rb25det GReddy Intake Install: How I prepped the Manifold
HTML-код
- Опубликовано: 29 авг 2024
- After Removing the Stock rb25det Intake manifold. This video is show how i prepped the Manifold, for the rb25det GReddy style Intake Install. Another DIY MCM style. for the A31 RB25DET.
Another Step Closer to our Intake Upgrade! Hope this video will be great help to those who would like to do their Intake Manifold Upgrade on their rb25det.
If you want to see how to remove stock intake manifold.
• I Finally Did It! - rb...
Make Sure you Subscribe so you don't miss out on our future videos.
#RB25det
#IntakeManifoldPrep
#GReddy
#FReddy
Thank you finally someone actually showing how to fit thing back on so you can see where everything goes
Thanks for watching the video.
@@22mon78 no thank you been wanting to do this to my r33 for years but hadn’t found a video on it until yours 👍👍👍👍
Very nice, i wish this was out last year when i did mine! 😂
thanks bro. please subscribe and click the notification button. will be making more videos related to this project.
thanks for the Sub!
What is that clear liquid you paint on the injectors and lines?
If i had to guess, possibly some kind of concentrated brake cleaner or rubbing alcohol to clean it.
Great work. Do you use gasket maker for when you put everything from the old intake to the new greddy one?
Yes! was Using gasket maker. i may have missed taking a good video angle showing the gasket maker or bad cut on edit. :)
22MonFactory no worries
ask ko lang po kung magkano ngayong ang bentahan ng a31
Depende yan bro, kung saan location mo. pa chambahan meron minsan less than 100k stock, minsan naka makina na with issues. lang.. abangers lang ;). wag kalimutan mag subscribe para kita mo agad bagong vids nang channel natin :) thanks
Do you have a link for where you bought your Greddy Style Plenum/Manifold?
Hi angelo, i bought it from a local shop. You should be able to source locally from your area. If not, there's a lot of listing on ebay. Thanks for watching the video and thanks for the support. :)
@@22mon78 thank you so much brother! KEEP POSTING MORE GREAT CONTENT!
hey what is the black paste you put on and where do you put it? also the stuff you use on the O rings? cheers
black paste is actually a rtv silicone gasket maker, wherever there's a gasket i put a bit of rtv. The stuff i applied on he O rings are just petroleum jelly light coat just to lubricate it so it goes into the slot easy ;)
What did you use to hold the connector for the water jacket in place?
All threaded parts have teflon before installed any part thats mated together have a gasket and RTV. The Hose fitting from the plenum where radiator hose connects, was coated with jb weld/Epoxy before it was inserted into the plenum.
@@22mon78 thanks for the reply mate. Has it held well so far with no problems?
@@vtsrobbo im still finishing up intercooler pipings. im hoping it will hold fine ones im driving it around. will update on future videos.
@@22mon78 I'm interested to see! I'm doing the same next week as my winter project so I'll see how it goes
Did u had issues with runners alignment? Or everything lined up great?
it did line up. but you just have to double check mating surface for flatness, to make sure its sealing evenly.
What thread size were those brass fitting
If i remember correctly those are 1/4 cant recall if bsp or npt.
It works with stock ecu ?
should work. im using stock injectors, stock throttle body etc. just the plenum has been changed. we experienced some idling issues with other mates rb25det who changed to front facing manifold and with an upgraded 65mm throttle body.
Was i the only one that noticed it not ready because he only finger tight everything?
You're the one with the eagle eye! But yes we have to make sure it's tightened properly.
fat fingers✌! good job tito mon😆
shhh. thats what the gloves are for lols!
please say millimeter .....
Alrigthy, :) will make sure i do on the future videos. Thanks for wathching the video. :)