Pajero removing rear door trim and running wire to wheel carrier
HTML-код
- Опубликовано: 9 сен 2024
- Hi all,
heres another quick video response to viewer questions.
this one covers off how to remove the rear door lower trim and how to run wire from inside the cab out to the rear wheel carrier.
Thanks for your videos. I've learned two things so far, how to adjust the door catch and also that the bottle on the left side is a water bottle for the back wiper. Thanks again
welcome Dale. happy to help :)
Thanks mate a great help followed your instructions it worked a treat. Had trouble opening the back door got it open to clean up the dust. Thanks for your help
Just a quick by the by I finally received those solar screens you have. Absolutely brilliant. Excellent quality and fit like a glove. I highly recommend them too! Thanks for the tip. Cheers
Excellent. Thanks for taking the time Dave
Thanks Den for all your videos, I own a Gen 4 pajero here in Kuwait , and worked on damping my all 4 doors, next would love to see if ur interested in removing the entire dashboard unit, as it will help a lot of us to clean the Ac filter beneath - there's so much this lovely SUV can be done with, Thankyou 🙂
thanks Fazz, I've already got 3 videos that will show you how to remove the dash or most of it anyway. here's the link to the first 1 ruclips.net/video/4C7TFUrhZDM/видео.html
If you're talking about the a/c cabin filter, you don't need to remove the dash, you only need to drop the glove box down, remove 2 screws and pull it out. It's worth doing if your a/c fan is not blowing out much air. it may be blocked. I've touched on this one in a few vids but don't remember which ones. I can do a specific one for you if you'd like
There are two screws you need to remove there are were the warning triangles are, and the middle section trim where the handle is, it’s been held by 4 screws , 2 which is you mentioned and 2 are been held underneath the top trim section which you have to remove to get access and the remove the door handle screws. I did undo the whole trim and started from top. It’s easier if you do have trim removal tools as those pop rivets are easier to remove rather than pulling on the panel.
I have removed the whole trim 3 parts of it. There are 4 screws holding the middle sections the two you showed, the two are on top which is been overlaps by top trim sections.
thanks heaps mate for taking the time to share. i need to get some proper trim removal tools. I got the plastic ones from supercheap but they ended up being rubbish. I'll invest in a proper metal set later on.
@@DENMONKEY I use one from jay car cost around $20 there are proper ABS plastic one and good quality used to remove everything from whole dash to doing TCC lock up kit.
Thank you for video Rear cargo door lock been jamming for years all fixed thanks to you . Now how to remove 28 year old chocolate and coke from upholstery. LOL. Brand new car wife took a 3year and five year old shopping bought then Choc coated ice cream and coke middle of summer. ty again.
welcome Pete. Can't help you with the coke and choccie though. unless you have a dog of course
Thanks for the help always appreciated
Welcome erine, glad you found it.
Great videos, would be great to see you install a table on the rear door to 👍
I'm on it :)
Nice review and helpful 👍
welcome Hamad. Are you in Kuwait ?
@@DENMONKEY
Yes . I from Kuwait and i live in Kuwait . Watching your Nice channel
excellent. I enjoy knowing my videos get watch overseas.
Hi I have a question about how to change the metal frame on the spare tyre carrier on the rear door. Mine has rusted away in a few places
I can get a replacement frame. I'd just like some help on the hinge removal
Please make a table.
I have been looking to do that for so long.
Just need some ideas.
Hey Paul, have a look at the big reply I just did to Mike and have a squizz at the ebay ones and let me know your thoughts.
Hey mate.
Need to run antenna cable from rear mount to front cab.
What would be the best way?
Under carpet? Roof lining?
Ripper mate, I at least know how it goes now.
Hopefully it will be a good job and I am able to free up the mechanism
How did you go?
👍👍👍👍👍👍👍
Cheers
Great video but do you have any video that shows how to remove rear ac plastic vent or how to change the rear ac plastic vent
cheers Mate. I dont have a rear AC, where is the vent ?
Hi mate, great videos. Question, I have a 1990 SWB Pajero. My lock is stuffed and I can’t open the back door. Would it be the same process to access the lock on the older car? Thanks
I would expect it to be pretty much the same, yeah. I don't know for sure though. You should be able to access the mechanism and get it open from there......in theory
Hi Den, how often should you remove and replace the injector pipes, the service book shows replace the pipes the sixth time,my mechanic says not to touch them. I have a 2013 NW VRX with 94,000km, looking for some advice, thanks JB
Sorry John, I've got no input for ya on that one outside of what I've read in the manual.
G'day mate how's it going? I own a petrol nm pajero ( NM) . Have you done any video relating to that model? Or the petrol versions? Thanks Ashley.
Can't say I have ash, only on the nt I have which is a diesel. Check it the pajero forum in vic AU. Heaps of info there.
Mr Denmonkey, I have a problem with my NX Pajero with the rear door catch getting stuck and not being able to open the rear door. As you probably know on the NX there is no internal door release handle on the rear door (thanks Mitsubishi!). If I was on a trip and couldn't get the door open this would be a real disaster (thankfully it hasn't happened yet). I was thinking maybe I could cut a hole in the rear plastic trim behind the cover which hinges up. If I make it large enough maybe I could get my hand in there to manually operate the door mechanism? Also this would be good to keep the mechanism clean and lubricated, the lack of which I believe is the main cause of it getting stuck. Do you think this is feasible? I have also heard of other people running a wire which can be manually pulled to open the door, maybe this would be a better idea?
Give me a couple of weeks. I have a handle that mounts inside the vehicle on the back door so you can open it from inside. I just need to fit it and test it. No cutting required. Just remove the plastic cover over the rear wheel mount bolt and you can reach it in there. I'll get onto it quicker now I know you need it.
@@DENMONKEY Thank you. Much appreciated. I will keep a look out for it.
I've just loaded a new video for you which has a solution for you. I hope it helps.
@@DENMONKEY Thanks Brett, that looks like a very practical solution. Will definitely order one of these and have a go at installing it. Cheers and once again thanks on behalf of all the owners of Pajero's for all the invaluable info you provide. When it comes to Pajero's you are a legend!!!
Hey mate, just wondering if you’ve put in a rear door internal release? Cheers
can't say I have Steph, but if you find someone who has, point me their way. I'd be interested in that
hi have you had to fix side plastic wheel trims cheers ps table would be great
No to the wheel trims but it sounds like I need to get on to this take thing. Every one seems keen.
Did you say rear table???? Oh I hope so! It’s been on my mind also
I did Mike, I'm also considering these. let me know what you think. Ive got no idea on the quality of them though or fit really as this point. just considering options.
www.ebay.com.au/itm/For-Jeep-Wrangler-JK-Tailgate-Table-Heavy-Duty-Rear-Cargo-Shelf-Foldable-07-17/402308699433?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D1deb901f4554479dbdde4aeabf4ca81a%26pid%3D100675%26rk%3D3%26rkt%3D15%26mehot%3Dag%26sd%3D264297321852%26itm%3D402308699433%26pmt%3D1%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A85d6384d-289c-11eb-ad56-3edd30502ca9%7Cparentrq%3Ad4d98e781750a69fe1816f92fff4b654%7Ciid%3A1
www.ebay.com.au/itm/Kaon-Rear-Drop-Down-Tailgate-Back-Door-Table-for-Toyota-Prado-150-Lexus-GX-460/192549852406?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D1deb901f4554479dbdde4aeabf4ca81a%26pid%3D100675%26rk%3D2%26rkt%3D15%26mehot%3Dpp%26sd%3D264297321852%26itm%3D192549852406%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A85d6384d-289c-11eb-ad56-3edd30502ca9%7Cparentrq%3Ad4d98e781750a69fe1816f92fff4b654%7Ciid%3A1
www.ebay.com.au/itm/Foldaway-Tailgate-Table-Flexible-Rear-Door-Table-for-Jeep-Wrangler-2018-2020-JL/283568836725?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D1deb901f4554479dbdde4aeabf4ca81a%26pid%3D100675%26rk%3D6%26rkt%3D15%26mehot%3Dpp%26sd%3D264297321852%26itm%3D283568836725%26pmt%3D1%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A85d6384d-289c-11eb-ad56-3edd30502ca9%7Cparentrq%3Ad4d98e781750a69fe1816f92fff4b654%7Ciid%3A1
that last one has some stupid cup holders in the corners, not very useful I think .
The Kaon one is nice but a bit exy. I've also seen people get the caravan side ones and just use them. might be an idea too.
Great videos mate sold my pajero a while back and bought a hilux but still love your videos. Great channel mate
@@DENMONKEY yeah interesting. Never even looked on eBay. I’ve come across Kaon but I didn’t consider further as they don’t have anything available as a direct install for pajeros. I thought if modifying might be easiest to just make from scratch yourself. The hard part is justifying it. If I take camp gear I’m usually carrying a camp table. And if I need to escape the wind I cook in the boot. The tail gate won’t avoid wind. Hmmm. My arms are like jelly though, easy to twist. If I see a decent one on a paj I’ll likely copy it!
Thanks heaps Jack
The paj face book page has some kaon stuff on it for the Prado but they said they were looking to do stuff for the pajero. I've been meaning to get in touch to find out. I think they're in SA though.
Any one else noticed Haynes Mitsubishi Pajero 1983 Repair Manual missing sections 13 to 15.
hmm what secret info was on those pages?
@@DENMONKEY Section 15 was supposed to cover Trim removal lol.
I recently had to route a cable for a rear dash camera in my Pajero, and your video helped a lot, thank you! I posted my video here ruclips.net/video/rd4rxp1OSUY/видео.html
No worries glad to help