![M10 Stuff](/img/default-banner.jpg)
- Видео 34
- Просмотров 369 356
M10 Stuff
Добавлен 14 июн 2018
Random Stuff
Watkins Solana TX hot tub heater replacement. How I replaced my hot tub heater and pressure switch.
Watkins Solana TX heater replacement amzn.to/3TEiZSF. How I replaced my hot tub heater and pressure switch amzn.to/4al0gRX. The element alone can be changed to save money amzn.to/3TClGnZ, but with the corrosion I wanted to replace the entire housing.
Heater Part #31003
Updated part #73994
As an Amazon Associate I earn from qualifying purchases.
Heater
amzn.to/3VfGGCe
Heating element
amzn.to/43laBe8
Pressure Switch
amzn.to/4al0gRX
Heater Part #31003
Updated part #73994
As an Amazon Associate I earn from qualifying purchases.
Heater
amzn.to/3VfGGCe
Heating element
amzn.to/43laBe8
Pressure Switch
amzn.to/4al0gRX
Просмотров: 327
Видео
Building a half bath in a garage and installing a macerating toilet. Saniflo Saniaccess 3
Просмотров 7 тыс.5 месяцев назад
How we built a half bath in a garage using a macerating toilet. While the macerating toilet is expensive, it saved a lot of time and money by not trenching a drain. They can be installed far below and drain line and pumped a long distance to that drain line. Comment any questions you have. Saniflo Saniaccess 3 toilet amzn.to/42i6Zt1 Safety Door spring closer amzn.to/4bfMVLT As an Amazon Associa...
Installing a mobile home exterior door
Просмотров 5735 месяцев назад
How we installed a 30” x 74” mobile home door purchased at westlanddistributing.com in Sacramento. The wall studs were 16” on center so the door fit perfectly between them. This was a mobile home room addition and no header was needed, which there wasn’t room for anyway. Comment if you have any questions.
Replacing an old circular bathroom exhaust fan
Просмотров 5 тыс.6 месяцев назад
Replacing an old circular bathroom exhaust fan with an update rectangular fan. Broan 50 CFM fan. amzn.to/3RURbcc As an Amazon Associate I earn from qualifying purchases.
Repairing a Whirlpool oven by replacing the igniter.
Просмотров 16 тыс.9 месяцев назад
Whirlpool oven not working. Diagnosed and replaced the igniter I searched the model number online and found the part list quick. Then I entered the part number on Amazon. This fits a wide variety of ovens. See the list below. amzn.to/3Zt1Ywl As an Amazon Associate I earn from qualifying purchases. Oven igniter Model Number W10918546 W10140611 3186491 98005652 PS11770066 AP6037202 W10918546VP WP...
Installing foam faux beams with mounting boards and toggle bolts
Просмотров 67110 месяцев назад
We installed these beams parallel to the joists and therefore used custom mounting boards and toggle bolts to hold to the drywall. This is the Fypon brand which was very lightweight and easy to use. Please comment if you have any questions or suggestions. Thanks for watching.
Installing a Lenco Trim Tab Switch Kit on a 2012 Mastercraft X-35 replacing the SmartWave system.
Просмотров 1,8 тыс.10 месяцев назад
Installing a Lenco Trim Tab control kit on a 2012 Mastercraft X-35 to replace the SmartWave system. This kit was to replace an older after market trim tab control panel. The adaptors were not compatible so we stripped the wires and connected with wire nuts for now. This kit was designed for dual actuator, which means two on each side. We only needed the single actuator kit for this install but ...
How I turned insulated attic space into large living space.
Просмотров 76 тыс.10 месяцев назад
This project was only $2200 in materials and tool rentals to add 180 sf of living space. Adding lumber to turn trusses into joists and rafters. Adding electrical and hvac dusting to new space. Adding subfloor and drywall. Adding wafer lights and custom closet organization. A big thanks to The Closet Doctor, 530-450-5353, located in Loomis Ca, the greater Sacramento area. Check out their channel...
How to install an attic gable fan. QuietCool AFG SMT ES 3.0
Просмотров 38 тыс.11 месяцев назад
This gable fan has been well worth the money and effort. I’ve tested it on multiple consecutive days of consistent temperatures. It keeps my attic approximately 8-12 degrees cooler in the summer, which in turn keeps the house cooler. Comment if you have any questions. The AFG SMT ES 3.0 is the more energy efficient, speed model. amzn.to/3KtXMWW The AFG SMT Pro 3.0 is the same but a less energy ...
2022 F150 Lightning Lariat speaker upgrade from basic B&O to Alpine R series.
Просмотров 8 тыс.11 месяцев назад
This was a simple, affordable upgrade that has made a huge difference. Check out Provo Beast Audio Installations for tons of content youtube.com/@ProvoBeastAudio Front Speakers install. Detailed video ruclips.net/video/lWztpMYzeW0/видео.html Rear Speakers install. Detailed video ruclips.net/video/Iqkm4PW1N8U/видео.html Front Speakers amzn.to/47fm0xB Front Speaker Brackets amzn.to/3qbPuvH Front ...
ROC SUP CO. Inflatable Paddle Board 1 year review. Vachan Pump review. Slab Creek Reservoir review.
Просмотров 12 тыс.Год назад
We love our stand up paddle boards by ROC SUP CO. There’s nothing I would change about the product or experience. amzn.to/3rsT1pB amzn.to/3XNPOgo Universal SUP seat. amzn.to/3D99mTi The Vachan pump is fantastic and blows up the SUPs while we get other things ready for the water. Vachan Electric Pump amzn.to/3O7k6Yl
Painting a bathtub with Rust-Oleum Tub and Tile
Просмотров 94 тыс.Год назад
This was a very simple project that made a huge different and saved $400-$800. I believe the included container was designed to hold both parts but I used a larger bucket to make it easier and less likely to spill. I recommend gloves and a breathing mask of some sort. The fumes are strong. Rust-Oleum Tub and Tile amzn.to/437x5xx Norwex sponges amzn.to/3NXzkza Drain removal tool amzn.to/46rPWq9 ...
F150 Lightning Tire Pressure Monitor System TPMS reset
Просмотров 12 тыс.Год назад
F150 Lightning Tire Pressure Monitor System TPMS reset
Converting a gas powered mini bike to electric
Просмотров 34 тыс.Год назад
Converting a gas powered mini bike to electric
F150 Lightning Emergency Frunk button tests
Просмотров 982Год назад
F150 Lightning Emergency Frunk button tests
Rivian Wall Charger Installation. R1T. R1S
Просмотров 15 тыс.Год назад
Rivian Wall Charger Installation. R1T. R1S
F150 Lightning Charge Station Pro unboxing and connection
Просмотров 6 тыс.Год назад
F150 Lightning Charge Station Pro unboxing and connection
F150 Lightning power off while driving test
Просмотров 627Год назад
F150 Lightning power off while driving test
F150 Lightning Blue Cruise tests with eyes closed
Просмотров 1,2 тыс.Год назад
F150 Lightning Blue Cruise tests with eyes closed
F150 Lightning Back Up Speaker disconnect (for replacement)
Просмотров 1,9 тыс.Год назад
F150 Lightning Back Up Speaker disconnect (for replacement)
Without the fan "sealed" onto the gable vent, would it just draw air from outside through the frames around it rather than from the other end of the attic? My old fan is dead, and its just mounted in space behind a large triangular gable vent. I need to get a new fan, and im kinda rhinking i need to board up the rest if the gable vent around the fan. Is that necessary/advisable?
It would be better to seal it up. That’s what the shields are for.
Absolutely better than before. One more coat would definitely spiff it up. 👍🏽
Awesome. Thank you.
My Vevor controller has Rev leads,
Can it hold 350lbs?
I can’t find anything specifically on weight. But we have had 3 adults on it and it did fine.
I’m not crazy about it having an app to operate it. Apps always fail after a few years.
Most attic fans don’t have any controls at all. They work strictly off of temperature settings. This is no different. The app just lets you change those setting without climbing into the attic and changing them manually.
@@m10stuff gotcha.
whats wrong with ryobi?
Nothing. It’s just something contractors make fun of because they are low cost entry level tools.
adding a outlet doesn't make it a dedicated circuit by any means...you would need to go straight to the panel
@@TK-ri5eg a dedicated circuit is not needed for these. I was referring to the furnace
Rats.? Not mice..Rats in your attic..Much bigger problem .$$$ To fix that first..😢😢
That’s super cheap and easy to fix. They were already dead
Thank you, I have a whole house fan from 1950 I thought I had a manual for it but unable to find. I went to attic and saw the belt probably original I never changed it I’m here since 1991, went on line tried to find original it’s a Vernco, 28274DF where could I find that? Also where on the motor is the oil port. I believe back 30 yrs ago I use to oil it but my memory is shot. The motor is from St Louie Mo, USA. Model number K55RXRL-8033. Serial Num 30052. Any suggestions Ty
A proper belt at the proper tension is very important. Im not seeing anything online for that. A small motor shop may be able to help. As far as energy efficiency and CFM, it may be time for a complete upgrade.
amzn.to/3xNRrlP
You sistered them but what’s supporting the roof?
The top chord and bottom chord of the trusses are still in tact and continue to the peak of the roof. Only the web portions in that area were removed. The sistered in 2x are just reinforcement for the top chord in that portion for the roof support.
How much cost would be added to include a bath-shower? Thank you. 👍👍
There’s a lot to factor in that cost. I’d have to make the foundation larger in this case. There are a huge variety of shower options. You can do a simple insert kit for $500, plus plumbing to the macerator, could be as low as $1000 in materials plus labor.
I need this! Do you know of a contractor in south Lois with your skills?
I do not. Sorry
I have an older model of this fan. Mine does not have the smart App connectivity feature. After 7 years of operation, it stopped working. My unit has a 15-year warranty. I'm about to request for a replacement. Overall, I had been very happy with this attic fan. Hopefully, the newer, updated model will have a longer life span.
That’s a huge benefit to their long warranties
Awesom Job, I will check out the Contractors warehouse, never knew it existied thanks FR Lodi
I'm curious. One gable is on the northern side of my house which gets shade from a persimmon tree from about 1pm - 2pm onward. The southern gable is just above a metal carport roof. My gables are triangular, and I really don't want to box one gable in to get a "perfect" seal so to speak. I was wondering if mounting one of these fans in the middle of the attic, pulling cool air in from the northern side, pushing the hot air out the southern side would work? Granted it wouldn't be the most efficient in doing so, but my thoughts are with a high enough CFM, in theory, it should work. My house is just 1,000sq ft. and the roof is relatively low pitch, so the attic isn't that large. When it's cool enough in the evening, I use a 20" high velocity fan (5,000CFM I think) in one window, and open the others, works like a charm. I just need something to push out the attic heat when I can't open my windows. Thoughts?
It may help a bit, but because the air would take the path of least resistance I think it would just circulate the air that’s already in the attic much more than bring in fresh air and push out hot air. It really needs to be mounted in a way to force air in our pull air out.
@@m10stuff I appreciate your reply, I'll take your advice in to consideration.
It’s just amazing how very close your next door neighbors are, I couldn’t imagine your back yard all your neighbors looking in.
That’s why there are fences
Omg neighbors! For the love of god!
Thanks for the video. How’s it holding up?
This was in a house that was being sold. But I left them a business card and a 2 year warranty. I haven’t heard from them. I suppose that’s good news.
I just did this and there is no warning on my truck. Turned it off and on twice, went into reverse both times, no warning! Soooooooo much better!
Cool. Looks like they’ve done a software update in the last 2 years.
No rockwool insulation? I thought that stuff was best for sound and insulation
It is technically better. You’re right. It wasn’t so important to me to justify the extra cost.
What type of cost did you incur for this renovation
$2200 in materials and tool rentals
i use the negitive valve on the ROC pump after i deflate it to make it extra flat and easier to fold and put away! super awesome board though
Good idea
Im also from California (central California 90+ days every summer). How has this helped lower your home temperature/electrical bills?
I can’t speak directly to my electrical bills because I have solar. But I have tested it on consecutive 100 degree days. It does keep the attic about 7 degrees cooler. That might not seem like a lot, but that’s less heat radiating into the house from above.
My attic has only one gable vent, and the rest are soffit vents under eaves. It’s a metal roof, should I do the same installation as you did? Will it work?
Yes. It will pull air in through the soffit vents
Well! Do to this video, looks like we’re buying 3. LoL straight to the point. Ty
You won’t regret it
Look at him running like a little bitch.
would i need to re caulk the tub before i do this? thanks
Recaulk after doing this.
I guess you totally forgot to discuss the drain removal....
You are correct
Thank you! I did this mod but taped the speaker up with foam and spongy tape instead of removing it. It went from a level 10 to a 1. I wish the wire on that harness was longer so it could be left in a more accessible spot. You pretty much have to remove the tub to get to it no matter where you put it.
What was the cost of this project?
Materials were $6800 including the toilet.
Great video, love the yard and soccer goal too!
Thank you bro
Glad I could help
You’re my hero. More importantly you’re my neighbors’ hero.
Glad I could help
Does this charger works well with mach e?
Yes
@@m10stuff any additional circuit is required or same as ford charging station 48 amps?
@@geetsippy8234Ford Charge Station Pro is rated for 100 amp breaker
Just fixed my oven all by myself thanks to this video and your suggested Amazon part link! Thank you so much!
Awesome. Nice work
An absolute disgrace for the BO name.
I was very disappointed
What is the thinking behind not also adding vertical supports to attach to and bolster the effects of the 2x8 sister board rafters? Are they just attached to the original 2 x 4?
The vertical supports were already in place. I was only adding support for the roof load span. An additional support directly under the new 2x8 would be a good idea, but not necessary.
@@m10stuff You near Maryland?
@@leighdencker there’s a sign near my house that says "Ocean City, MD 3073 miles". I’m about as far away as you can get in the continental USA
You are brilliant. I have been trying to get a contractor to do the same with my similar attic space over the garage. New Laundry room. They said “take off the roof”. Your method is excellent getting joists to sister-in next to the trusses must take very precise measurement to properly support the roof. I’m going through my own "little door" after I finish watching your solutions.
Can you scrub this product? Will it chip or peel?
You can definitely scrub it with regular sponges and brushes.
Mine started peeling.
After how long?
Thanks bro'da Great video
Thank you so much for the video! Do you think it would be possible to roll up the backpack in a dry bag? If so, any ideas what size? No worries if not!
The backpack rolls up to about 12” long and 6 inches wide. Not too big
So how long until paint you poured in the bucket goes bad?
Only a few hours. If a third coat is needed, you may need an additional kit.
thanks for the review! these are a steal esp for the price even with the kayak accessory!
That’s a landlord special job.
Sometimes. It’s a very affordable fix to get more time out of the tub.
And it works.
@@m10stuffthats not the right way it will start pealing after first shower
@@josuetorres8414it’s been over a year and it looks fine
Buying me one man. Thanks
Will do. $500 for shipping 😃
Did you apply third coat, same day? With the original kit? Rustoleum says to wait til next day and use brand new kit - so curious if you did 3 in same day? Thanks!!
I did it same day. It was warm and curing quickly. The only reason you would need a second kit is because once mixed, it doesn’t last long.
Gave me a good starting point. Thank you.
LG! this should be fun lol
I found that the sanding it is the hardest part. I just used a handheld sander then vacuumed up the dust. 👍🏽 three coats later looked brand new.
Thank a lot for the teaching, enjoy your video
Hi can you send me this link because I’m not able to find it with the description link please
amzn.to/3UcAyJQ