I tried doing this. but the numbers only got up to 34, and I kept tightening the tension knobs and it still wouldn't get past 34. What am I doing wrong???
@@MadeiraUSA What about corresponding bobbin thread? You said that your top and bobbin thead need to work together. If you're using a magnetic and it's set at around 22, would you still set the top at 170 for the Poly 40?
I tried doing this. but the numbers only got up to 34, and I kept tightening the tension knobs and it still wouldn't get past 34. What am I doing wrong???
In the directions it says wrap the thread around the holding pin two to three times
How to know which tension is best for which thread?
What is the optimal thread tension for polyneon?
170
Am I supposed to turn the knobs at the top of the machine near the thread holder or the knobs in the middle that you turn the thread 1.5 times around?
Do you thread the needle when measuring the Top Tension?
Yes you do! Through the needle and the presser foot.
What is optimal top tension when using polyester 40wt thread?
Poly 40 should read 170!
@@MadeiraUSA Thank you
@@MadeiraUSA What about corresponding bobbin thread? You said that your top and bobbin thead need to work together. If you're using a magnetic and it's set at around 22, would you still set the top at 170 for the Poly 40?
@@breakingitdown4you422
i have the same question.
@@marekmichalczyk7720 typically you set it 1:5 ratios. So if you do 170 on top, divide that by 5 and you'll get 34.
How to order ?
Hi there! Find the Digital Tension Gauge and its accessories here: t.ly/QmV2