DCS: F-16C Viper | Mark Points
HTML-код
- Опубликовано: 14 ноя 2021
- Get DCS: F-16C from: www.digitalcombatsimulator.co...
In this DCS: F-16C Viper video, we’ll discuss the use of Mark Points in the Viper. A Mark Point location can be designated through the HUD, the HMCS, radar, or targeting pod, and stores the location in steerpoints 26 to 30. This is useful for returning to a target, and later, sharing over the datalink between flight members.
Mark Points can also be shared through the datalink. 
Игры
One of the most important uptdates
Hope the AG symbology will appear in the HCMS
I would say that this is the best update for the F-16 so far but I haven't stopped watching my wings wiggle all week.
Wings wiggle? Have I missed a wingflex update? The amraam wiggle has been in the sim for quite some time.
It's going to be a busy holiday season getting to grips with all these goodies...pods, modules, module updates, map updates, and that's largely just the ED content folks.
The level of complexity in AI terrain analysis that goes into just this one function on the real jet is amazing. Add to that the complex missile tracking systems, internal mechanics and electronics, and all of the sensors that provide probably an unquantifiable level of feedback into the computer... really impressive engineering to say the least
Very useful. Great to see this feature implemented. Thanks for all the hard work.
What a great day! Two brilliant updates. In these trying times it’s great to see that there are still better things on the horizon that we can look forward to.
ED team is killing it right now with the awesome Viper content keep it up!
Y' haven't used the Fox 3s this week have you?
@@AdamWalkLikeSuicide That's not really Viper specific though
@@777coletrain ; Affects her disproportionately though as only the F-16A Blk 15 ADF, TWN F-16A Blk 20 and IRQ F-16IQ had AIM-7 capability.
@@HowIsAsh some people just want to be able to simulate 1980s F16 piloting.
@@FirstDagger Taiwanese F-16As also carried AIM-7
I'm very pleased you guys have gone full speed on updates for this module. Each update is impressive every time. Thanks for the continued hard work.
Wags: the Viper is getting better and better with every update…
It’s sad he isn’t with us anymore, but Igor Tishin would have been amazed, proud and thrilled…! Thank you, and great job!
Who isn't?
Onwards and upwards.
Now I can relive my favorite Lt Col Dan Hampton stories.
Viper Pilot is such an awesome read! 👍
I absolutely tried that the night I read the book...it’s interesting to say the least.
I am always impressed seeing that air to ground radar in action.
I have also noticed the following functionality:
Mark Point to Steer Point - Press 0 M-SEL in Mark Point screen with Mark Point selected. Allows you to set current Mark Point as the Steer Point without leaving the Mark Point DED screen.
Change Mark Point source = Dobber Right
THANK YOU!!!!!
So much great new stuff coming to the Viper!
Finally!! Been really needing this ever since the tpod upgrade
I can't wait for the sharing through datalink to flight members feature! This will be awesome.
You can already do this: ruclips.net/video/ltWbllC919A/видео.html
Gr8 job ED, sorely needed update for the 16, now they can sniff out the truffles like the 18.
perfect video to start my day with !
Superb - loving the attention the Viper is getting. But, Wags always makes it look so easy (or is it me!!!???). Super clear video.
Thank you as always wags!
Great news! I hope the AG datalink comes next so that we can collaborate with teammates using markpoints.
This is huge. Nice!
Great work!
Thanks ED
Enjoyed? I love it! :)
I'm so glad to see such improvements.
However I'm having severe anxiety attacks waiting for the next Apache video.......ugh.
Great addition coming in ! Loving it ! Thanks for the great updates coming along for the Viper ED, appreciate it much :)
For once there is something i'm not understanding from Wags, and that is the "Offset Error", when he turns on the TGP to look at the MarkPoint he just made with the FCR.
I've replayed those 20ish seconds a few times but am finding it hard to properly understand it still :x
When he changes steer point he is still slewed away from the steer point that's why he had to press the button to sleew back to the new steer point
think of it like this: there's always a point of reference, and optionally an offset from said point. Initially you have the pod pointing at a steerpoint (SP), and that SP is the point of reference. When you move the pod, the reference point is still the SP, the reference point does not change, but now the system knows you want to look at some offset *from* that reference point.
So now you are looking at: reference point (still the SP) + some offset.
When after that you change the active SP you are just changing the reference point. But the offset is still there. So the system still thinks you want to look at some offset with respect to your reference point, which is now a new SP.
So now you are looking at: reference point (the new SP) + some offset (same offset than before, unchanged).
With the CZ button you remove that offset. So the system now points directly at the reference point (which is the second SP).
For example: If you slew off steerpoint 1 and then change to steerpoint 2, the slew created off steerpoint 1 is carried to steerpoint 2. Cursor Zero (CZ) removes the offset off the steerpoint.
When he slewed from his starting steerpoint to the target, it created an offset in his sensors so they were looking X distance in Y direction from the steerpoint. That offset stays when you select another steerpoint, so when he selected the markpoint it was applying the earlier offset to the new waypoint.
So say for example you slew 1000 feet north of a steerpoint, create a markpoint at that spot, then select the markpoint as your steerpoint, your TGP will look 1000 feet north of the markpoint unless you hit cursor zero first.
Thank you very much all of you ! Didn't expect so many great explanations :) I do understand it much better now !
Good morning. Is there a video explaining how to share the mark/waypoint(s) with your flight? Thanks Wags for all of your instructions and efforts so far... VERY helpful (understatement of the year lol)
Fun shortcut: pushing M-SEL while in MARKPOINT will automatically set it as your steerpoint.
:D Thank you!
I enjoyed this video on Mark Points. Have to make my way over to Western Iraq on the Syria map.
@@realQuiGon Thanks, I would have been flying into the invisible wall.
With that ecm pod we need the hts too
Please updates also the HCMS for AG. Many thanks!
Thank for the updates to the Viper, they are great. Pity that the last update brought back an old bug: AUTO steerpoint cannot be set anymore (with the dobber) in ICP in both stable and beta versions… 🤷🏼♂️
It can, the functionality simply changed.
@@MattWagner Where to look it up?
Dobber down to man/auto and hit 0/M-sel - workes like a charm
@@Maverick72nd Will try that, thank you! 🙏🙏
Hi Wags, great addition.
I've been off DCS for a few months so I haven't seen the new AG features. Question: what is the benefit for using the FCR to find ground targets versus using the TGP?
Weather, range, and GMT.
You can appreciate the ground radar when you try to complete the "Above the clouds" instant action mission for F/A-18. Your target is a transport ship at iranian coast and its location is random. The only way is to use ground radar mode, make SPI and drop JDAMs thtough a dense layer of clouds.
When you forgot to bring a TGP…ask me how I know that.
Yes, it's stationary, but its position is random. According to the mossion briefing, cargo unloading is in progress.
Will we be able to set Markpoints via a HOTAS shortcut as well or will we always have to go to the Markpoint ICP page first?
I love the fucking viper with it's updates
Can you also create a mark point with your HCMS? A bit like the A10C II? That way you can cycle between mark points / slave TGP to MP / slave Maverick to TGP / Lock / Fire
Great video, Matt. Is there a way to overwrite a markpoint once it's been saved as a steerpoint? Alternately, can they be deleted?
Have you figured this out because I can’t. Lol. So frustrating
@@commanderstud2417 ..Did you figure this out? This is what Im searching tutorials for right now, a way to delete and/or overwrite the mark points once theyre set...
Busy day! Yeah :)
2 videos 1 day. Must be Christmas
You guys noticed the North indicator on the HSD
Will it be possible to increase and decrease zoom on the HSD by slewing the cursor up or down this patch?
More datalink features!
wait... TWO in one day??
sweet!
Including a teaser for both AN/ALQ-131 and AN/ALQ-184. And a comment from Wags that AN/ALQ-184 long version is in works for both Viper and Hog.
I wish Persian Gulf map would get more expansions like these
I wish they add the Khark island with its oil facilities.
@@jakubdabrowski3846 I was hoping for Desert Storm area
Is this the new FLIR system over-work we're looking at on the TGP? I cant tell... havent flown in a while
Sicko mode
Mark points! great thanks! Did I just notice north indication on the HSD?
Yes. Yellow cross.
@@MattWagner You guys are really doing a fantastic job over there at ED. I just bought the Viper and I'm having a blast learning everything slowly as it's my first high fidelity module. I look forward to getting the Apache once I'm comfortable with this and hopefully in the next 2-3 years we might see a high fidelity F15E(or EX) from you and the amazing company ;)
I sense another large patch coming very soon.... gieb apacheeeee
How do you mark points with the head mounted display?
Matt please tell or show us your graphics settings? Your DCS looks insane and so much better👌🏻
See About of my channel.
Shooters Roll!
Great stuff; but still no MARKPOINT OFLY or HSD Creation? :*(
I would love to see the aoa on the hmd haha
If you slew the FCR, does the TGP is slewed on the same point ?
What happens if you already have 30 waypoints in a mission? Do markpoints overwrite them temporarily?
1) Pressing M-SEL/0 while the MARK screen is up should select the current markpoint as the steerpoint on the M3 software tape.
2) The radar cursor slew issue where the cursor jumps back to where you started slewing until the next sweep still seems to be there. Is this a DCS or IRL bug?
1- Yes, in game. 2- Correct as is and why going FRZ is a good choice.
Hi Wags! It is getting better with every patch but I have a question. Is there a possibility to create an overfly markpoint in the Viper?
Yea
@@MattWagner i remember col. Dan Hampton described such an usage of markpoint in F-16 during his CAS action in Iraq during a sand storm....
wish you would give the mission file you used with these tutorials, great videos.
In "Western Iraq"
?
oooooh and with the new thermal visuals it seems
Nope he was in tv mode.
How many years and months are we in on the 16?
very cool!
Is HMCS mark points not working and not included in video?
Hi Wags, can you show or tell us your graphic settings? My system is top but can't figure out what settings i should use to get on your smooth graphics. Thanks for alls your top videos!
See About section of my channel.
Nom nom nom Spangdahlem bird ^^
Everytime I try to change the azimuth in the ground radar when I'm zoomed in in DBMS, it never has any effect, expecting it to update the refresh rate like in this at about 02:15. Did that get changed, or am I doing anything stupid?
weird how i was literally thinking about this and it popped up, I wasnt even talking about mark points, i was just wondering about how they work and boom... feels creepy
Will there ever be a way to drop mark points using the helmet sight like with the A-10?
Please see video description text.
@@MattWagner
Cheers Wags
Can we hope to see a long version of the ALQ-184 soon?
Yes, it's in work for both the Viper and A-10C.
@@MattWagner Awesome! I'm really excited for that one
@@777coletrain Why? It's not that it can be properly modeled...
@@getsideways7257 it just looks way better and a viper set up for SEAD just looks weird without it IMO
Are overfly markpoints (OFLY) also implemented? Pretty useful when you want to mark units in CAS.
Yes. Apologies, I was a bit rushed and left that option out.
@@MattWagner Great Thanks! Please keep up with this recent new features video rate but please post them just before the update itself so I do not have to check new version every other hour :)
Also, are those markpoints, along with other steerpoints shareable with flight members?
I see what you did at the start pointing out h3 airfield… is that an expansion for PG or Syria?
Thinking Syria was done by an outside source would Wags be the one to announce it? They added Cypress but I've heard nothing about further additions -- although the location ("Western Iraq") does coincide with this map. Perhaps more hints later.
Me personally hope its for PG as that entire region is devoid -- Qatar and Bahrain could have been added, as well as "Southern Iraq" as far as I'm concerned.
Le HTS cannot be carried with the Lightning.
- Le TGP cannot be "slave" sur le HAD (inverse cannot too).
- Le HAD cannot give a position so sharpre (not even in PT mode, which need some pods in networks doing specifics geometricals maneuvers and synchronise goniometrical)
- Le HTS dont know how to inform the state of the transmitter.
- symbologies are wrong (really it's not that at all)
- the link with the wing don't work like that but it's nice to try to implement it. Only CG can use this function.
Source :F16 engineer who work on the system for lots of year. Check the "other" game.
It's great that the f16 is implement in DCS but it's very very well known plane system which is devellopped for year in *censoredmyself*. So people will compare. Hope the final release will be as good, and even better than the *biiip* version.
Will we be getting OFLY markpoint functionality too?
Yea
I assume since it was skipped over, is the HMCS mark point designation coming at a later time?
Yes, please video description.
@@MattWagner thank you, sir, and apologies, I was watching on mobile.
Wait just saw the moving target mode air to ground and noticed the ecm pod. Also western Iraq is that new?as always looking fantastic dcs is the most used pc game iv ever owned🤗
well spotted on that ECM pod! Waggs does like his little teasers in plain sight... He'd make a great sales rep for a company that's trying to sell products to an audience that watches his videos :P
@@CameTo He kind of is sales rep
Nice!
Why do you need an offset for EXT/DBS to provide a detailed picture?
Create Doppler beam shift.
Wags I love the F-16 updates but where are the Apache videos?
After the instructions for the new Viper features.
Thx Sir
YES H3!!!
and others like H3 Northwest and H3 Southwest.
Really looking forward to these coming updates!
As a music producer i wish i had mastered your voice, the sibilance of vocals and some other aspects aren't on point like the tutorial itself is. if you guys need i can help just give a tag. Anyways tx man
When I change the range manually in EXP, DBS or DBS2, it returns to NORM and its slightly annoying, is it a bug or is it normal ?
This is correct.
ah yes the 184 pod now very nice Western Iraq yes dream coming true
Where's the guide with the helmet??
What is that thing under the F-16?
ECM Pod, ALQ-131 / 184
Why dont you lock the markpoints with the hsd cursor?
You can. Marks are indicated as yellow crosses on the HSD that can be selected with the HSD cursor.
What's the clicking noise that starts at 6:04?
His throttle axis is jittering a bit on the afterburner detent. Going into afterburner over the detent makes a noise and if you keep moving your throttle over it it'll do that
W
For me its almost imposible to employ weapons with this same method in the hornet. Please wags drop a video on that :)
I dont think there is functionality to create waypoints from tgp or radar designations in the hornet. I might (hope to) be wrong tho
@@ttopiass Im talking about designating specific targets using the "Freeze" mode and employing precision weapons on target.
Some servers have waypoints that can get upwards of 30+ waypoints. When I set a mark point it conflicts with the other waypoints already set in the system. Anyone know what to do in this situation?? Again new mark points starting at 26 will conflict with the actual preset waypoint 26-30. Thanks for any help.
You should only use steerpoints 1 to 25 for navigation.
Since you only have 4 steer points to use with Marks, can you override them and reuse the steerpoint for a new mark?
Yes, they wrap.
That's good to hear, I usually use the whole alphabet in the Warthog lol. I have a slight obsession with them
@@lankypilot778 you make soup out of them their tanks with the gau8? See what I did there? No? Ok I'll see myself out :-( lol
You have 5 markpoints. 26-30.
Do you know how often a pilot would use the ground radar for an engagement?
there's precious few real world examples, and from all that I can gather, the bulk of these wars, maybe desert storm / shield and so forth, revolved around Air vs SAM... That said, if you can find one example of a pilot interview somewhere describing using his radar to find/locate actual ground targets (vs backup on waypoints like rivers/cities etc) I'd love to hear it
@@CameTo i read 2 books. both on the first gulf war. 1 a10, 1 f16 pilot. and every engagement they mentioned was either steer point, using mav seeker, or mk1 eyeball to find targets. never a mention of the radar.
@@sinsley1 thanks for that. This sounds in keeping with any interview I've heard also.
Wait… Did you say Western Iraq???
Google the Coords
Ugra Media has build a Western extension on Syria map.
Looks like we will be getting H3 airbase. Hopefully Dier Ez Zor as well
Guys did Wags just tease the new FLIR System on the F-16? Or am I wrong? It just looks way different then usual.
Thinking about the same, not sure. Maybe thats why he didnt zoom in that much?
ED said they will upgrade FLIR technology for all modules when the Apache comes out
Check again, was in TV mode the entire time.
@@jarhead1145 Yeah copy, just got the confirmation from a redditor haha
Do you use trackir?
Yes
still waiting for HTS to counter tpod's weight .
TGP and HUD marking don't seem to work for me. Just me?
I saw the Open Beta changelog. Waiting for migration to stable version. Thanks ED!
I didn't quite hear that.. did Wags say western Iran or..?
Western Iraq.
I think its Western Iraq
How do you clear the MKPT500+ from your HUD?
ICP WARN switch
@@MattWagner Thank you.
we see that ECM pod wags
Dont know why but the viper doesn’t transfer coordinates of designated tgp , HUD and FCR tgt to DED WHEN TMS UP. So can not create a Mark.
Even the DED it is non as in this tutorial. Do we need an update yet? Thnks
Please make sure you are using the current open beta.
@@MattWagner ok. it is not. Thanks for your intrest!!
@@MattWagner updated to open beta still doesn’t work….tms up don’t shows transfered coordinates TO DED from any sensor………
Following step by step, including matching altitude and distance, my image of the airfield is not nearly as clear and unlike in the video, I cannot change azimuth in DBS1 and 2. I have to be in NORM or EXP. Also after setting azimuth to 10 degrees in EXP, and then changing to DBS1 and 2, the scan is not anywhere near as fast as shown in the video. At the point where CZ is selected in the video, CZ is not shown on my MFD. Have they made changes that accounts for this? Make following tutorials difficult when things don't match up.
I just tested and no such issue here. Please use our forum to post a track so we can see where you are going wrong.
@@MattWagner I uploaded to F16 forum but right now only showed slow scan with azimuth 10 degree in DBS, compared to how fast it is in the video, and the inability to change azimuth in DBS1 and 2.
@@MattWagner you must be using an older version in the video and when you tested. I posted in the forum and it was confirmed that adjusting azimuth in DSB1-2 is not accurate and was corrected in an update. The scan speed shown in your video for DSB also cannot be replicated so I can only assume that changed in an update.