Appreciate the video… I had already had purchased the kit prior to having seen this video…unfortunately my good friend who was going to help install the kit unexpectedly passed away, so things were put on pause a bit. I am looking forward to installation.
This was great did a good job with the install and troubleshooting, now just need some custom bent a/c lines. had me hyped for the first start.... now just need to do this to my 03 350z. subbed
I always enjoy real garage builds. 99% of guys don’t have big shops with unlimited tools or budgets. You did excellent work, and gave credit to the guys who you referenced when you didn’t know how something went together. #Tipshat
Dope installation vid guys🔥🔥 this makes me way more confident in getting the same kit. Already have injectors and pump running e85 rn along with headers and other supporting mods. Definitely gonna pick up this kit within the next couple months🤝
ur pretty chill cause some of these other car people they just get mad at their subbers for just asking question like kids and other people r just trying to learn
That’s dope I got a 04 and want to boost bad. Did you do anything to the internals to prep it? I’m thinking bout getting a new motor first since mine has 190k miles. Great video by the way.
I have an 04 Z - I just put a 60k mile motor in it & I have a 2nd hand procharger im preparing to install. My z had 193000 miles / too scared to boost that
Compression test it. Needs to be better than 185 across all cylinders and less than 10% variance between them. Also do leakdown and look out for any cylinders with a significantly higher percentage than the rest
Can you do a break down of how much it all cost? Was the kit worth it? Would you go with a different ecu setup? Thanks for uploading this. Always wanted to try this kit.
I know you guys used the rtv on header and cross over pipe. But the pipe that the v bands clamps go on was rtv and a gasket put there? Sorry just a little confused. Great video by the way
Damn, so glad you made this video lmao installing this kit soon and this is easily the best video on it! Two questions if you don't mind: 1) I have stock exhaust with a muffler delete. I had ordered test pipes but I understand there's only one pipe (downpipe) that comes down from the turbo. Where does that connect? And do you even got to keep the Y pipe? 2) Can you run the Uprev tune permanently? I live like 4 hours from RZG and would much rather do Uprev remotely than trailer 4 hours to RZG haha
The downpipe will connect to your existing catback/ exhaust so you won’t need test pipes or a y pipe. As far as the tune rzg does e tunes so you should be fine for tunning. Appreciate the feedback and hope it helps!
@@str86ix26 Okay awesome, thank you a ton man! Build looks awesome. This video alone convinced me to try the install myself rather than paying someone so thanks so much🙏 Excited to see more!
@st86ix i have watched this video maybe 50 times, while im installing my kit. The only thing here you don't really show is how you got the 2 piece downpipe together, I have big hands and getting both of them together and clamped seems soooo hard. Do you remember how you went about connecting the two downpipe pieces
Great video!, just fyi when you need to clamp the electrical cables, use the back of the plier (not where you cut cable, but further back, behind the plier) you see there is a flat dented part... that is for doing this... it will give you more strenght for that porpuse... Hope it helps Regards!!!
I have the same exact thing I have planned for mine but I am going to custom fabricate a front facing intake for my turbo on my g35 I have one question what mods were needed prior to installing it cooling wise?
Hey bro, I have 2003 g35 and I was wondering what you had to do to log your pulls. And did the wideband sensor(s) replace any of the oem sensors? I'm stuck right now on what to do.
For me the tuner recommend I take a vid of the afr and send it to them. I ended up adding a bung for the wideband gauge closer to the turbo . I’d honestly recommend switching to a 2004+ harness and ecu. It would eliminate a lot of the tuning issues since the 03’s only have narrow band sensors.
Change all the flange fam. Thank me later, those shit soon or later will leak. I got those kits but modified everything when came to realize shit can't hold. I put at about 15lbs made 573wheels 485torques. Bumping it up soon.
@@str86ix26 All the hot side V-band flange and clamp. Flange and clamp came together anyways. You notice those Chinese old version cheap flange is flat surface? You don't want that kind. You want new version kind of flange that seal proper. Example of link below. I forgot the exact size of flange so remeasure the existing ones and order the right size. Link below is for example quality flange amzn.to/3lrZdra
Nice vid man ! I noticed 198k on the dash , how’s the motor holding up since being boosted ? Are those original miles ? Interested in boosting mine is at 192k lol
So I can do everything mechanically but know absolutely nothing about tuning, can any tuner send me any base map and I can start my car and drive it or do I still have to bring it to them? (Ik this is old but worth a shot)
For just around 500 subs this is amazing content .
Means a lot man!🙏🏾
Much respect to you man, not a lot of us out there that tackle jobs like this on our own. Build looks great, never stop man.
Appreciate the video… I had already had purchased the kit prior to having seen this video…unfortunately my good friend who was going to help install the kit unexpectedly passed away, so things were put on pause a bit. I am looking forward to installation.
You are like the calmest and most collected car guy ive ever seen lol awesome video and excellent problem solving man
This is such a great video. Very detailed to the point that i feel like i can do it myself. Thanks bro.
Go ahead bro you got it
perfect video thanks for going through the steps cause I’m interested into making a turbo 350
This was great did a good job with the install and troubleshooting, now just need some custom bent a/c lines. had me hyped for the first start.... now just need to do this to my 03 350z. subbed
I always enjoy real garage builds. 99% of guys don’t have big shops with unlimited tools or budgets. You did excellent work, and gave credit to the guys who you referenced when you didn’t know how something went together. #Tipshat
Dope installation vid guys🔥🔥 this makes me way more confident in getting the same kit. Already have injectors and pump running e85 rn along with headers and other supporting mods. Definitely gonna pick up this kit within the next couple months🤝
Who’s guys theirs one guy 🤔🤔
Wow so glad I found this, your video is probably the best install vid I've found, keep it up
Appreciate it 🙏🏾
Subbed for update video!
10:42 excuse me lmfaooo
Been waiting for a video like this forever 🔥🔥
Finally a video where you actually learn something!!!
This is a dope video. I’m turboing my z now and this video is great
Yo this is sick I learned allot from this thanks for showing everything step by step
awesome content homie, congrats on the build!!!
Banks Super Guage is a great setup, not as cheap as basic gauges but does almost any reading.
I’m bouta turbo my car as well with this kit!! This was a great video brotha!
Great job - you can do ANYTHING if you can do this :)
Bout to supercharge my 350z
Good luck
Thank you for your service 🫡
MD represent. Nice video. I’m from Shady Side and about to turbo my Nissan D21 truck. Keep up the good work
Hell yea bro! Thank you 🙏🏾
good looking out bro, thanks for the tutorial
Yoooo. I'm literally doing the same in my garage at home. Same car same kit same state.
Hopefully we’ll see you around when you finish bro!
ur pretty chill cause some of these other car people they just get mad at their subbers for just asking question like kids and other people r just trying to learn
Which is true because I was once in the situation
Hitting us with that plenum squat
... Nice ☺️👍🏻
great vid, cant wait to do stuff to my z
Nice detailed video can’t wait to see it running
You can check out the page @jumpboy23 IG
Sick build broda your content is fire 🔥
Colder plug and sometimes a smaller gap when boosted.
Pretty good bro! I am thinking of doing this kit to my 350Z. Your vid helped out allot!
Thank you
Really nice video dude I enjoyed looking at you video ✌️
Looking forward to tuning day 👍👍👍
Man i wish you had yt partner so you could make som money on these videos. This is the first video I watched and I subbed immediately🔥🔥
Thank you so much 🙏🏾 means a lot❤️
That’s dope I got a 04 and want to boost bad. Did you do anything to the internals to prep it? I’m thinking bout getting a new motor first since mine has 190k miles. Great video by the way.
I have an 04 Z - I just put a 60k mile motor in it & I have a 2nd hand procharger im preparing to install. My z had 193000 miles / too scared to boost that
Mine has 190k but roughly 140k were all highway miles, should I still boost it?
@@crossacoustics6814 mine has 190k, but roughly 140k miles are all highway, should I boost it?
@@BdubsMusicPicks no 😂
Compression test it. Needs to be better than 185 across all cylinders and less than 10% variance between them. Also do leakdown and look out for any cylinders with a significantly higher percentage than the rest
Real good and detailed, hope it helps when I put twins on my G
Great video man.
Bro at like around 3:40 I thought someone was bussin in my crib lol. With headphones in sounds like someone opened a door
Subbed, nice job man, can't wait for the follow up vid 👍
Appreciate it🙏🏾
fw you for the work you doin
Much respect
Nailed it bro good lookin out!!
Thank you
just subscribed, thanks bro learned alot
Glad to hear that💪💪😁
this car will go BOOOOOOOOOOOOOOOOOM
just subbed, planning to supercharge my G
Dude love the video vary infront explaining I hope it still on road if so I would like an update thanks dude
Good job and patience 👍
Subscribed, and thankyou in advance for my one day ugrade.
Np
Good video brutha
Loved the video. Good details on this video. I'm going to do this for my G. Are you still in the DMV?
Can you do a break down of how much it all cost? Was the kit worth it? Would you go with a different ecu setup?
Thanks for uploading this. Always wanted to try this kit.
Will do in a future video! Stay tuned
@@str86ix26 you ever do this vid??
I know you guys used the rtv on header and cross over pipe. But the pipe that the v bands clamps go on was rtv and a gasket put there? Sorry just a little confused. Great video by the way
For the V-band connections you won’t need to put any rtv there. Appreciate the support 🙏🏾
Damn, so glad you made this video lmao installing this kit soon and this is easily the best video on it!
Two questions if you don't mind:
1) I have stock exhaust with a muffler delete. I had ordered test pipes but I understand there's only one pipe (downpipe) that comes down from the turbo. Where does that connect? And do you even got to keep the Y pipe?
2) Can you run the Uprev tune permanently? I live like 4 hours from RZG and would much rather do Uprev remotely than trailer 4 hours to RZG haha
The downpipe will connect to your existing catback/ exhaust so you won’t need test pipes or a y pipe. As far as the tune rzg does e tunes so you should be fine for tunning.
Appreciate the feedback and hope it helps!
@@str86ix26 Okay awesome, thank you a ton man! Build looks awesome. This video alone convinced me to try the install myself rather than paying someone so thanks so much🙏 Excited to see more!
@@Gborohooo did you do it ?
@@kami_dred7319 Yessir
Great video🤘🏽
Thanks 🙏
WHATTTTT! Awesome video.
Thank you more coming soon
Good job mane..
@23:00 the commentator aka 350z hype man
That little orange seal on the fuel pump connector was not supposed to come off lol
That fuel pump work... gg. Question. What was the work done on the pump for. Meaning why did you change it? What does the new one do?
Are there any y pipes I can get to replace that restrictive one?
Great video
That orange rubber on the plug is for locking connection my g😢
@st86ix i have watched this video maybe 50 times, while im installing my kit. The only thing here you don't really show is how you got the 2 piece downpipe together, I have big hands and getting both of them together and clamped seems soooo hard. Do you remember how you went about connecting the two downpipe pieces
We really appreciate the support
Where do you get that T fitting @ 26:59? Does it have a part number or size?
Cool video bro
It doesn’t matter if the cables touch the gas like that is that Anti water ? I’m really curious thank
I would move THAT DAY! If some mfs come running run move street like dat
you think it would work for a sorta stock g I got a cold air intake n the engine can hold 400whp on stock internals
Once you boost it you no longer need a Cold air intake
Stock block? How much psi didbyou run and how much power did you make ?
Cool video now come and do mine🤣🤣🤣 imma drive my car all the way over that way .
👀👀🤣 say less only if I get to drive it after and no promises if I beat on it and it blows🤣
Great video!, just fyi when you need to clamp the electrical cables, use the back of the plier (not where you cut cable, but further back, behind the plier) you see there is a flat dented part... that is for doing this... it will give you more strenght for that porpuse... Hope it helps
Regards!!!
Appreciate it!
Looks like I’m boosting my G35x now
Rip front axles
@@cainadkins3985 Update: I blew my engine now I gotta rwd swap it 😭💀
I have the same exact thing I have planned for mine but I am going to custom fabricate a front facing intake for my turbo on my g35 I have one question what mods were needed prior to installing it cooling wise?
I’ve got on 03 and they were still able to send you a base map? Says on the website they can’t tune 03 Z’s/Gs
fucking badass bless up sir
Hey bro, I have 2003 g35 and I was wondering what you had to do to log your pulls. And did the wideband sensor(s) replace any of the oem sensors? I'm stuck right now on what to do.
For me the tuner recommend I take a vid of the afr and send it to them. I ended up adding a bung for the wideband gauge closer to the turbo . I’d honestly recommend switching to a 2004+ harness and ecu. It would eliminate a lot of the tuning issues since the 03’s only have narrow band sensors.
Dope video
Thank you
Tha was a good video and really explain a the way true good job 🦾
Change all the flange fam. Thank me later, those shit soon or later will leak. I got those kits but modified everything when came to realize shit can't hold. I put at about 15lbs made 573wheels 485torques. Bumping it up soon.
Which flange bro
Wat other things did u modify on urs
@@str86ix26 All the hot side V-band flange and clamp. Flange and clamp came together anyways. You notice those Chinese old version cheap flange is flat surface? You don't want that kind. You want new version kind of flange that seal proper. Example of link below. I forgot the exact size of flange so remeasure the existing ones and order the right size. Link below is for example quality flange amzn.to/3lrZdra
Yea we did so in the new video with the black g35
Vibrant vband
Did you guys have to weld in another 02 bung for the wideband? Or did you just run it by the last exhaust piece with the 2 ports they come with?
I personally welded my own 8 inches after the turbo
Idk if Yk but it said grey and gold to run 10.15
Update a year later? Debating this. At $1850 it's a steal compared to the $4500-5000 of the turbonetics if it lasts.
Do you recommend the velocity kinetix manifold for a 350z?
how much did the whole process cost you?
Hello bro !
the factory maf sensor does not work well, which maf did you use?
I’m using the HPX Maf, giving me no issues.
I know it’s the Rev 9 kit but where did you buy it from? Rev 9 website or eBay? Or local?
Nice vid man ! I noticed 198k on the dash , how’s the motor holding up since being boosted ? Are those original miles ? Interested in boosting mine is at 192k lol
Yea but my motor has 60k
I got a low rev g so it’s the “vq35 skyline”
Visit harbor freights and get some cheap power tools or an impact and compressor. Good for beginners and everyday use
Will this fit 2004 350z automatic thinking of getting one
gj bro
hey i was gonna buy this kit for my g35 is it safe to use paypal on there website there’s no other option so i just wanna be careful
Bro I need to know how you did the oil drain.
Yea I have a video that show how I routed it
Great video, but you gotta chill with the sealant. You have a habit to put way to much.
Let’s go!!!!
So I can do everything mechanically but know absolutely nothing about tuning, can any tuner send me any base map and I can start my car and drive it or do I still have to bring it to them? (Ik this is old but worth a shot)
It’s easier getting a base map and making sure everything runs good then u take it to the dyno
Rzg is a good tunner
Not sure if you'll get to this comment but what did you use to widen the hole in the exhaust pipe?
I cut out a square on the other side of the pipe and the that gave me space to drill the hole on the other side than I welded the square back
what did you use to keep the fuel pump from popping out
What turbo kit is it
How many V Band clamps do I need to order?