INJORA Brushless Motor & ESC Issues Solved!!! + Running Footage
HTML-код
- Опубликовано: 21 ноя 2024
- We had a couple issues with the box stock run. With a little help and some trouble shooting the problems have been resolved. So lets take this new system out for a crawl. How did it do? Tune in and check it out.
Glad you were able to get it figured out so quickly. Definitely seems like a helluva package for $60!!
Right! 3S batteries come tomorrow. We will see how that takes it up to another level.
@@hyperc5249what 3s do you recommend? I want them as close to same size as stock batteries if possible
@@hyperc5249Looking to try a brushless system for an scx24. What remote would you recommend. Thanks.
They used inferior dip switches on that ESC... The spring pressure is probably not enough to hold a good connection, and it is possible there's a bit of manufacturing debris inside of those switches... If you can actually get those switches to hold contact it might stay working properly... Hopefully, it does because that's like the best system going for the price right now...
Glad you found a fix. I was going to hold off until you found a fix for it, but now its full send!
Yes, sir. I can recommend this now. Glad I could help.
Ok.. so I've just watched this video and I'm very pleased that you've been able to work through this problem with the brushless motor and esc. I'll have a look at it tomorrow as it's a bit late here in the UK. But a Big Thumbs Up to you and your channel. I have subscribed and I look forward to seeing your future uploads. Thanks a lot dude 👍🏼🇬🇧
You are welcome. Good luck.
I've tried flicking both switches before leaving them in the 6v position, but still I'm getting brown-out with 64% battery power left. I've even gave the switch a quick spray with brake cleaner. The only thing I can think is, maybe I should follow others and go 3s. Apparently, others has gone this way with 100% fix.
Thank you for this video. I was going insane wondering why my rig wasn't working and now because of you I can enjoy my toy. 🙏
@@NastyN8s_RC Awesome. I'm glad I could help. There is nothing more frustrating than electronic issues.
I had a feeling that the glitching was something in the settings. Cool! And the other issue sounded more like a calibration issue but glad it’s all working out the box.
Me too. INJORA did a great job with this setup.
Good update! They are going to sell a billion of these.
💯
Dang! I've seen so many positive reviews about this Injora motor and esc that I decided to get one, but they are already out of stock😥
That stinks. I figured they would go fast. I'm sure they will be back in stock soon.
That’s awesome you were able to work it out. I ordered one should have in a week or so thanks for the great video.
You're welcome. The whole reason I started my channel is to help the R/C community make informed decisions. So we can spend are hard earned money on good products and not junk.
Nice review and tutorial. Awesome crawler👍🏾🔥
Thanks. It's definitely in the top 3 builds now.
Hello
Great video. Very useful.
Do you know if these esc makes ultrasonic noise ? And if it does. So you if it can cause ear damage ?
@@DrKVo13 I don't believe so.
@hyperc5249 I just installed it on my CR18P Pro ,No problems whatsoever. Pinion fits too. That makes this combo a direct drop in for the hobby plus CR18P line
@@rcflightadventure7282 Awesome. Thanks for the info.
Nice I'm definently considering this.
It's worth every penny. Great little setup.
my new fat viper stutters exactly at 20% throttle and it has correct esc parameters
@degaboss Yes the more I use the INJORA the more I like my furitek combos.
Look like mini Komodo but cost less and have more RPM 3600kv vs 3456kv
It's a great motor and ESC combo.
@@samintrepid micro😁
I installed one and mine freaked out when I hooked up servo, it went haywire, tried what you did and everything works but my servo will randomly wine and not steer one way some times? Any help ?
@@dustingreen5470 sounds like a faulty ESC. Be careful it might burn up your servo.
Does the motor fit also in a CR 18P?
I ordered one for my CR 18P pro . i really hope so
With slight mods, it might fit up.
Any clue why mine is cogging at low speed while climbing slight inclines?
@Jayizzy433 These have been having a lot of problems. Cogging is the worst. Programing isn't even helping.
Thanks!
Wow. Thanks you.
Q U I E T...
Very!!!!
Oh by the way, your ESC not initializing is a very common problem with brushless systems, and most of the time, I've had to adjust my throttle trim... It'll power on beep and count your battery cells but it won't initialize because it can't see your transmitter because the throttle is out of calibration with the ESC which is why you need to move your trim...
Besides that everybody knows that onboard BEC suck ass... personally I would just pick up one of the castles $20 becs and and disconnect your Rx from the BEC altogether...