Between you and Romero Threads, you both have the best detailed content when it comes to operating and maintaining the machine. I don’t have the same machine, but you broke it down so that anyone could follow. Thanks for the video because now machine needs to be tuned again.
I met you at Deco Summit and you gave me tips on tension. This is what I struggle with as I am new to embroidery. You are a great teacher! Now that I’m watching you I’m understanding it! I could cry because now that I’m watching this it makes more sense. Thank you!!!
Thank you finally someone answered my question about which adjustment was coarse and which was fine. This will clean up my work. Even though I have a TC 1501
Thank you so much I have learned so much about this tension. I just got my Ricoma 1501 TC had a few issues with loose top thread and now I think I can make the minor adjustment to solve it Please keep it up with the great content. Thanks again
Thank you very much! I have an EM-1010 for 2years, and you teach super. I learned something today. I’m not an expert on my Ricoma jet, but I’m continuing watching you to learn more 🙋🏻♀️
i havent got my machine yet but you are showing me quite alot off very helpful information, yes this is very different from my industrial sewing machines but in some ways similar with the tensions
Thanks so much for your information. Sometime I struggle with that on my RICOMA. I appreciate your information Keep Grinding I have Journeyed with you before you opened up your shop. SO PROUD and thanks again for all your GEMS you drop!!!!! Keep INSPIRING
Wow I am been an embroidery sewer for 25 years..I learn one trick from you by doing hats. Ricoma emb. machine looks very complicated for threading and adjusting the tensions. Maybe you like it. Barudan is use friendly for threading. Both machines sewing are equal good quality.
on my tension test, similar to what i'm seeing at 12:38, as you can see the two colors on each side with white in the middle, my color on the right is a tad bit thicker and left is a tad bit thinner than shown in this vid. why aren't both sides of color even or the same thickness?
Having problems with my TC-1501 about a week ago it jamed breaking the needle and I couldn’t place the machine back on 100. Since then I got it running again but now every couple of stitches it’s stopped alerting it of a thread break frustrated . I’ve played with the upper tension nothing I do confused I had to look up videos . tension is too lose or too tight either way I feel like I can’t do anything to help the machine to run like before the jam . Reached out to Ricoma they just keep sending videos on tension but I’m lost and don’t have a clue of which way to go . Found your video hope this helps . Thank you.
Loved how you explained this and I just learned something new about the plastic things on the thread spools and what they sit on didn’t know they could be removed so happy I watched your video.
I have a question, I was able to set all my tension correctly. However, I had to use a 60 weight thread on the small lettering on a left chest logo and the tread keeps coming out of the needle. Whether I loosen it or tighten the knobs it comes out. Any suggestions?
Any reason it says no needle error on Ricoma MT-1501. A person on Facebook explained to move red knob on side of machine until a number appears. I did turn on the machine, and it just acts like the needle moves, but the needle stays in place, not threading. Thank you in advance
What if the back is mostly white but wave white bobbin . I can’t get the straight clean line in the back. It’s a wave. Can’t find anyone with this issue. I have a brother pe1900.
HI! I'm strting follow you!, I have 1501 mt and the needle #14 I can't make sew, and probably 15 too, ( I brought the machine used, and i'm newbie, probably for that reason they saled), Thank an advanced if you help me!!
![Affinity Designer 2: Tutorial for Beginners [2024]](http://i.ytimg.com/vi/8y5CDmJSt8g/mqdefault.jpg)
Wow,this is probably the best video I’ve ever watched on RUclips, the camera angle is just perfect, I mean perfect, thank you so so much
Between you and Romero Threads, you both have the best detailed content when it comes to operating and maintaining the machine. I don’t have the same machine, but you broke it down so that anyone could follow. Thanks for the video because now machine needs to be tuned again.
Which machine you have
@@dawnchaney3251 Tajima TMBR-1801
I met you at Deco Summit and you gave me tips on tension. This is what I struggle with as I am new to embroidery. You are a great teacher! Now that I’m watching you I’m understanding it! I could cry because now that I’m watching this it makes more sense. Thank you!!!
Thank you so much for watching. Im glad the video helped. Also glad to meet you..
Incredibly helpful video. I have the Ricoma 10 needle and this tutorial was very informative. I will be saving this video. Thank you!!
Thank you finally someone answered my question about which adjustment was coarse and which was fine. This will clean up my work. Even though I have a TC 1501
Thank you so much I have learned so much about this tension. I just got my Ricoma 1501 TC had a few issues with loose top thread and now I think I can make the minor adjustment to solve it Please keep it up with the great content. Thanks again
Thank you very much! I have an EM-1010 for 2years, and you teach super. I learned something today. I’m not an expert on my Ricoma jet, but I’m continuing watching you to learn more 🙋🏻♀️
Thanks for watching. Glad you learned something in this video. Make sure you clicked the bell to be notified when I put out new videos.
This video was so helpful very detailed. Thanks Joe. You made this just in time for me.
Absolute BEST tension video on RUclips!! Congrats bro!
i havent got my machine yet but you are showing me quite alot off very helpful information, yes this is very different from my industrial sewing machines but in some ways similar with the tensions
I have a EM 1010 and this is my first Embroidery machine and I don’t know how to run a eye test on it ! Thank you joe
Thanks so much for your information. Sometime I struggle with that on my RICOMA. I appreciate your information Keep Grinding I have Journeyed with you before you opened up your shop. SO PROUD and thanks again for all your GEMS you drop!!!!! Keep INSPIRING
The little plastic things under the thread that you take off is to hold large thread spools that have large inside holes in place.
This was such a great video, I'm so happy that I found it. You did such a great job at explaining everything thank you
Glad it was helpful! Make sure to subscribe and lick bell to be notified when I put out more videos.
Thank you, thank you, thank you. Best video ever. I followed your instructions and my embroidery is 100% better.
Awesome!!! So glad this video helped you.
Wow I am been an embroidery sewer for 25 years..I learn one trick from you by doing hats. Ricoma emb. machine looks very complicated for threading and adjusting the tensions. Maybe you like it. Barudan is use friendly for threading. Both machines sewing are equal good quality.
Richpeace is very good
Above both
Man this helped me out so much! Just got the MT 1501 and can't wait to make some awesome apparel with it.
Great video Joe. As usual, your videos are so detailed and helpful.
cAN YOU MAKE A VIDEO TESION ON EM 1010 RICOMA, BECAUSE i LOVE HOW CLEAR AND DEMOSTRATION YOUR VIDEOS....
I dont have the EM1010 but it I come across one I sure will.
on my tension test, similar to what i'm seeing at 12:38, as you can see the two colors on each side with white in the middle, my color on the right is a tad bit thicker and left is a tad bit thinner than shown in this vid. why aren't both sides of color even or the same thickness?
So incredibly helpful. You’ve earned a new sub - and I rarely subscribe to channels! Thank you!
Having problems with my TC-1501 about a week ago it jamed breaking the needle and I couldn’t place the machine back on 100. Since then I got it running again but now every couple of stitches it’s stopped alerting it of a thread break frustrated . I’ve played with the upper tension nothing I do confused I had to look up videos . tension is too lose or too tight either way I feel like I can’t do anything to help the machine to run like before the jam . Reached out to Ricoma they just keep sending videos on tension but I’m lost and don’t have a clue of which way to go . Found your video hope this helps . Thank you.
Thank you for sharing your knowledge this was a great help
This was such a helpful video! Thank you! You truly helped me with correcting my tension issue 🙌🏽
Hey Joe its been a while
Thank you for this video it was much needed. What a beautiful 😍 helper
Yes it has been. I jave been so busy in the shop. Im trying to get back into videos.
Best video I have found on this subject. GJ
THE KING 👑 OF EMBROIDERY! This is a great video 🔥
HAHAHA
Thank you! This is incredibly helpful!
Thanks man I learned a total life hacks 👏👏
I need help with my tensions
if you still having issues, we can setup a 1hr session. There is a fee of $97.00 per hr. If intrested email us at Orders@heartandhustleprinting.com
@@HeartHustlePrinting ok thanks I will email u
Liked and subbed. Awesome attention to detail.
lol when she started the machine 😂😂
Great Video thank you
Joe, The next generation already knows how to keep pressing. Buttons that is.
Its good to see that you're still doing videos . No one breaks it down quite like you do. Thanks for taking the time to share your knowledge. 🙂👍
Thanks Charles.. Im trying lol shop has me tied up all the time..
Loved how you explained this and I just learned something new about the plastic things on the thread spools and what they sit on didn’t know they could be removed so happy I watched your video.
Great video.. I have a TC 1501 and never knew I needed to make one round turn around the wheel when threading the machine. Does this help the tension?
Thanks for watching!! Yes, it makes a difference.
@@HeartHustlePrinting ok kool I will try this asap!
how do you get your bobbin thread in the middle? mine is of to one side?
Extemely helpful - thank you!
I have a question, I was able to set all my tension correctly. However, I had to use a 60 weight thread on the small lettering on a left chest logo and the tread keeps coming out of the needle. Whether I loosen it or tighten the knobs it comes out. Any suggestions?
those post things are for thread that is short & fits over the white thing'
Yeah i have since started using Robinson Anton thread and the work prefectly
Very good video new subscriber 👍
Excellent tutorial!!!
Thanks for watching!!
Good work. Interested in your videos
Any reason it says no needle error on Ricoma MT-1501. A person on Facebook explained to move red knob on side of machine until a number appears. I did turn on the machine, and it just acts like the needle moves, but the needle stays in place, not threading. Thank you in advance
Yeah if it says no needle. You need to turn the know till is says what neelde you on. Send me a image on Instagram @heartandhustleprinting
How do you get to the tension screen on the machine ?
Good video joe thanks
What if the back is mostly white but wave white bobbin . I can’t get the straight clean line in the back. It’s a wave. Can’t find anyone with this issue. I have a brother pe1900.
Can you send me the dst file for the I-test
Amazing!🌟👌🏼🙏🏼👍🏼
Cutter option stop video
See if this is what you are asking.
ruclips.net/video/3dKTSYMXLxA/видео.htmlsi=wzqbk-iS1kzruwU1
HI! I'm strting follow you!, I have 1501 mt and the needle #14 I can't make sew, and probably 15 too, ( I brought the machine used, and i'm newbie, probably for that reason they saled), Thank an advanced if you help me!!
This is a tough one bc you don't know what they did to those tow needles to keep it from working.
If thread snaps do I loosen the top tension?
Yes. Its then to tight
I’m doing caps , what material can I use to run test ?
An old cap. You can run a trst on something flat but you wong get the same outcome on a hat
Among us