- Видео 86
- Просмотров 850 132
tcpHVAC/R
США
Добавлен 14 окт 2012
HVAC related fixes and tips.
Milwaukee vs Hart
Does the Hart wrench have the capability to hold it's position like the Milwaukee wrench can? I had to find out! This comparison comes from a viewer comment that Hart was as good but cheaper, not from claims by the manufacturer.
Просмотров: 979
Видео
Milwaukee Adjustable Wrenches
Просмотров 3,4 тыс.2 года назад
Do they hold their position? I'll find out! Made in Taiwan, by the way.
A Meter with an Ideal Price
Просмотров 16 тыс.3 года назад
Found a meter that has a cool feature, and can check a lot of things for little money. Not trying to convert the Fluke fanboys (I like Fluke as well), but show people that you can get a meter that'll get the job done for cheap.
Testing Daikin PVE Oil for Acid
Просмотров 3,2 тыс.3 года назад
You have to use the proper test kit for Daikin PVE.
Testing Blown Fuses and Saving $$$
Просмотров 4263 года назад
How to test and make sure you're not shorted to ground without using fuses and wasting your money. Link to the 5 pack which includes a 5, 10, 15, 20 and 30 amp resettable circuit breaker: www.amazon.com/gp/product/B07CGBVHMK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
Take 2: VRV/F Repair Practices
Просмотров 7673 года назад
Video about proper repair procedure for VRV/F equipment, non slideshow style, but video.
VRV/F Proper Repair Practices
Просмотров 2823 года назад
This video outlines generic guidelines when repairing VRV/F equipment. These practices are pretty much what everyone should be doing when working on any equipment using refrigerant. This is a guideline, and not approved by any manufacturer. And it also assumes you have had proper training.
Milwaukee 2502-20 4 in 1 driver
Просмотров 5813 года назад
Little overview of a new driver I picked up, thought everyone would like to see what it's all about.
Nitro Saver
Просмотров 1,2 тыс.3 года назад
New nitrogen purge tool, simplistic in design, and works well, I have tested it. Saves nitrogen as well as the UniWeld one that is bulky and fragile.
Actuator Tear Down
Просмотров 2 тыс.3 года назад
Tear down of an outdoor air damper actuator. Tore it down, tested it to see if I could determine what kept it from working.
Actuator Trouble Shooting
Просмотров 1,4 тыс.3 года назад
How to trouble shoot actuators that are on RTUs, or even ones that are in classroom unit vents.
MicroTech III Controller: Repair or Reject?
Просмотров 5 тыс.4 года назад
Taking a field damaged controller and seeing if I can salvage it enough for bench use.
Tools Revisited
Просмотров 5894 года назад
Update of how my insulated screwdrivers are doing, and a little bonus tool storage footage towards the end.
Low Loss Core Depressors
Просмотров 9 тыс.4 года назад
Something I use everyday, and have never regretted finding this tool! 5'16": www.amazon.com/Valve-Co-Thumbscrew-Depressor-CD2080/dp/B071J3GW7Y/ref=pd_sbs_328_5/144-2354033-6813059?_encoding=UTF8&pd_rd_i=B071J3GW7Y&pd_rd_r=7579b070-09bb-42a5-a362-a98d79675b92&pd_rd_w=6Xr38&pd_rd_wg=Uurmt&pf_rd_p=d28ef93e-22cf-4527-b60a-90c984b5663d&pf_rd_r=G0JA69ZJ3ECVRHB0213Z&psc=1&refRID=G0JA69ZJ3ECVRHB0213Z 1...
Navac NEF6Li. Is it worth the money?
Просмотров 2,5 тыс.4 года назад
Is the Navac NEF6Li worth the money? Isn't the manual orbital tool just as good, and much cheaper? I review the tool and explore that question in this video.
Klein Insulated Screwdriver Set 32288
Просмотров 2,6 тыс.4 года назад
Klein Insulated Screwdriver Set 32288
What's in the Toolbag? Milwaukee M4 Screwdriver
Просмотров 26 тыс.4 года назад
What's in the Toolbag? Milwaukee M4 Screwdriver
Veto TP-XL & MB3B Load Outs and Options
Просмотров 30 тыс.4 года назад
Veto TP-XL & MB3B Load Outs and Options
Thank you
Really good video!
They're great wrenches but the jaws are way too thick
😮
I just purchased the product “Digital Torque Wrench 60648” My wrench came with a single adjustable head (the smaller one) In the manual the following text appears: Applied torque at setpoint = Entered Torque Setting * • For ratchet head 1 • For adjustable head 0.782 • For large adjustable head 0.75 This text is very ambiguous and raises a few questions: 1. Do I have to adjust my set value by a factor of 0.782 (i.e. if I want 25 N-m do I need to set 25 * 0.782 = 19.55 on the digital display) 2. Or was the wrench calibrated using the adjustable head it came with such that the displayed torque value is the actual torque value at the head. 3. If I later purchase the ratchet head or the large adjustable head do I need to calculate the torque setting using the factors described above? 4. If I change heads is there a way to tell the wrench which head is installed such that the wrench calculates the correct torque using those factors? I just used a quinn 3/8 drive digital torque adapter to test this and it does appear that 10 ft-lbs on the quinn lands close to 7.8 ft-lbs on the yellow jacket.
If the manual states what you just listed, then yes, you would multiply and adjust your setting. I don’t recall seeing that in my manual, and I haven’t had issues with using the set torque, but they may have done more extensive testing and found the multiplier was needed for accuracy.
Genius
This is perfect for reviewing it before I buy one for HVAC purposes. Thanks for sharing this!
Please, can you provide a diagram of the testing device
The testing device is a Fluke 87V meter, on diode mode.
I work at Skidmore as a lead machinist as of 5.5 years ago. I love it. Been making a lot of improvements. Absolutely fantastic company to work for.
Same size wrenches make a difference no?
Please I want to buy 1, how can I get it?
Man i had some manufacture training and you are way more interesting
And now I work for a Daikin manufacturer rep. Thanks for the compliment!
Excellent! 🔥🍻🔥🚒
Sure would be nice if you could measure 10amps or less with the test leads.
Sure would be nice if you weren’t so demanding. 🙄😆
Can you please do a video on how to replace and configure new controller
Great video, however you don’t need to cut the unit open or remove the sides to access the eev, there is a panel that all the wires are strapped on, remove that and you have instant access to the eev without cutting anything open, all work can be performed inside the unit, hope this helps
U but the pin in on the wrong side
Yup
Haz anybody used the navac multímeter? Im between this ideal or the navac
Haven’t seen or used that one, but download their respective user manuals and compare specs. They’re evenly matched as far as price point, the display on the bottom of the Ideal gives it a slight edge for me.
@@tcphvacr9950 still not sure, my between this Ideal 61-757,Navac NMC1, Klein tools CL-445, and Fieldpiece SC260, which one would you recomend?
$146! Jeez pre inflation price! They are close to $300 now lol
😂 That was 9 years ago.
were u get the that inverter checker from. Ta
From the local Daikin Service Representative. They don’t make them anymore, but Refco makes an inverter checker now that does the same thing, and it’s much smaller, will fit in a tool bag. Here’s a link from Trutech Tools, much cheaper than Amazon: trutechtools.com/Refco-Inverter-Check-Kit-wData-Flow-Monitor_p_4930.html
Best videos on Daikin VRV on RUclips!!!
Since so much problems with this brand, changed with other brands, now no problems!!!!
Regarding Ideal 61-747, when you are in diode mode, and there is a short, does it make a beep noise like Fluke 87V? I am talking about when it is in diode mode. NOT in Continuity Mode with noise. Thanks.
best
Will it do in-rush?
No.
Only outrush 🤣
Gracias por el video.
Great video, I have the rothernberger mechanical wrench and it’s a bit difficult to set as you have to turn the handle and the numbers are not clear as different numbers mean different things! You also have to make sure you use it the right way round, as if you go the wrong way with it it doesn’t click out and you can over tighten very easy to do on a long day and in the dark working from flashlights😮 this would be much quicker gonna buy one many thanks for showing its features! The memory storage will save time massively especially as I only work with Mitsubishi 👊👊👊
can these effect pressures at all? I had two tune ups on ac's that had the exact same sh/sc and pressures....
The only issue with pressure you would have is if it doesn’t depress the core. If your pressures were proper for the unit (eg. If you had 110/280 pressures on a 410A system), the reason they were the same was the fact the conditions were very similar on each job.
@@tcphvacr9950 for 3 units i serviced, they were just under 100/200..
Puta madre, I don't know what's wrong with the people. The title of this video is about the tool bag, but nothing about the bag.....only about tools
It's garbage try to get it a bit weet and see how it will work you showing only on dry pipes like every plumber has to work on only dry pipes mine stoped working after cutting some pipes on a boiler that had some water on them after getting wet from cutting the pipe it stopped working who designed crap like this that never tests them out on the real field in different situations
Why would you use black lead for positive and red lead for negitive?
I wouldn’t if polarity mattered.
Thanks for the video It made buying it an easy choice. I picked it up at Lowes for $44.
I don't believe You Skippo!?
Where can I purchase all of these parts?
I have this exact same Armstrong circulation pump, and it has stop functioning. As such, I would prefer just to rebuild it, but I do not know where to purchase the needed parts.
I use appions version of this. I havent seen any refrigerant since i got them
I picked up 4 of those recently myself. They are excellent. And they are vacuum rated, and have already used them to evacuate 2 circuits on a roof top unit.
I've invested in the Knipex Pliers Wrench, they've semi retired my adjustables...........
I’m a big Knipex fan, but for the caps on the VRV equipment I work on, the Milwaukee wrenches are pretty good.
@@tcphvacr9950 That’s interesting. Is that because the Milwaukee are so good, or the Knipex are lacking in something ? I have Bahco adjustables, a 4”, two 7” wide jaw, a 10” and an 18”. They cost around £250 a significant amount, but only the 18” one can do what the Knipex can’t. I have the Knipex in 125mm, 180mm and 300mm. The 300mm ( 12” ones ) can’t do what the 18” Bahco can so unless I get the 400mm Pliers Wrench ( for leverage reasons only, but thinking about that the Knipex can open much wider at 83mm versus the Bahco at 53mm ) I’ll always need the adjustable. 👍
We want the test kit shop sftess
Hello, I would like buy this clamp meter. Can you share me your experencie? I see this video is very old, so i think you use this meter lots of time. Everything is fine this clamp meter?
I prefer the Fieldpiece SC480, it has the rotation function for three phase, and doesn’t require an extra lead. The Amprobe also has a limited resistance range of 60,000 ohms, which limits testing some temperature thermistors. Other than those two reasons, it’s a good meter. The ability to read amperage at the tip of the clamp is a cool feature as well.
@@tcphvacr9950 thank you so much. I think the Amprobe 320 is suitable for me.
I've always loved the ideal meters
Those terminations on that terminal block are apauling,there should be NO copoer showing.
How much cost microtech controller eng Mansoor Iraq
Around $1800 USD.
@@tcphvacr9950 thnxs more in which agent u sealing it
Can I get address for sealing please lead me
If I remember correctly, the identical red ones are for the compressor's crankcase heating elements. They are interchangeable.
The crank case heaters are specific to each compressor, they are turned on and off based on conditions for each compressor. Switching them could cause damage.
@@tcphvacr9950 I also rather keep connections as they are set in the factory... but what you mention must be model-specific. The Daikin VRVs I've serviced all have crankcase heaters on full-time. As a matter of fact, the manual states that turning on the equipment in cold weather requires pulling up the mains six hours earlier to ensure all compressors' oil is on temperature.
@@tcphvacr9950 I guess we can follow the tracks in one A1P and see if they are switched by independent mini-relays, or if they are both turned on by the same one.
Thanks. I was just looking at buying that meter. I heard it is a little bit heavy. I am not sure whether I buy this or a klein. I heard that Klein is now made in China and I prefer to buy in the US. I support workers here. A big thumbs up and I subscribed. I think everybody should.
Weight doesn’t seem to be bad, but it is bulky on the clamp end, but if you’re not getting into tight spaces, that won’t be an issue. They also make a magnet strap for the Ideal meters, which is nice if you want to hang it on the side of equipment. Thanks for subscribing, and the compliment!
I had a Klein meter thing was garbage and got chucked - literally
hello can you help me set code 238 in my vrv 4 loop binary system?
I’m pretty sure hart is made by Milwaukee
In the real world, what would be supplying the control voltage to the actuator?
24V source from either a roof top unit, or transformers in a control cabinet.
my Hilmor is magnetic as well 👍🏻
Appion was mum when I asked them about borrowing Hilmor’s idea. I’m a big fan of Appion CRTs, but the magnets they use break ALL of the time. I took a Hilmor magnet off of theirs, and it hasn’t broken yet.
What do you think about these Cresents after using them for a year now ?
I really like them. They don’t back off, so they’re nice to use on jobs. I use them quite a bit on taking the service caps off of VRV equipment.
А чё маркировку процессора и флэш память не показал?
Does anyone know what is the lowest dc current this meter can measure ? Will appreciate if someone can share this information.
It has a 40 amp and 400 amp range, with a resolution of .01 at the 40 amp setting, but I’ve not proven how low it can pick up.
Will they hold a deep vacuum ?
If you get the bigger ones that can backseat and keep the gas in a hose, maybe. I’ve used one out of necessity on a unit vent compressor, there was no way to get a core tool on it, and it did okay.