CONESET/STEERING STEM BEARINGS REPLACEMENT ON A HIMALAYAN- TIMKEN BEARINGS AND RACE
HTML-код
- Опубликовано: 19 сен 2024
- A detailed walkthrough of the coneset/steering stem bearing replacement on my Himalayan. This is the first time i have changed my steering stem bearings.
I did my own coneset/headset servicing today after watching your very informative video. Thanks so much! I also replaced the bearings with Japanese products - I chose Koyo bearings as the quality:price ratio was just right.
Thanks again!
Glad to hear that you did it yourself 😊👍
I had done it myself with NTN after tired from RE Guys. They changed them two time . 1st after 10000KM . 2nd after 5000km. After mine work its being 13,000km and 1year still going good without greasing it.
It is not the fault of the SKF bearings dear brother. It is about wrong adjustments or poor maintenance habits
Great video, at 3:35 if I run into a stubborn race that will not come off the stem I cut them off with a Dremel tool and a tiny cutoff wheel. Cuts right through it like butter.
yes , that is the better way . i agree.
It's a whole new experience to watch ur channel am surely gonna try this...if possible can u share the link of those bearings...for the benifit of all
The bearings are automotive quality 30205JR/30205J KOYO Narrow Section Steering Head Set Taper Roller Bearing 25x52x16.25mm. Just find a bearing dealer and type in 30205 - this is the standard for the bearing size. I chose Japanese over any other manufacturer.
Also, you should go for a Nilos seal for the lower bearing. Serial number 30205AV (Nilos Ring for 30205 Series Bearings 25x49x3.6mm)
Tim
Wonderful job Ben. Himalayans from stock have cheaped out headstock bearings. TIMKEN and FAG are great bearings. Using good quality waterproof grease and dust cover, should make it last a long while.
My bearings lasted 33000 kilometres only because of good maintenance habits and I for sure know that nobody understands the primary differences of an adv dual sport style motorcycle and it’s maintenance schedules. That is why so many have problems with their motorcycles .
@@ONTWOWHEELSBEN Indeed.
Easy way to replace the cones is to put the new ones in a freezer they shrink and pop in easily, very good video well done
Great tip! THANK YOU
So that when it dries the frozen water will melt and create more problem
Ben , I own a r15 v3 . Rode almost 34000km. My handle is straight when still. But when I ride it's slightly off to the right. Any idea what may be the issue here .
Twisted forks . Get it aligned .
Ben feuel cap o ring complaint replace cheyanm Do you know place where this spare is available. Could please help me to buy this spare ?
Why u removed aom nylon cap
What's the price of this bearings?
Lovely job
Where can I get waterproof grease ??? Help me out
amzn.to/3LIB2AB
Very helpful. Thanks
You're welcome!
Nice video! Great bro!
Bro ente himalayan nte front cutter il irangumbo nalla shake um nalla sound um und oil seal idak maari cone set um maari ennitum ath marunnila
Bro what's your view on Himalayan 450
Bro ith ewide aanu cheyyunnath
Fantastic 👍
Ben🤗,
ഈ timsun tyre ചെന്നൈ എവിടേലും കിട്ടാൻ ഉണ്ടോ (rear one ).
Hi Ben ,
I have installed NTN bearings on my Himalayan, i am facing axial play when move on a road hump or pot hole. What might the issue ? Can you help me please.
Adjuster adjusted loose. Lock nut too loose
From where to get timken bearing???
What about the AOM nylon cap you used before?? Is it not good anymore to reuse it?
It was on a friends bike
Can u please review the Amsoil that you have used recently .
You can trust Amsoil it's reliable, i use 15w60 for long rides no over heating issues, smooth gear shifts...change interval upto 8-10 depends on your riding condition
Hi Sir, I saw this one on amazon and the reviews are good, should I buy this one? "NTN Bearing 30205 Tapered Roller Bearing Cone and Cup Set, S" and will this fir himalayan 2021 models?
amzn.to/3n8kuYh
Same bearing can I use for RX100
Mechanic is Very very good and polite person.....
Can I get mechanic shop address Ben iyya ?
PLS GOOGLE KICK START GARAGE
@@ONTWOWHEELSBEN nandrigal iyya ❤️
Have u removed your blue coloured bearing cap? From art of motorcycles
Kindly Watch the video
Where are these guys brother
Can we take upper and lower cups measurements for Stem coneset bearing wnd get replacement Taper roller bearing..
My motorcycle (Apache RTR) has ball bearings wanted to replace with Taper roller bearing
No..ball bearing is better one
@@shaikshakeel2693 ok.. but for most off-road motorcycle Taper bearing is used as it will provide more contact area(less stress) and smoother opration..
@@ramankr4712 so..u wanna go offroad with your apache
TVS Apache is already in rally with proper mods... And With current Indian road conditions, we are halfway on that 😁... Anyway wanted to these type of bearings once
Sir..I am having Himalayan BS6 purchased on jan2022 in 2 months 1600km driven now after first service i am getting some breaking noise on front portion from top to bottom while running on pothole but the noise is not coming when riding on speed braker and normal road however due to right side pulling issue i informed to adjust in service centre from that day the issue started ...can you please suggest how this can be resolved now i went more than three times to service centre still this issue not yet resolved 😐 they are saying in Himalayan this sound will come due to its natural bearing settings. Kindly suggest they are right or wheather they are compromising me.
same problem in my himalayan... just completed 1st service, some clicking sound is coming from front when running on small potholes , I checked it with local mechanic... he said it is coming from wind shield, but i am definitely sure it is not coming from wind shield bcz I rod the bike by keeing the wind shield by one hand tightly...., something is losse in the front part, (instrument cluster or handlebar or forks... don't know 😅?)... Mr.Ben plz suggest something..
Definetly from meter cluster guyz .. go and change it under warranty
The click sound is due to loose wheel spokes
I can help with that issues...just a minor one
Total cost?
Can you please suggest a ball racer set for my himalayan bs4?
get the NTN or TIMKEN
@@ONTWOWHEELSBEN should i order it from amazon or arts of motorcycle?
The prices have a hell and heaven difference,
In amazon they write origin of product is from china but on the packet it is made in japan
In Himalayan frequently spoilage of cone set is an engineering defect .
We have permanent solution for this defect.
Only one small step can permanently solve this problem. Any one who is facing this problem can come to BHOPAL.
Workshop location bro
from where you get that bottom sealkit i was searching for that
if you have any contact then please give the contact
You get it at the RE service centre, at spare parts section
Ben where is this garage
Kickstart garage in Chennai OMR
cone bearing no please
Malayali 🥰
Bearing model number and oilseal number
Thanks bro 🫂
They are doing it wrong way for opening the bearing n they even spoil the cap.