Pajero Parker LED upgrade plus interior LED light options - how to
HTML-код
- Опубликовано: 21 окт 2024
- Hi all in todays video we cover off how to change your parkers and interior lights over to LED.
We'll talk about a few options , all available from ebay and show you what type of globe goes where, plus show you how to swap them out and which globes to definitely avoid.
the T10 globes here
ebay.us/aGOEMX
Good clip Brett, I love the LEDs in my trucks. Cheers Steve
the odd colour of the parkers has bothered me for a while now, so when they died it was actually better. I decided I needed to something about it at some point.
@@DENMONKEY Yeah same here I had to change mine coz they look stupid being soooo yellow.
Awesome mate, just ordered both types. I'll let you know in the future my experience with them. Thanks for the video. Cheers, Marty.
Beaudy, thanks Marty
hey mate what are the other globes you are using in the headlights?
low beam and high beam ?
these ones ruclips.net/video/KWsfW1EQ7bo/видео.html
Great i found this vid. I was about to buy those crap ones
Where can I find the low and high beam bulbs you are using?
ruclips.net/video/KWsfW1EQ7bo/видео.html
top stuff Brett!! love your vids mate, they are always helpful.
I just fit a Redarc Brake controller to my MY20 GLS Paj, used the Mitsi supplied redarc and the factory loom for it so was pretty much plug and play once you get the rear trim off etc, it was a pretty easy job and worked a treat the last 6 days when I went up the Murray with the camper.
Only thing I wish Mitsubishi did was with the factory tow kit they should put a 12 pin plug rather than a 7.
Anyway have a good Australia day holiday mate!
Hey Da, thanks for the awesome comment mate. I fitted a controller but didn't use the factory harness. Would have made thing easier I think but I didn't have one, so made do. Enjoy the break mate. Hope there was some water in there for ya. Happy aus day.
Eres un crack ,
Saludos desde España
gracias por ver desde españa
Thanks ! How about the lights on the side mirror? Do you know how to replace it?
Hey Chris, I don't have any on my pov pack nt, so I have no idea what they are.
Side mirror are T10, u have u pull out the mirror, behind it.
Hello Brett, thanks for this great video, i learned a lot 🙂
Could you please help me with this; i would like to change the original red appearence from the center computer ( with temperature, range, clock, etc) into blue. Some Pajeros have it in red and some in blue.
Also the Climate control should be in blue too insteat of red.
Thanks in advance for your help, Alain from Belgium
Thanks mate, I bought some and are great so far. Cheers
hey Ricky, how much better are they then the old halogens :) I wish I hadn't done mine, just so I could do it for the first time again and be amazed how good they are
DENMONKEY they are so much better. They even make the parkers look like there is more than one globe, like a crystal effect.
I replaced the headlights with the LEDs and wow they are great. Did the parkers too. Any idea where I can get a kit of the festoon LEDs? Would need a 10 pack to do all the door and interior lights? And no more than 12 per panel yeah? Don't need spaceship brightness!
Hey Phil, yes I think anything bigger than the 12 were to big. I just got mine off ebay. I do have a supplier sending me a full set that will do the whole vehicle inside and out. It's still a few weeks away but eclectic are high based on our interactions this far. Watch this space I guess.
Hey I can't seem to find the 12 led festoon kits?
Hey mate, had any issues with the Auxito bulbs yet? Cheers
Mate, not a single one that I fitted. I'll be buying more.
Bit late to the party here. Any ideas how to change the light underneath the mirror which illuminates the ground by the door?
Hey Linc, no idea mate sorry. This one has come up a few times but my original mirrors didn't have them and so I can't offer any advice
Choice vids champ, I just ordered some T20 LED's for reverse lights and a pair of Nighteye H11 headlight LED's, just want to confirm that you fitted the Nighteye's in the Low beam fitting?? Also did you fit the same LED's in the high beam fitting
Cheers Ant
Hey Ant, yeah mate stuck them into the low beam but they also fit into the high beam. So you can just get 2 of the same. Right now I have some auxbeams in the high beams. they were sent to me for review but weren't much good. so the review didn't happen. I only like to review stuff or share things that Im impressed with. One of my nighteyes started to flicker a week or so ago but has since sorted itself. I think it may have got dirt in it or something. Since I was so happy with them for the price I got straight on ebay and ordered a 2nd set. So I have them sitting there ready to go. So might swap them into the highs when i think of it.
Great vids Brett especially the Super Select vs traction control one, so good to see those comparisons.
Anyway, I want to change the door and mirror globes for a trip coming up as these are the only ones that don't turn off if you switch the master near the rear vision mirror. Sorry I didn't get which globes you were saying (the less bright ones I was looking for) were the best, you said T10s and your link takes me to 10x AUXITO T10 W5W LED Wedge Interior Number Plate Light Globe 6000K Error Free which look like they are the right thing but different to what you showed on the vid - these are independent little globes - are these the newer type to get? Or are these the ones you were saying fall apart. Thanks mate.
No worries John, thanks for the compliment mate. The 2nd link is the t10s I recommend(AUXITO). The ones I put in in this video which are the same ones you see in the top right hand corner of the image for this video, are still all working. I also placed them into another vehicles parkers. I've yet to have one fail . The other ones that failed were ones that my mate gave me and look more like a conventional bulb(kinda) where the good ones like like they are flat. hope that all makes sense
@@DENMONKEY Thanks Brett, OK its not that much to give them a go. Thanks so much for what you do. I was googling how to turn off all Pajero lights when camping because all except 6 (4 doors and 2 side mirror) are off with the master switch. Weird Mitsubishi wouldn't make the master switch off ALL interior lights but anyway you have given me a way to least drastically cut the usage with 6 x LEDs and make it less likely I will drain the battery in the middle of no where.
T10 g
led globes. were the ones you fitted in Jan 2020 ok as you were going to test them?
Yes mate. Still going good
I am interested in doing this upgrade. Are you happy with the T10 s you have shown and have you been able to obtain led globes for the tail light cluster as you had one that failed.
Hey Brenton, Yes mate. absolutely, those T10s are still going strong and I'm surprised actually considering how quickly the others broke down. I've got them in 2 cars and all are still working. Thanks for reminding me though, I should order another set just to stick in the spare for later. I just went back to the original globes at the back and haven't gotten any further with them
how have they gone mate? any issues with your radio gear? i have had a hell of a time finding a LED that doesnt cause bulk hash with my HF radio(s). Part of the reason i went away from LED in the headlights / parker (HID spotties still blow it to bits :/ )
Good question, I haven't had them running with the hf on. No issues on am radio or 2m70cm but I shall check it out and report back. The fridge over the back is what kills the hf. I'm yet to find a 4wd fridge that is hf friendly.
Hey Brett - any idea on how to change the puddle lights in the mirror ?
Hey gersh, none mate I'm afraid. I don't have them on my poverty pack nt 😞
Did you manage to work this out doing a change out now on the NT Platinum
Hey Brett me again. DO you know the size name for the little mini globe in the glovebox? Its about 16mm long and about 5mm wide. Of all the bulbs that needs to be bright it's this one. Can't see what LED light would suit.
Also for everyone else, I found when removing the bottom door bulbs, perhaps because they are naturally on when you access and remove them, I blew a fuse. It was an obscure 15amp fuse and when blown you lose the navigation system, rear camera, radio and other important stuff. After a lot of frustration I found the fuse in the engine bay fuse holder (2013 Pajero) which is within a separate yellow plastic holder that has a 15 amp and 10 amp fuse. I had to lift this up (but not off) so it stays in place but lifts up to a notch using piers gently held on 2 sides of this holder. This effectively lifts up and disconnects the fuses within the holder and then you can easily replace. The 15amp fuse was blown the only spare I didn't have so had to race off to Supercheap. So if I am changing these bulbs again in the doors I would lift this yellow holder holder up to disengage the fuses first within so no fuse will be blown. If you don't want to bother doing this, I would just make sure you have a spare 15amp fuse. Hope it helps someone.
Hey John, I can say I do. I know you have to remove the wiring for it when you drop the give box. I didn't pay too much attention but I remember thinking it was going to be a tough one to replace but I haven't taken it from it's housing to look closer I'm afraid. Yes good lesson on the site bulbs. I do remember having to grab them with pliers because the originals were so busy hot. Didn't do any fuses though.
@@DENMONKEY Actually glovebox comes out easily to gain access and after the little cover which is near impossible to work out, the bulb is just sitting there. No wiring to remove. So confess I broke the little cover to get at the bulb but really that cover is not doing much as the bulb is hidden anyway and pretty dim. Then the bulb comes out with gentle pliers pressure. If I could upload a photo I would. I will take it to Jaycar or Repco and see if they have something and let you know.
I think we're talking about the same globe. When you pull the glove box out you need to remove the housing with the globe and the wiring that runs toward the middle of the car. It just unclips. Handy tip though, it comes on with the head lights. So it's a good wire to jumper to make your stereo head unit dim when the lights are turned on 😉
So the LED for the glovebox is a T5 you can get from Jaycar for about $3. When I said the glovebox comes away easily well really it it drops out of the way but is still connected. But there is a lug that hooks onto a soft close plunger and it's easy to break that away :( . My advice, forget the LED in the glovebox you have to be extra silly to leave it on so it's low risk if the goal is to reduce the risk of a flat starter battery when camping which was my reason to do all this.
Thx for the info, Where did U get those sunnies from?
supercheap :)
can you please show the side mirror apart. As I need to replace the puddle lights on a nw platinum model...
will try and get to this for you in the next few weeks
Hey DenMonkey do you have LED high beam globes in your Paj if so what make and size .thanks
these ones in both Pat ruclips.net/video/KWsfW1EQ7bo/видео.html they fit both
@@DENMONKEY cheers champion you hadn't said if you put them in as a high beam as well .Anyway i put them in last week ,love em great white light . keep up the good work
I've found the same issue, led in park light and number plate lights never last more than 2 weeks, Like to know how long these LED can last.
I'll keep you posted Kel. I've stuck these in 2 vehicles now, so have a good test case going. If I dont mention them in future videos, it means theyre still working
How are they mate? 6 months on are they still working? I just bought these same ones and waiting for them to arrive. I have tried Auxito before but they didn’t last 2 weeks. They actually burnt-out. I’m hoping 3 years later they would have improved. Good video mate, thank you!
wow ok., It's been 6 months already. I didn't realise. Yes went out and checked. working still in both cars. not like the other shit things I had in there.
DENMONKEY you rippa, thanks for the reply. I'm glad they're still working in your car. Due to your postive experience I can't wait to try them out. Cheers Pal...!!!
@@BoondyIsOn hey mate I've had mine in for around 8months in Mr Triton
Can't fault them changed all the lights in the car with them
@Some One that's good to hear mate.
Sounds like Auxito have improved. I've had mine in for a week's now and so far so good.
Thanks mate I might give them a go. The old T10's you had look like the ones I tried, they were rubbish!
Hi Kieran, got that right, they fell apart in no time. When I checked to see why they werent working I was shocked when they fell apart in my hand. good ol china specials
@@DENMONKEY received mine today and changed over the Parkers, door lights and the rear number plate lights. My hallogens in the doors weren't easy to get out, managed to get them out by using some newspaper between my fingers and the bulbs otherwise found it too slippery. Might be due to the humidity but I could never get a good grip on the bulb with my bare fingers.
The first link to the kit is not working. Which once are those again?
try this, it works for me www.ebay.com.au/itm/10x-AUXITO-T10-W5W-LED-Wedge-Interior-Number-Plate-Light-Globe-6000K-Error-Free/372800249018?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353
I can't get the bloody t10 halogen globes out of the door socket 😂 what's the secret?
Geez it has been a long time. I think I pulled them with a set of needle nose pliers. I might have even broken both globes in the process of pulling them out too if I remember right
@@DENMONKEY lol, I finally got them out after disconnecting the battery and yanking them 😂
Brett? Anybody home?