Видео

We bought a new sliding table saw so the old set up had to be dismantled and moved out of the way. First I had to move all the old shelves and build a new saw station to house my kapex and add storage then I could dismantle the old setup and move the old table saws

My porch had an old rod iron post and railing combo that I didn’t much care for. I’ve been meaning to do this for years and finally had a little time.

I flip you flip we flip and then mill. Also I inspect the door with a find tooth comb for any flaws then fill then sand. Absolute riveting

I go over some of the maintenance and what I like and dislike about the machine

Bought a cheap lift table from Canadian tire and turned it into a functional shop multi function table. I can use it to move around and lift heavy things as well as an perfectly aligned in feed and out feed table for my jointer

I have to measure from a square end to an out side angle. It’s critical that it’s perfect and the long point is what matters so I use a piece of wood the same height as the final piece, cut the angle on it and double check the saw is set perfectly. I then measure back and square down at an easy number and transfer the mark into the face of where I’m measuring then but the tape into the square e...

In this this Zinger I take a deep dive into my inner self to discover my true thoughts on Will Smith and emotional outburst at the recent Oscar awards.

Here we fling a few arrows flip a door glue on some planks and glue up some mullions. freakin enjoy

You heard

Quick look at a big we use to apply glazing tape to stops and muntin bars. I think Jordan made it first. I’m not totally sure though..

Applying the planks to a door core that will yield a 12 foot tall pivot door. I only have so many clamps so I can only do half of the one side.

Made a whoops. Fixed it. Luckily it was on the hinge side

I made a extension to my work bench to enable sanding and other exciting actions on longer pieces. It was the style at the time. I once had a different extension but it wasn’t wide enough so I fashioned a new one that.. you guessed it.. is wider. It also features various dog holes as well as a screw to firmly hang an air compressor nozzle

Just a quick video where I grab a little fire wood with my new husqvarna 550 xp. A big upgrade from a cheaper smaller saw.

How I Mill interior doors for hinges and hardware

BEST TRACK SAW TIP. Fix the hose problem

PART TWO, building a trestle table.

CLAMP RACK

Glueing up VG Fir planks for bi-pass door liners with Titebond 2

Wood-mizer LT15 Demo. Milling core material for next custom door order.

Oneida dust collector Quick Tip for Dust collection made easy, easy bag change set up

Part 1 of building a trestle table

Makita brushless saw. Out with old in with the less old

Flipping a 12’ tall pivot door with a gantry

Building 12’ tall pivot door jamb

Snickers 6241, Quick Long Term Review.

Big French Pivot Doors.

Worlds greatest electrician , remote start for Oneida 5hp dust collector

SANDING A HUGE PIVOT DOOR!