PRUSA XL UPGRADE 5 PRINT HEADS 1ST RUN
HTML-код
- Опубликовано: 29 авг 2024
- This is the 1st run of the PRUSA XL upgrade from 1 to 5 printheads. A step-by-step process of getting all of the heads lined up and ready to print and describing all the adjustments is presented. This video describes the 1st run after the upgrade to 5 nextruders.
Click here to order 1-Toolhead to 5-Toolhead Upgrade: www.prusa3d.co...
Click here to order Original Prusa XL:
www.prusa3d.co...
EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - 6pc set Metric: amzn.to/4bI1g3Y
TECKMAN 11 in 1 Torx Screwdriver Set :
amzn.to/3UMPtvh
* please be advised that the above link is an affiliate link, and I do receive a small commission if you make a purchase which helps support videos like these
As a retired plastic surgeon, I explore many areas of my current interests including repair, restoration, wood working, metal working, tool review, hunting, traveling, and farming. Please join me on my journeys through these different areas of interest.
#DIY #doityourself #howto #TheMoreYouKnow #Teach #Learn #DrJoe #problemfixed #problemfix #problemfixer
Well, thank you for that nice comment. I’m going to add OCTO. Pi also!!
Joe - you have found your calling, and yet again one step ahead of me! I’m inspired by your RUclips presence :)))
Thank you for your kind words, Jonathan. I want to become a better flyfisherman. Unfortunately, I have a left knee total joint replacement on April 11. That will slow me down a bit. It will be about the sixth surgery. I’ve had on my left knee. I hope it’s the last. I do like being a RUclips creator. It’s fun for me. It was a natural transition from teaching plastic surgery to teaching the other fun things that I’m currently doing. Sheri and I would love to catch up with you again maybe for dinner or something? Thanks Joe.
Hey Joe- just wondering who your knee guy is? I’m imbedded wishin the Novant system now. On a side note … just landed my first Tarpin yesterday down in 10,000 islands off the Florida coast ….RUclips video to follow!!!@@JosephHunstad
Dr. Kurkis from ortho Carolina is performing my knee surgery. March 18 at Novant Huntersville. Hope to see you there. Congratulations on that tarpon. I assume you cut it on a fly rod. That’s fantastic. Look forward to that video. Thanks. Joe.
Great informational video Dr Joe already bought mine with 5 heads and been through this already very straight forward procedure but takes some time thanks for sharing
Hey, thank you for your great comment. I’ve really enjoyed this printer. It’s amazing how it is so precise. I’ve got some other 3-D printing videos if you care to look. Consider subscribing. Thanks. Joe.
Dr Joe I am already subscribed and watching your other videos also I am in middle of printing enclosure for my Prusa XL and next going to add Octo Pi to it to manage it remotely much better than the Prusa Link @@JosephHunstad
So I am not printing to sell things I’m printing for my own use. Yeah the bamboo weighs a lot of filament with color change. Having five distinct heads, probably more expensive, but minimal waste. I built a really nice enclosure which I have a video on. You should check it out it’s about $120 for the polycarbonate and hardware from Ali Express and the main structural elements are all printed on the Prusa XL, which is a great way to start your printing journey on that printer. Hey, if you wanna buy one of these printers you could click my link which would help me it doesn’t cost any more for you. It’s the exact same price. Thanks. Joe.
I cannot find which bolt adjusts the Nozzle seal height calibration. First run, Steps 3 and 4, before you start using the wizard.
I will show you I will film it and send it tomorrow
Thank you for your inquiry. Sorry it took me so long to respond. If you remove the extruder, then you will see the screw that adjusts that rubber strip that cleans the head. Then put the extruder back on and your screwdriver can be turned in and out to adjust the position of that so it’s just touching the nozzle tip. Consider subscribing. Thanks. Joe.
How’s it printing so far. I’m thinking of buying this printer and need some use cases.
Thank you for your question. I’m amazed how smooth it prints when it does multiple colors. It also has minimal waist. I printed a number of things with five colors. It turned out really well and again the contour very smooth with almost no layering. Speed is good. Quality is good it’s not perfect but it’s pretty close. If I had to do it over again, I would’ve bought the five head printer right off the bat.cons subscribing. Thanks. Joe.
@@JosephHunstad very good. Are u printing stuff as a hobby or to sell ? I’m trying to find a use case to buy it. I have the Bambu x1 but multi color printer take to long and waste a lot