Видео

Nice review! what size gear would I need on the motor for this frame with a 3500kv motor

Can you provide a link to the body you used? This rtr looks awesome

Hey man! I followed your vid and made the same ma-020 evo even with the atomic s.a.s! It works really well! Thanks for sharing your build!

Is the camber and caster adjustable?

I did this same conversion but with an mr03 evo board. The throttle response and power im gettjng is no where near as much as yours. Im using the kt531p transmitter. Is it possible the mr03 evo board is not suited for load of the awd? Also, can the board still power up if the battery leads are backwards? Any info would be great. Thank you for your time.

Do I have to buy another controller or can I use the stock controller ?

Will these batteries work just fine and safe in my ma-020?

Good day to you sir! Do you actually still using the 1.5v lithium battery? Is the Xtar 1200mwh lithium batta good enough for rwd mr03/04? Thank you for sharing!

My Kodama keeps chewing up the plastic bevel gear that is right before the differential. I've gone through 2 of them in a short amount of time. Have you experienced this kind of wearing on the bevel gear?

Hi, do mini-z ASF or MHS board with gyro works for these 2wd drift cars? Are the turning angle enough? I would like to mod the 3 wire servo to 5 wire for the mini-z board.

im still trying to build up the courage to assemble mine. Looks great! thanks for all the up close shots, ill have to refer back while im putting it together

If I did not want to budget what would be the absolute best esc & motor brand to buy for 1/24 drifting

Hay sir is this dsracing wheels?

What’s your favorite from all?

Have you seen the new rhino racing rts 1/28 kit? What do you think about it if you have?

I’m thinking of getting the BMR-X artr kit.

Hello got a XRX DPA because of your videos but just bought this TG racing chassis and would love to see a video of your setup and tips and tricks ?

Hii! What pinion and spurgear did you use for this mod? Thank you for the great 👍 video

Just wondering what gyro would you use on the ma030 for drifting? I have a std mini z awd r33 and it came std with a gyro but it has a 4 pin plug where as the ma030 has a 3 pin..

Will a mamba max micro brushless work in this car?

Xtar have a similar looking version of this charger called the L8.

I have the MRX chassis , what do you recommend as far as a ready painted body for this chassis. Great looking bodies for that model , I also order the chassis as well.

Do you still build and sell 🤔

What radio gear do you use with cars this small? Cheers

How do i get the under glow kit?

Hi , I really love your videos! I have a bunch of friends and we all so 1:28 drifting. But we also love to change out Chassis to racers, fit grip tires and do a Little Racing after the Drift Challenge. No Hardcore Racing. Just fun and carefully, no one wants to damage his drift-Chassis. And here is the problem. Most new drifters don’t have Open diffs. And Most Even don’t have the option to one. So maybe you could make a overview of Cars with Open diffs/closed Diffs with/without Option on open diffs and try, if one fits any chassis ?!? I really Like the TG Chassis, but I want a Ball diff. So I am thinking of buying one and trying to modifie a Ball diff from other to fit in. You do have all chassis and so all Diffs. So maybe you could look if Diffs are interchangeable somehow. For me, the TG would be Most interesting with Open diff. And I really think, there are lots of people out there, who want to know, if they could install a Ball Diff into their Drift chassis. Just an idea. But maybe worth to think of… Thanks

They're all so beautiful!

Promo-SM 😌

Is everyone still waiting on pre-orders? I just ordered yesterday from RC mart with ETA 4/20/24

Hello. Which servo do I need for this car? And battery? I plan to purchase one. 🤙🏻

Hello such a great vid, so I’m not a rookie to rc. I build 1/24 crawlers and 1/10th cars. I’d like to purchase a drifter but so many options out there. I truly get what you say hard to pick a favorite. So my question would be what would be a beginner drift car to drive. The building isn’t a problem putting upgrades not a problem. Not sure how much $$$ to throw into this but willing to pay for an all around drift car. I’ve watched a few of your vids and you’re pretty experienced so I value your opinion. My receiver is the Flysky gt5. So I’d like to continue with that. Not sure to buy a RTR or build from scratch. Help with some advise. Alex

At 7:02 : About the potentiometer, I changed in my MA20, the oem (brushed)mainbord with a mainboard brushless of MR03 VE, but the potentiometer are not the same. Now with this VE mainboard MR03 and my MA20 oem potentiometer, my car lost a lot of travel in the stearing. I tryed to use in parall 2 resistance of 33KR, but no change, any idea ? thanks in advance ! and congratulations for your channel !

Seems like a good beginner car, I'm on the lookout for something that fits mini-z bodies.

Is this good for 1/24 beginer? Or a good brand?

Good morning, could you tell me where I can find the front differential please? Thank you in advance for your help.

What all did you solder over to the brushless unit? Thanks.!

My assumptions, please correct me if I'm wrong : 1. Kit is too low, not enough play for suspension, other impact, there isn't much weight shifting/transfer going on in this kit 2. Front chamber too much, makes it so aggresive, quicker changes direction, but disadvantages for long wide drift 3. Outer front tires ackerman is so small, remember, drifting in RWD rear tires pushing forwards not sideways, so while turning outer side of front wheel needs enough angle to make curve or parabolic actions 4. Weight too much in rear, makes car easily spin like pendulum 5. Too much toe angle in rear tires ? same as point no. 3, rear tires pushing forwards, little bit turning, one side rear tires already pointing into a corner, I assume that's why real drift car not much done setting toe in for rear tires 6. Rear motor stuck with car body (trunk) ? 7. Tires not flat correct ? I assume it has less contact to track, less contact means less grip

Thanks so much for the detailed look at the car! Did you get around to adjusting it for 90mm?

All cls

I got these batteries for both my Mini-Z MA-020 and my Tamiya Mini-4WD stuff.

Because of this video I got a GL-GLA and went absolutely silly with all the upgrades and using it with a 2008 WRC Kyosho hard body. About the same setup as yours except I have a sensored setup and brass 94mm body to make it work with the 2008 WRC kyosho body. I ordered extra arms to do the same thing you did to get the extra ride height.

ruclips.net/video/ymW0Lwmw14Y/видео.htmlsi=rI4rckG_E21jHOMI

Nie lepiej zwiększyć wychylenie serwa przez 2 małe rezystory?

Got to appreciate the NB4 update. Super helpful video! Kind upf frustrating, 1 doesn’t do all, but it is what it is!

So I just picked one of these up as im converting a 1/24 model to RC, and it was advertised as 90-127mm wheelbase chassis.. but I cannot for the life of me get this car anywhere near 120mm.. Is there another adjustment I'm missing? I have the chassis extended all the way based on the four screws in the middle but it's not even close.

What’s the chassis?

Is that 1/43? Looks shorter than your normal cars

Love Shaggy 👍

Nice DRIFT