Видео

Hi, I like how you "float" your filon. I decided to do just that with my teardrop build. The only problem is it shrinks and expands and warps the filon. Is this something you just live with or how do you avoid that? Yours looks so good.

Wow! In my head, it seemed easier 😂 I hope I can eventually be able to build one. Trying to wrap my mind around how this is waterproof and avoid leaks through screws. I just don’t seem to understand how this works.

How did you dispose of the trailer full of trash?

Thanks. Following your video I was able to install the same converter in a 2004 Fleetwood Taos popup that had a failed Centurion unit. The new one works fine. The black shore wire attached differently on the old unit so your instructiions made it clear as the WFCO converter didn,t have any. Thanks again and I enjoy watching you build your camperes.

te amo

Do you use any glue or just screwed under trims/edges?

What width/type of staple are you using in the video? Also is there a name for the utility plywood or is that just what they call it?

Also is it necessary to use sanded plywood for the exterior wall? I am thinking of doing 1/4 wall with 3/4 insulation and 1x inner frame with 1/4 inner wall. Thanks!

I don't have tabs to bolt to but I have a 2x4 1/8 inch box frame the middle supports are smaller. Should I just bolt to the cross supports? Bolt through the main frame Screw to the main frame with Tek screws (self tapping metal screws) Get tabs welded on? Or maybe do riv nuts in the main frame?

Just got a complete pop up camper with title for $100. I’m gettin ready to tear it down and build a teardrop on the frame so I’m definitely going to follow your steps 😊 any recommendations on building it lighter would be awesome cuz I need to keep it around 1200lbs lol

Hello. Since I can't afford to buy a caravan, I want to build it myself. But I can't find a drawing diagram with all the dimensions. I would like to ask if you could help me with a project. I have found a person who will do the cutting on a cnc machine. Thank you so much. Email rosengrozev@gmail.com

Which router bit did you use for this?

Very nice

What is the white material you used for the outside?

Čau kámo super karavan budu také dělat podle tebe

Very nice work sir !!

👍👍

Nice to see this teardown. I'm looking at using a popup for my trailer build.

Better frame than expected

What is the t bar black one name

With that converter, you can actually install tandum breakers, 40/15 and 20/20 . That will give you two additional circuits for 110.

Always, always, always connect your ground first, neutral next, then your feed.

What sizes is you door if I may ask .

Beautiful job

I watched flora bama build his teardrop and it convinced me to build my own

I like vintage too! But I do want a teardrop!

Someday hopefully my dreams will come true and I’ll have a teardrop ♥️

I hope to build one someday, I’m just not allowed to where I live right now.

wow you have made an awesome job there , love the detail mate

Haha, that eyes 👀, funny =) 14:05min Great Camper

Amigo, coloca as medidas. Excelente trabalho. Mas ensina a fazer mostrando as medidas. Abraços

So no glue on the skin?

hi, would you mind sharing the link or source for black edge trim and aluminum trim as well as Pylon sheets?

If you like it, it's all that matters. 👍

You did nothing to seal the plywood before you attached it to the frame?

I own a sign shop. We NEVER use spray on graphics. That "sticker" should be wrap vinyl meaming air egress rear psa. You'll have bubbles the minute it his sun.

I was told not to hook up dc grounds to the ac ground bar?

Do you have the plans?

Glad to see you got well again,I built my trailer I'm on the door trim on the back I'm using aluminum checker plate for trim,I ended up using poor man's fiberglass with sheets and water proof glue,I rounded my corners no side trim and right now I'm trying to figure out what kind of paint to stray on

Very nice job!

Why did you use the extra pocket screws and didn't they run into the other screws holding the spars in?

So your feet and head have to be under shelves to sleep? You would have a lot more room in a van

I'm totally new to any type of "from scratch" construction. I fixed some bathroom walls in my old house that rotted, but otherwise nothing. I see a LOT of great pointers that I can use. I bought the trailer for $800, it was a tear drop that was rotted. Tore it down to the trailer. I have SO many questions because I get a LOT of advice, but all from people whom have never built one. Beyond that, I don't know tools so forgive my ignorance. I see you did the inside FIRST, then outside when adding the roof/ceiling. I would appreciate any/all feedback you could give! :) This looks EXACTLY like the shape of mine! :). I do not have extra cash to spare, so I'm going as economical as I can, but still want it to be free of leaks. 1) What is the gun with the hose attached and what is in it? Is that a nail gun or some type of adhesive gun? 2) Did you undercoat the plywood underneath with anything?

Que precio lo darias?

What is the avg weight on a build like this? I have a weight limit

You need a bigger drill lol

Man it is a beauty, well done sir 👏

I live in Ontario Canada . I just found your videos and wondered if you build on orders, I like to buy one from your build, Michigan is not fat from my home. If you can build for us and price is reasonable I like to contact you with the details. Thanks for all the information you provide for the people who gets benefits from your knowledge. Salute from 🇨🇦