Видео

I just don't understand why we have two fans in front of another pair of fans from the gpu, surely this created turbulence due to misalignment and reduced overall efficiency. That paired with the fact that the brackets which hold the fans have air passing through them creating more noise than there should be. I mean... at this point i'd rather have them coolers tied up and suspended in air with the graphics card fans facing the other way like on RTX 4070

Will this case fit a normal ATX PSU if I don't plan on using any RGB? Great build btw.

What lights do u use in the room?

Appreciate your step by step cabling. Love how its neat in the front and hidden at the back. Amazed u crammed so many fams in there!

I have completed this build yesterday night but I have a problem. On my msi 550 vdh MB the RAM is blocking the middle fan of my arctic freezer aio by a mere 5mm. I unscrewed the middle fan and moved it a hit to the side fixing it with sticky tape, but is there another solution?

what rgb colour is this`?

clean build ,10/10

Can you fit a 3,5 hdd in this case ?

Nicely done. And good video plus cable management.

11:42 What? The pump's temp display is activating even before the Windows boots? How? Mine only starts to show the temp AFTER the Windows boots and the watercooler software is loaded.

heat pipe on the nvme is crazy lol

Lian Li finally made a case that will have move out of my unfailing Lancool II Mesh. The recessed fans on the bottom are the innovation I needed as bottom to top cooling pattern is so far the best method. 1 side note: If using the bottom fans blowing upwards then you can remove the rear 120 and reverse the tubes on your AIO to give yourself a few more degrees due to no hose interference from the front 140's. In testing this was 3-5c cooler with an Arctic III 280 up top.

This is a very beautiful build!! I plan on building in this case in the near future!

Beautiful cable management work!

D32 Pro next?

Clean cables management!

can this case carry on the plane?

This is so beautiful. I will build my Dan A3 very similar to yours. Thx from Germany, Bro

how is the gpu doing being so close to those two 120s

is the same setup can be used with super flower atx psu? can the rear fan also be 14cm?

Cuanto pesa en kg la pc armada?? digamos que quiero llevarla en un viaje de larga distancia en avion

I would love if you had text on what each cable is 😀 like front cpu fan or whatever.

would an asrock b660m-c fit in this ?

Wrong airflow and no bottom dust filter. No good building method.

In reality the case is much smaller than what it looks like here.

Are those the cables that come with the power supply or custom ones?

It's pretty awesome how everything fits in. Nice build you have done! 💪 Are those RGB fans disturbing the airflow for the GPU? I might have gone with three of the Thermalright TL-9015B instead, because they are thin /slim form factor 90mm for the front fittings OR for using them as the air outtake

Wouldn't it be more effective to turn your CPU cooler fans around and use the rear fan as an exhaust for all that hot CPU air? I'm just a noob, so IDK, just curious.

I'm curious, do you think the Corsair Shift power supplies would work in this case? I know that the fan would be drawing air directly from the case. This isn't a concern, I would be more curious if the mounting bracket would interfere with where the psu cables plug in.

What PCIE riser did you use?

this went hard

I have here 10+y old case. Silent, "you can kick it and not much will happen" sturdy. But time files so it's time to upgrade and why not go with nice Fractal Design North case! What a disappointment!! That case is definition of cheaply made, flimsy, bad case. My GPU is *bending* the perforrated back!! The case should protect the components, and secure them in place, but it's so flimsy, that it bends under them! Next very pleasant thing is, that even high-end fans made this case resonate, so even though no fan is making any by ear noticable noise, the case sounds like humming gong. It's total garbage with wood in front. If you want it, but it from somewhere where you can easily return it "if" you will need to do so.

Is it possible to install 140mm fans? Is there room for them?

Wait those magnetic covers don’t stay on? The guy who had my PC before me really didn’t know what he was doing

i was trying to find a video with this case and a 160mm psu to make sure my psu will fit, i think i find it. Beautiful build btw!

8:42 It is not in focus and does not look good, but where is it connected?

How is your CPU air cooler doing on temps just for games not stress tests? Never mind just saw it in your description thank you.

Very nice :)

Just rebuild my pc into the same case but im getting 3x 120mm slim fans for the bottom intake since my current fans are too close to my 4070s. just to be safe and move air a lot easier.

i could not get my PSU situated with the fan facing into the case until i watched this...running the power cable to the back of the case was genius. completely overlooked that option!

Show the other side of it coward

Maybe I missed it, but where did the PSU cable that plugs into the wall go? Seems to just disappear behind the back panel

The case is hot. There is no fan in the front and it does not draw air from the bottom.

On amazon it states that I can use a 240mm AIO. If I wanted to use the AIO I'm better of getting an SFX or a short ATX PSU will fit? I already have an ATX PSU and don't feel like buying an SFX but if I have to for this case then I prob will. EDIT: I'm just gonna get the bigger version the Jonsbo D31, it can support a full size ATX and even a 360AIO but now I can buy a 280AIO and use my ATX PSU I already have. Great video!

i prefer DanC4 than lianLiDan, the danC4 move gpu on top and i can have lovely air cooler xD but still classic nice itx

is this the best airflow for this case? 🤔

Beautiful

Excellent job and setup.

In this pc enough cpu-cooler plus back 120mm, try you will not loose of effectives!

I hate that it seems to be acceptable to dangle the PSU on just two screws in these smallish form factor cases.