@@jonyfraze nice, looks amazing
www.focusattack.com/brook-ps3-ps4-switch-wireless-fight-board/ pre-order is live at FA
not bad! and how much!
$70 USD
Very very informative Jesus Christ I’m sold lol I might have to open up my b15sdm to do this
Fire
Someone brought up wireless sync mode on the discord
Ok guys update: the WFB works as a wireless pc controller. Hold down PS + Share for 3-5 seconds while your PC’s BT is set to searching! Note that it’s not X-Input and may be supported by all games.
Does it work with PC?
Wired for now. Not sure if it works with the PS4 wireless adapter
@@jonyfraze Thanks. Does it show up as an X-Input device (360/XB1) or a D-Input (PS4)?
Xinput
@@jonyfraze Thanks for the responses, greatly appreciated. Really interested to see how it fares wirelessly inside a steel/aluminum fightstick with the antenna inside. I guess I'll find out when I get one next month.
Jack Davis confirmed with brook it works with the PS4 pc dongle
nice
Call me old fashion... but I stick with my WIRED joystick !
Word same here but this can do both..
ah... ok . so why not.....