Видео

Were i can find a turbo Drawtroug i have a Martin turbo Drawtroug for sbc setup and looking for a turbo

Interesting video! But why do I want to mess with a 301? I have a TA with a 400 with the 6x-4 heads on it! I believe it’s the W72 engine. Has a bigger hot rod camshaft and single plain intake. Runs really good. Thinking of switching to a 455 and putting all the parts from the 400 into the 455. Camshaft, heads intake and headers

Nice job , the custom work on the brackets nice. E brake set up as well. I’d like to put a built 6:42 4.8 Ls turbo in one of those with a TR6060 6 speed 3.73 Eaton Posi. 4.9 was the Original size. I had one in a Buick Lesabre, maroon 4 door sport wheels, it was pretty gangster! You should have used a hydraulic roller cam/ lifters, stage 2 turbo cam. I would pay more for a resto-mod with the yr round reliable power. You’ve changed too much to keep the engine/old school . Plus wasn’t the compression like 7.1-7.5 , just too low to start with in my opinion. I’m gonna need 500 at the crank to make it fun , 650 to make it fast and fun, feel me?

I can’t do the bright red interior. Nice job underneath. Yes I need 2 black marks to seal the deal. Needs a 700R4 or hydro 350 and 3.73s/ Eaton posi.

I'm going to do this but don't know what to use for an alternator bracket. I don't want the bulky one attached to the air pump.

Amazing work you are doing, Joe. Can’t wait to see how the turbo mods work out. A ball bearing turbo would be awesome.

Hi Joe, what are the stock connecting rods made of, and do you use them in your own T/A for the increased HP.

That is a ton of torque for a 301 cubic inch small block V-8!

i had one. man i miss it

any idea why a 1981 transam with ws6 would have such a hard riding suspension over bumps? also when a bump is at the left rear, the car sounds like you just dropped a metal tool box on cement? any Ideas?

Cant wait for the update.

What is the most horsepower and torque that you’ve personally ever pulled out of one of these 301 turbo cars? Have you ever seen anyone pull out more power than you were able to produce, I highly doubt it as you are the only person building these that I’ve seen in the last couple of years worth or searching. Thanks

I had Joe do mine, and no regrets whatsoever. Highest recommendation.

Do you have any videos of the governor

Nicest and most knowledgeable guy out there We are luck to have this knowledge

Mr 301 At His Badass Best! Don't Mess With Mr. 301! 301 Joe, You ROCK! WOOH! LONG LIVE THE PONTIAC 301!

Sounds muffler and slow

Good Luck Getting At The Distributor On A Pontiac 151! Yes The Iron Duke! Particularly In A 1979 MONZA! ITS BURIED! On Passenger Side In The Back Towards The Flywheel! And Underneath The Intake Assembly! Yep, BURIED! A Lot Easier To Access On My 1973 350 Firebird. Probably The Same Effort As The 301.

Beautiful car, my 81 still have the original engine and transmission but I been thinking about to remplace the 301 turbo and going with a 455 but I don know if that’s devalued the car,

What is the purpose of deleting the air pump?

I just put a 77 400 in my 79 Formula in place of the 301. The 400 is totally rebuilt and runs like crap. I used the quadrajet off the 301 minus the 1-1/2 inch alluminum spacer. I have no vacum to the PCV. Wondering if deleting that plate is the source of my problems.

Is that your Sheet Metal intake?

Awesome video, question for the 200r4, for the cooler lines, is the top line connect to the bottom of the radiator cooler and the bottom line connect to the top of the radiator?? I keep seeing that the 200r4 lines are reversed.

301S ROCK! 301S RULE! KEEPING THE PONTIAC 301 ALIVE! YEAH!!

Those are the ugliest wheels ever made! They definitely need swapped out for either the 15x8 turbo wheels, the 15x8 snowflake wheels, or the 17x8 year one snowflake reps.

I wanna know what brand & model those door speakers are?

Why do people waist their time ??

Lucky Andrew Johnson. Wow! Hope He's A 301 Fan Like I Am!

Is 6 x head good for a 71 400

How much cost that turbo ?

@11:18, OH SHIT ON YOUR PART! YIKES! MISPRONOUNCIATION IS A VERY BAD THING! The Correct Way To Say It Is AD ji Cint. Accent On FIRST Syllable, Unlike The Capital Of MONTANA Where It's On The SECOND Syllable.

301 Bashers TAKE DAT!!! HAHA!!

301s RULE! 301 BASHING SUCKS!

Ah, A Fake Quadrajet! I Didn't Know The Base 2bbl 301/135 Had That. My Stolen 1973 350 Firebird Had That Teeny Tiny Puny Rochester 2GC Carb Very Small Carburetor For Such A Big Engine.

I Had That Air Injection Setup On My Stolen 1973 350 Firebird.

NOW DO THE AMX 401 VERSION!!

301 BASHERS, TAKE THAT, AND STFU!!!!

Did you allow for installation of conventional heads with your custom made head gaskets ?? Oops. Still not possible, 😒

Wow - very nice results Joe ! Pretty much double the HP of a stock setup. 500 torque is healthy big block power

That intake flex hose is missing the cinch strap.

The aluminum head

THE 301 IS JUNK I HAD THREE AND EVERYONE WAS JUNK

Never thought I'd see the day where malaise era smog junk would be considered rare. To each their own I guess.

Wow ! What a beautiful car. Just wondering what kind of spark plugs did you use or would recomend? I have a 80 turbo as well that i need to replace pkugs as well

Yes, there will be day codes on the ignition wires. It will be a number then Q and then a year which stands for a given quarter of the year. If they are original, they will precede the assembly date of the vehicle. It is missing the small sheet metal piece that goes from the air duct into a hole in the fender. Correct, 1979 was the first year that the high beam control was moved to the steering column. No, that is a E-Core AC Delco filter. I believe the original may have been a PF40 which got later superseded to PF47. I want to say some early literature actually makes reference to using both filters as an either or situation.

Not bad at all !! That’s awesome

That is a really cool specimen! A guy I know has a 80 301 non turbo car he bought with around 5k miles that was really neat to see. I spoke to you about it as I got tye engine, fuel tank and exhaust out of it as he swapped in a butler 455 IIRC.

What? No drag strip testing, Joe? (I'm sure the owner would "love" seeing you mudding up his quarters.) :D

Love to buy the 15x6 original rims off that! 👍

Have it’s Sister car 78 Caprice Classic 2Door in green, love all GM B-Body 2Door Coupe cars 77-87 Caprice and 77-85 all other Divisions. That is is a very nice car! 😊👍the small GM 267, 301, 305 307 engines of the era were not powerful but VERY durable/reliable 👍👍👍