Видео

Hey, thanks for all that you recorded and info. question: so to get the plug is a T-50?

Thanks for the great instructions. Got the old seat out and the new seat in.

Can crp919e do all that also?

Great video! Imo this is a better solution~

Oh darn… I was hoping you would show the brake light part… I don’t care about the clean install on the dash so much. But thanks for the vid.

Just subscribed, by the way ...what's EAS ?

Hi Mike,could you access the EAS with this device? i got this device and it seems quite useless as it comes; for it will only give access to a few basic systems... I wrote to the company to ask if i could gain complete access the EAS if i pay fro the "full function" package,in the Mall app,but they said 'this function is not supported' but didn't tell me if it was included or not in the package which costs only 34u$d...its a matter of paying to see... looks like i will have to get the gap tool after all..or perhaps the Pathfinder software and connect through a USB/OBD cable... the story goes on

Thank bide is great

So is 2015 very different?

I've been trying to get my sons running since it warmed up here in Northern MN with no luck at all, replaced old gas with new, did an oil change, and replaced the solenoid with still no luck and really no idea of what to do next, but after watching your video I am eager to get back to it and get it figured out with a new check list of things to test and try. Awesome video, well explained and filmed, thanks a ton for taking the time to really show where things were and how to access them, that definitely saved me some time. Definitely a sub and like, wish me luck! ✌

"Tummy TUCK" hahahahaha

I have a question...this is my 2nd Lr, and the navigation is always missing.. they'er always on Ebay for sale, but are the wires that connect the back of the navigation station just tucked away in back of that ugly cubby spot that they put there, are do i need a donor Lr for the connection that goes on that back of the navigation to where ever they connect to...I've not yet seen a video about putting one there and there wasn't one, lord knows that there's a lot of trucks like ours and they don't have that station there.... if you make the MISTAKE OF UPGRADING IT you and the truck LOSE THE ABILITY (UNLESS you have a gap tool and 97% of us don't) to communicate. meaning, EVERYTHING that it used to tell you , you now rely on the gap tool, and that's not what makes a land rover a land rover. so don't take it out and making say its an upgrade if it DOESN'T repeat what the 1st system did and better. Its called an Information station for a reason

You made getting the video files from the camera harder than it had to be... You have to clear the connections to use the app. It works seamlessly

Great video and valuable information. But I have a question. Where did you find the current air compressor firmware identification in GAP Tool? I can’t find a screen that tells me this.

Hi Mike, great video with details which is refreshing. Your vehicle lift is very interesting what make and mode is it, I'm looking for something similar, did you or does it have dogs location for the Chassis, is it a Quick Jack, keep up the good work Dan LR4

Do I need to pay more on program if after I bought it ?

A great video. It has been a great help removing a front seat from my Range Rover Sport 320. Basically the same vehicle as the LR3.

I bought a 2017 Mercedes-Benz 170 sprinter 3.0 cargo van to build into a camper living quarters. My van has 300k on the mileage runs. Excellent diesel is designed to handle high mileage as I am a truck driver. My work truck has almost 3 million on my caterpillar engine . One main reason I chose Mercedes-Benz is rear wheel drive, and the under coating is excellent by Mercedes-Benz , I also bought a 04 land rover discovery ll also a excellent suv for overlanding no air suspension very easy to lift , I only gave 4300 for my van off of copart lots of good deals if tour timing good, everyone biggest issue in life is time this year I go to level 6 in life time is the problem with too many projects I'm planning to sell my home in near future debt the only things keeps us all working, as some people pay 60k to 200k for a mercedes-benz van unbelievable I got mine I build out myself all in probably 40k due to things costing so much like aluminum front and rear bumber roof racks , flare side, I already have my dometic ac. max air fan , lithium batteries by renogy and solar panels, Truman heater , and a few more things to start. As I said, time is everyone issue and money . Ram has one thing over Mercedes-Benz. It's wider, but I'm no fan of the front wheel drive. I go check out your other channel

thanks, you took some of the pain out of a new install 🙂

This is a fantastic series of explanatory videos. The explanations are clear and concise and you demonstrate each phase of the inspections and repairs in a manner which is easy to follow and understand. Very well done.

Excellent review… Thanks!

more than 3 time i saw your video

yes i like you video thank you 😃

if only u put rurron in brackets u would have got more views

Any thoughts on alternate paint options for hood and top.

Did you get any transmission faults while going through the fill procedure?

Hi Mike, I needed your help I am having issue starting LR3 2005 4.4L v8 petrol model. Sometimes the car is not starting no crack at all (3 times it started when connected with external Battery charger , battery charged fully and clearing codes) and it will operate without any issues for some days and the same issue repeats. The thing is that same setup is not working always and I observed security red light is still blinking when key is inserted while having issue. When the key is reading I was able to program 2 more keys with JLR Mangoose cable. This keys also not operational while having issue. I have already changed battery with 92ah agm battery. Confirmed key is having correct program. So I am suspecting immobiliser system something issue.Please take time create content on key immobilizer issues so that I can clear the issue

I have reached out to the company who makes the Launch Elite tool and asked them to reply to the many questions in the comments above my knowledge level as well as address issues with the key FOB programming and height calibration failing to work.

Thank you So much....much I've learned i helped my uncle on his LR D3...and now its driving more smoothly...all the way from Namibia.

So I have an issue. My rear suspension is staying raised and one come down. Is it the rear valve blocks responsibility to vent the suspension or is it the central valve block or is it the compressors rear galley vent on back of that or is the filters plugged on compressor? My compressors newer amazon one. Went off roading, and rear locked up high. Won't vent gallery.

Mike!!!!!!! You are the boss! This worked perfectly for me. I have a 2005 LR3 and used this video with your instructions to a tee. The only thing I couldn't install was the parking brake bypass, which I couldn't seem to find on e-bay. However as you mentioned a simple switch did the trick. I could not have made any of this work without your effort and precision this video. Even pro installers would have a hard time figuring this out and at a great cost. You rule, man! Reminder for anyone not very savvy like me doing this that the Alpine comes with a plastic protective piece for the fiber optic connection that might be misleading and confusing that the connector won't fit your car. That simply needs to be pulled out with needle nose pliers. Mine had an a two piece sort of embeded plastic protective thing, and they both pull out easily. Plugs right in after that. Also, remember to connect all three of those black ground wires together. And if you opt for the switch between the [Yellow/Black Striped] wire and that [Green] wire for the parking brake sensor like Mike has detailed - remember that it will still not allow you to go into settings with the engine running. First key click/turn to power the unit on then bump the switch it off and on in "Settings" mode and you'll see it will wake up for you to modify everything. Fantastic again, Mike. THANK YOU! Subscribed and always going to you first for the real stuff.

If the plastic drain plug doesn’t come out and is stripped should I simply move on to removing the pan just knowing it’s going to be 10x messier?

Thank you for the help!!!

Where would we get the gap id device? We just got a key made for our LR 3, from Minute Key. After three attempts, we have a key that starts the car, but does not lock or unlock the car. We DID have a new car battery installed about a month ago, and after that started having issues with our key. We dont know if our original key suddenly not working is connected to that or if it is just a coincidence. Thank you in advance. Im hoping to avoid a trip to the dealership for an $800 key.

Hi l have question aborto the scanner where l can buy and what the name because l dont found scanner for reprogamer land rover discover 2005 here in usa please can you help whit this información thank you

Amazing, thank you so much for that!!!

You are a nice mechanic, I like what you do, and you helped me fix my car myself, a Jaguar XF

Very great video thank you

How have the struts held up? I have an 08 I want to convert back to air suspension but I'm deathly afraid to buy aftermarket struts

Bought the unit and tried height calibration on L494 but it keeps failing..

HI,Are you able to share how you do Height Calibration using this tool.

I’m looking at doing diamond fabric covers on mine Iv doing black headliner with led stars can I add foam to the seats to look like bolster

If your RZR is still sputtering, this is what fixed mine! So I check the spark at the plug it was misfiring, I opened the factory gap until I had a constant spark centered on the electrode approx 40 thousand, in conjunction with adjusting the float for a lil less fuel in the bowl no more misfiring on acceleration or top in … thanks for the video I learned a lot from it

What do you need to update the firmware on the air compressor. Put in a different compressor (amk) instead of Hitachi 5:10

Thanks

Great Job very well explain...

My Tacoma does not have seat air bags but I have seen some saying that you have to re-calibrate the passenger seat for the dash airbag, (2005 Tacoma) to function, is this true?

hi. my 2007 lr3 v8 displays the hdc fault system not available. its not engaging gears. the gear lever not stuck on park position. i recently changed the gear selector bracket thinking that's the cause. of no avail. any ideas what the problem could be? also the air suspension dropped at the same time. thanks . paul

I offer 100$ to any supplier that sell to me one piece of these earphones replacement, Parrot zik 2 or 3 earpad replacement. If any supplier produce this part, IT WILL BECOME RICH. The whole world expect and demand this piece.

Great video, chasing the problem then the fix. Now to avoid all those issues with the compressor, valve blocks, air shocks, etc. Simply convert your air suspension into coil suspension and never have problems EVER again folks.