Видео

Thank you for your question. Yes I’m pleased to say that the DeWalt vacuum still works very well both dry vacuum and wet. It has a very strong suction and is very useful in my shop and elsewhere. Consider subscribing. Thanks. Joe.

Thank you very much for your kind words. I hope you found it useful. I have really enjoyed this battery powered grease gun actually makes greasing not only easy but fun. Consider subscribing. Thanks. Joe.

I’m glad you found it. Interesting. Enjoy the rebuild. Consider subscribing. Thanks. Joe.

Thank you for your absolutely excellent idea that would make placing magnets so straightforward and you would never mess them up. Thank you for your suggestion. It’s great. I’m going to employ that with my next bill. Consider subscribing. Thanks. Joe.

Search “Countersunk Disc Magnet” and screw one somewhere in your shop. Forever more all projects will be clocked off of that one magnet.

That sounds very dangerous. Please check the polarity to be sure the battery is put in the correct orientation. Otherwise I don’t really have an answer for that but it sounds like there’s a short circuit. Consider subscribing. Thanks. Joe.

I’m sorry that’s happened to you. But since the dealer seem to have changed the situation, I would return it to the dealer and have them sorted out. Who knows what they did but it’s probably not that difficult for them to figure it out since they installed the heater. Consider subscribing. Thanks. Joe.

@@JosephHunstad Joe, that was the first time I’ve ever asked a question in comments and I thank you for responding! I did subscribe and like. It was over a year before I needed and realized I did not have 4WD because I rarely drive my Ranger since taking a new job. Sappington pro outdoor in Jackson, Missouri is my local dealer, but I will never take anything there again. They arrogantly took no blame for the problem, but would look at it for a service fee. Also, they charged me twice What their estimate was for putting the heater in. Meanwhile, I realized they put the switch in backwards so now I do have four wheel/one wheel/2 Wheel Dr. but the performance/standard/work button still does not work and was click in the correct way. I’ve checked every fuse and relay that I could find and finally gave up. Again, Thank You! Have a blessed day.

Thank you for your comment. I do frequently replace the battery and check it to be sure it’s working but in this case the squirrels unfortunately had chewed through the wires and the plastic main basin and the purchase and I had to replace those. It has worked well since then. Consider subscribing. Thanks. Joe.

Thank you very much for your kind words. I’m glad you found it useful. Consider subscribing. Thanks. Joe.

Yes, I will help you. Look up online a diagram of a six stage reverse Kosice water filter. You will find many images many examples of this some better than others, but that will clearly show you all of the water connections and help you. Consider subscribing. Thanks. Joe.

Oh, that is so sad. I understand not wanting to remove the rivets because it’ll be difficult to put them precisely back the way that it was made. If you can see that shaving possibly a jewelers forcep with an ultrafine tip - they are actually very inexpensive - might be able to remove it. Consider subscribing. Thanks. Joe.

Thank you very much for your comment. This is a useful tool admittedly I don’t use it that often but when I needed it it really has worked well. Consider subscribing. Thanks. Joe.

So great question. Typically I I bottom the screw out and then back it off six turns that’s just a beginning point and then you can you can bring it out more or less based on the function of the Jack but it’ll probably work well at that point. Six turn seems to be a good starting point Consider subscribing. Thanks. Joe.

Doc what is the different between IDLER LEVER A and IDLER LEVER B for Prusa XL which one I have to print for my XL

Thank you for your nice comment. I was actually disappointed that I obscured the view and probably needed to zoom in more on the individual steps. I might reshoot it. But I have the links to the directions and the STL so you can print those parts. They seem to work a lot better for me, but I’m still having problems with TPU. Consider subscribing. Thanks. Joe.

I’m glad you found it useful. It’s been a great toolbox. I like it very much. Considers describing. Thanks. Joe.

Good question I absolutely will do that today. I will also link the step-by-step instructions from Prusa.

Hey, that’s great information. Thank you very much for your comment. We had a very successful year this year with more than 20 martins currently in the house. We’re blowing away. We need to add eight more gourd for next year. Consider subscribing. Thanks. Joe.

That’s a very good question. I believe you do need to reset manually the open close points to fix that. I hope your Gates working well. I really like my new one. I think it’s a vast improvement over the previous one. Consider subscribing. Thanks. Joe.

Thank you for your comment. Yes when your chisels are sharp, mortising is a pleasure. Consider subscribing. Thanks. Joe.

Thank you very much for your comment. I’m glad you found it useful. Consider subscribing. Thanks. Joe.

Thank you very much for your excellent comment. I appreciate that. Yes it’s a good one. I’m glad that was helpful. Consider subscribing. Thanks. Joe.

Thank you for your comment. I did not know that it was an old version when I put the video out. I think the laptop at that time was current but time does March on. Thanks again for your comment. By the way, the addition of RAM did not speed up, my computer noticeably. Thanks. Consider subscribing. Joe.

OK, you ask a very good question. No one really knows the answer to that however, you should make it such that the temperature becomes stable. Probably probably a couple hours is all you need but typically I leave it overnight. Consider subscribing. Thanks. Joe.

Thank you very much for your kind comment. That is a great file. It makes it really easy and I’m glad you found the video useful. Consider subscribing. Thanks. Joe.

Hey, I understand this is not the very finest piece of machinery but for basic grinding, which is what I use during metal working it works fine. Thanks, consider subscribing. Joe.

Oh that’s funny. I understand. Yes, it was a bit of a challenge. I used to find screwdriver once I positioned it to get it to pop in there. Consider subscribing. Thanks. Joe.

Hey, you are so welcome. Yes why not save some money instead of having to buy directly from Prusa. Thanks for your comment. Consider subscribing. Thanks. Joe.

Thank you for your question. I’m sorry that you have a leak. Number one you can reuse the current weights you have on your new hose and I believe you can buy a new spray hose at Lowe’s Home Depot or other stores like that. Consider subscribing. Thanks. Joe.

Thank you very much for your nice comment. Consider subscribing. Thanks. Joe.

That is so disappointing. I’m so sorry about that. I’m sure you got a new replacement though from the store. Consider subscribing. Thanks. Joe.

If the jack appears to look similar to the jack, I rebuild I believe the kit will be just fine. It actually comes with extra O-rings and seals that allow it to be used on multiple jacks. Consider subscribing. Thanks. Joe.

Alright, thank you.​@@JosephHunstad

Excellent question and congratulations on your RANGER. You will love it. Yes, I would use the same wire gauge that’s in the pulse bar connectors. That way you’ll be safe. There are so many brands of lights to choose from. Take a look at the video. I did on the light bar installation for the Ranger it lists the brand which has worked well for me. Thanks for subscribing. Take care. Joe.

Thank you very much for your comment. I’m glad you found your attachment and now with properly sharpen bits. It’ll be super fun to use. Consider subscribing. Thanks. Joe.

There’s always more than one way to use a tool. I’m glad you found that useful. Consider subscribing. Thanks. Joe.

Thank you for your question. First of all, I have a video that you might want to check out uninstalling a front bar LED light with a switch. It goes through the step-by-step. Thanks. Joe.

Thank you very much for your comment. It was so successful. I’m gonna get eight more. Every one of our gorgeous is full this year. It’s amazing. Thanks. Consider subscribing. Joe.

Even though it’s old, it’s a great unit it sharpens drill. It’s perfectly. I’m glad the video was helpful. Consider subscribing. Thanks. Joe.

I believe it’s because you need to adjust the needle valve. It’s in the video. I would loosen it about six turns it should allow the hydraulic fluid to escape and allow the jack to come back down. Consider subscribing. Thanks. Joe.

Hey Donald, thank you for your very nice comment. I’m glad you found it helpful. This is worked great for me every single time with no issues and then when I print with it, I haven’t had any issues with the pieces coming apart. Consider subscribing. Thanks. Joe.

So many of these jacks were produced with different brands, but they all are very similar and the rebuild kit that I have mentioned in the video description usually works for all of them. That’s what I would try. Consider subscribing. Thanks. Joe.

So I am retired now, but the results are available. You can see those on HKB cosmetic plastic surgery website. My former practice. Take care. Consider subscribing. Joe.

I’m not really sure I understand the question. Basically, I put the filament reels in so the filament comes off the bottom of the reel and goes straight ahead into the small couplers that are in the front lower panel. A PTFE tubing can go through the coupler so you can put the film directly into the Cortex tube. That answers the question. Thanks. Joe.

@@JosephHunstad thanks for your answer. Now I understood what happened. Aliexpres store "Sealand" sent me regular fittings and PTFE tube cant go through them (inside diameter 3.3mm)

Oh man, that’s a bummer. I’m sorry to hear about that. Is it within the warranty timeframe work? That’s a drag. I’m still working OK thanks. Joe.

amzn.to/3RFQ9Qu

You’re totally right I’ll have to make an adjustment to that video. Thank you for saying that consider subscribing. Thanks. Joe.