Injora 4mm Extended Diamond Axles For Traxxas Trx4M
HTML-код
- Опубликовано: 20 янв 2024
- #injoraDiamondAxles #traxxastrx4m #injoraIR40 #injora #injoratrx4mDiamondAxles
Hi everyone.
Thanks for joining me again on another upgrade video, and today, we are definitely going to be installing something that I have been looking forward to for awhile.
The new 4 mm extended diamond axles from Injora!
As we all know, they look amazing and in this video you’re gonna see me do the installation and sort out a few issues I had with them from the factory.
All in all, I think it’s another amazing product by Injora, and I just think I had a few issues due to the rush of trying to get these items out.
The quality of the machine work on the housings is outstanding. they just need to do a little bit more quality control before it leaves the factory.
In this video, I don’t get to take it out for a test at the end. Due to the bad weather We are having over here.
So you gonna have to wait to see them in action.
For all those that actually enjoy my content. Please don’t forget to like, subscribe, comment and even smash the bell! as it all really helps my small channel get out there. And the best part is, it doesn’t cost a cent!
Thanks 🙏
There will be a link below to these awesome new axles from Injora.
4mm Extended Diamond Axles
www.injora.com/products/injor...
Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=... 
Развлечения
Thanks for this video. Nothing seems to come with instructions so your videos are golden!!!
Thank you Mark, I really appreciate the awesome comment and feedback.
I remember how complicated it was to figure out how to fit some of these parts, that's what made me start making videos like this.
Have a great day bro, and I hope to see you again on another one.
🤜💥🤛
Nothing better then fixing a brand new part.
I believe these should come as a kit.
Exactly just when I thought I had an easy job it turned into quite a big job!
A 10 minute video turned into a 25 minute video! 😅
You know what, it would be awesome to buy it as a kit and I assemble it myself! 💯💯
Really appreciate you watching and leaving a comment
Thank you 🤜💥🤛
Thats what happens when you buy from well you know the place😂
@@ass1racing_869 🤣
I wish everyone that watched this video could give this man a thumbs up!! Launch this guy's videos into RC universe!! These are the most well thought out, educational, instructional videos out there! So much time and effort! Thank you for all you do for the community! You are so honest, If it works it works, if it doesn't it doesn't, If it's crap, You tell it like it is.
I've taken the one second it took to click the 👍 button.
I made a comment! I'm subscribed! I mean, why would I want to miss future videos?!
🤷♂️
All the time I've been running this RUclips channel! I have never had such an awesome comment!!
I truly appreciate you, taking the time, to like, watch and write this awesome supportive comment.
Wish there was more people out there that appreciate the effort.
Thank you so much, I hope to see you again Craig 🤜💥🤛
The look great, just hope Injora gets better at quality control of their parts!
Totally agree they look awesome! but they definitely need a better quality control system because, this is just annoying.
Or sell it as a kit! so you can assemble it yourself.
I've bought two sets of Injora wheels and two sets of Injora tires. One set of wheels was missing the brass rings and hardware. One set of tires packaged wrong The other set completely missed picked. So far quality control doesn't seem to be a thing at all let alone an issue.
Wow beautiful axles, Yep I was here watching catch on the next one
I totally agree bro they look amazing and their performance is outstanding.
This has been a really amazing build, and its performance is out of this world!! I am amazed at some of the obstacles it can take on with ease.
You have an awesome weekend and I'll catch you on the next one.
Real cool axels cool build ,
Thanks buddy I appreciate that
🤜🤛
And thank you very much for watching and commenting ✌️😉
Keep up the great work and thanks for sharing with us!!!
I really appreciate your supportive comment 🙏 I will keep trying my best, thank you very much bro
🤜🤛
Just do what you do… you are doing great!
Nice axles!
I learn so much from your builds
Thanks man
They really are awesome 👍
Those are truly inspiring words so thank you very much I'm glad my content is appreciated.
And I in return really appreciate you watching and taking the time to leave a comment.
Thank you very much 🤜💥🤛
Bro i love your vids. Thanks for all the vids and info you provide!
Bro thank you so much for your awesome comment!! It's awesome feedback like this that makes all the effort a person puts into these videos with it.
Seriously thank you very much for watching and taking the time to comment.
🤜💥🤛
Nice looking vehicle and happy to see you go straight into the truck bag to make the problem go away! Improving at its best!!
Thanks bro 👍 you got to do what you got to do! That's what I love about this hobby, you never know what's going to happen.
And a little challenge is always welcome. 👊😉
I really appreciate you watching and taking the time to leave a comment.
🤜💥🤛
Those are nice. I ordered me a set of them. Can’t wait to get them and try them out.. thanks for making a video on the axles 🦾🫡
They really are! and you will not be disappointed 😉👍
And it is a pleasure!! Thank you bro for watching and taking the time to leave me a comment.
🤜💥🤛
@@rcfungames all support brother 🫡
Thanks fr this new vidéo. I am waitting for my and hope il not have same problème. All your vidéos are a nice help for me specially about shocks setting. MERCI
It's a pleasure ☺️
Thank you so much for watching and taking the time to leave me a comment ✌️😉
I'm glad the videos have been helpful, just hearing that, makes it all worth the effort 😁
Merci beaucoup 🤜💥🤛
Hello,
Nice and interesting update!👍
Greetings Seven🖖
Hello Seven 👋
I am glad to read that you find this kind of content interesting 😉
As soon as my new batch of stickers are in, I would like to send you a selection 😜 for all the awesome support you have given me over the years.
Greetings Ryan 🖖😊
@@rcfungames 👍
No channel better on UTUBE.👍
Now those are some words that I truly appreciate!!! thank you so, so much bro 🤜💥🤛 ✌️😊
I like the build content!! Subbed 👍👍👍
Bro I'm glad you like the content! thank you so much for the support, I really appreciate your sub 🤜💥🤛
Very Nice and Cool Upgrades my Friend!
💪🏻🐼👌🏻
Thank you bro, they look awesome, just a pity I had a few issues!
I really appreciate your visit and comment 👊😉
You are Welcome my Friend 🐼👌🏻
This is crazy, I have watched all of your injora videos and I too myself am dealing with injoras poor quality control, I’ve had almost every issue that you have, like with the carbon chassis not fitting the high trail, bent axles and my 70mm swamp claws have ripped at the bead on almost every tire with light use on INJORA wheels lol.
We must be getting from exactly the same batch 😅
It can definitely be annoying but it is always nice to have a little challenge!
Now, the tires ripping on the bead!! Is not good! I noticed that the other day I had a ripped bead on my bronco! And those tires haven't really run very long! So this is definitely something to pay attention too.
I really appreciate all the support you have been giving me by watching my videos 🤜💥🤛
Thank you very much bro!
👊😁
Well I see why people enjoy your build videos. Your camera placement is excellent and the focus is fantastic ... you can really see what you are doing. Highly entertaining and educational.
By the way .... there is no shame in wearing gloves when working. At my hobby desk I have a massive box of blue vinyl surgical gloves and I always put a pair on if I'm working on things that will require grease or oil. And since they are rather tight I loose very little dexterity. :)
Good to know that Injora's customer support is good ... as 3 massive QA errors is really discouraging. I'm sure those parts are both pricey and take a while to get.
Great work as always ... you really are improving the RC hobby, holding companies accountable, and drawing new people in. -- And damn that vehicle is exquisite.
I promise I will watch more of the build videos but my favorite are still the driving ones :)
Man bro thank you so much! What an awesome comment!!
I truly appreciate your support means so much to me.
I agree I still prefer the trail videos myself 😉
And don't worry there's a lot of them coming!
I've got two more to put up over the next two days and I've got another hole Trail I've got to edit.
And some way in the middle I'll be squeezing in another unboxing ☺️
I hope you have an awesome day bro! and thank you so much 🤜🤛
@@rcfungames Thank you so much for the replies ... I'm sure you have lots of comments to review. Have a great week.
Vraiment bien les options 😊
They are really awesome! Really happy with them.
thank you so much for watching my friend 🤜🤛
Injora living up to their name😂 good stuff man. Subbed immediately 👍😁👍
Oh yes! they certainly are!!
I didn't have much luck with the lcg chassis for the high trail either.
This was clearly a lack of attention by whoever was assembling.
Thank you so much for subscribing bro it really means a lot to me.
🤜💥🤛
A good job!
Thank you buddy, I really appreciate it ✌️😉
@@rcfungames
👍
That is a beautiful thing
Thanks bro, I also love the way it's turned out 😁💯💯
I have almost a complete injora build trx4m. I have noticed quality has gone down. I never had issues until with any of the parts except some screw holes for body panels on my tarantula. This is the last part but now im a bit hesitant.
I purchased from them the whole year and I only had a problem with the high Trail trx4m carbon chassis and I had a little issue with these Diamond axles but it wasn't anything to do with the quality of the build but the actual assembly line used the wrong parts.
The parts were immediately shipped to me so I have absolutely no complaints.
So far out of all the brands I've tried they've got the best customer service and the quality of the parts are superior to many others at the same price.
Sounds like you've got a really awesome build going there!!
It is normal for a person to be concerned but so far I only know of two people that had issues with these axles.
It really needed that extra width , looks way better 😊
Oh yeah on a truck like this you definitely want that extra width!
And I've got to say it performs really well.
Running footage coming soon.
Really appreciate you watching and leaving a comment, thank you very much 👊😉
Another nice vid! Injora really dropped the ball on the new axles. They look amazing, but that's totally weird that the front had one axle shorter than the other and the back had a axle that was too thick! At least they have good customer service. Lookin forward to the running vid, once the weather allows you to get out.
Thank you Jonathan, I really do appreciate it 👍
Yeah they look amazing it's just a pretty I had to do so much for them to be able to go on to the truck.
Definitely the back one I can't quite understand what went wrong there but I'm assuming it wasn't machine to 100% correctly.
The front one!?/! I don't even know what happened! But somebody there needs a whack over his head 🤣
Luckily we've had some really good weather for the weekend so we're running video should be up tomorrow ✌️😉
Thank you so much for watching and always taking the time to leave a comment.
🤜💥🤛
Nice video.
Thank you very much, I really appreciate you watching and taking the time to leave me a comment. 👊😉
Another great video, and it is interesting to see that you had that problem. Another channel had that problem with the front axle being short. The truck looks good 👍 👌
Thank you Austin, they can definitely do a little bit better quality control before letting the items go.
That's interesting could you tell me which channel please?
I'd like to go check that out.
And thank you I also think it's turned out great.
Running footage coming soon 😉
I just received my blue Toyota FJ body...love it. I noticed the lack of, "Guys". Cool...
Awesome bro you all going to love this body!!
I'm trying dude!! I'm trying!!
I really do appreciate that you keep watching, even though I'm so annoying! 😅
Thank you 👍
Nice build as always. It seems like the universal lcg chassis sits a bit higher than the specific lcg chassis even with same shocks, tires, ir40 bodies, and shock mounting positions.
Thanks bro, I really do appreciate that.
So far I am really happy with the universal lcg chassis.
And I really like the way the body sits on this chassis.
I haven't really paid attention to that, as I fitted mine to the universal chassis but I will look at some pictures to see if I noticed a difference.
Thank you for watching and commenting bro.
My front axles came with the doffs installed backwards LOL, my axles turned into eachother, I double checked I had my orientation correct, I took the front housing and inner shafts apart, flipped it and it was mint, quality control is a little off, not sure if it was just mine as I bought them the day they released, maybe early production issues
That sounds about normal!!
I got a feeling this one guy working in the factory what has no idea what he's doing!! 🤣🤣🤣
And we must be the lucky ones that keep getting the ones that he assembles 🤣🤣🤣
Thank you so much for watching and commenting bro, I really do appreciate it 🤜💥🤛
Could they have welded two shafts together to make up the extra 4mm instead of just having a brand new original 4mm long shaft? That hump in the middle area could be where they didn't take the weld down to the stock sized shaft?
I hope these get better because I want to order a set.. thats some terrible quality control..
Thanks for the good video.
No bro from what I saw on that shaft it looks like when they were milling it they didn't go right through the shaft and left a high bit.
At the end of the day I can see how that happens because let's just say the tip on the machine was getting worn out they didn't notice it and it didn't cut low enough.
But having a normal drive shaft inside an extended axle is a massive lack of attention to quality Control!
I would still order a set because I'm pretty sure it was just my bad luck.
I have only heard of one other person that has had the same problem.
I still love all their products I just wish they would pay a little bit more attention to quality Control.
Don't let it put you off buying a set because they are amazing.
And for the price pretty much unbeatable.
I also want to say a massive Thank You, for watching and taking the time to leave a comment bro.
🤜💥🤛
Great video as always love the new axles but I’m gonna wait until Injora fixes these axles
Thank you bro, I appreciate it.
And yes they are amazing axles but they definitely need to check them before they send them out!!
I haven't even had a reply from them yet because I guess they are on holiday!
I’m getting the MB 1Hunnid for my bronco does that six channel in Jora receiver controller combo have the ability to adjust steering to make sure you’re getting Max Angle?
Yes, these are my go-to receiver transmitter combos!
They work really well and have got plenty of adjustments for you to set up how far your servo can turn.
You can set it from the controller.
You can also control your lights with this unit from the controller
And One controller can be paired to 10 different receivers.
I will soon be doing a video on this controller to show all its features.
Very good vidéo 👍 IS nice 😉🇨🇵
Thank you very much bro!
Greetings from Portugal 🇵🇹 🤜🤛
Thanks for the video ! Would you advice the previous axle you had or the diamond ? I'm about to order one ? I have friction issue with the stock. It's shaking when I steer passed a certain angle. Would it fix it with any of those ? Thank you very much !!
Both axles are amazing, I do think the diamond axles are better for overall performance only because the shape really helps them slide over obstacles.
Yes the stock axles aren't great especially when trying to turn to the max angles!
You will definitely notice a huge improvement with these axles.
And thank you bro for watching and commenting ✌️😉
Awesome axles. But honest after seeing this and the issues of the carbon chassis i wonder if they dropped their quality standards. Ok you fixed the problems again and it runs fine. Send Injora two mails about the too narrow tubes but got no answer yet. So i'm a bit worried to order. The axles sure looks nice and fit perfect under the F 150 High Trail. My Chevy is at least complete. Btw, the weather here is also terrible. 😊
They really are awesome and it's a pretty I had so many issues.
Sick of making videos and having to feel like I'm being nasty about the product.
All in all it's only been two items so far over the last 12 months that I've had issues with!
And yes even though I discussed the issue with the lcg carbon fiber chassis with Jeff from Injora! He never suggested to send me a replacement! ???
Anything else I've ever had an issue with they have been very quick to send a replacement so I find it a bit weird.
Let's see how it goes with the replacement parts for these axles!
I'm glad you got your high Trail all done and I hope you making the most out of it 😁
Thank you for watching and always leaving your comment.
🤜💥🤛
Great video! I can’t wait to get my diamond axles. I am going to do a ground up ripper build and want to use these axles, I want to get spare axles shafts when I order, what shafts work with the diamond axles?
Thank you very much, you are definitely going to like these axles they are awesome!
And it sounds like you've got an awesome build in mind 😉
Now the axle shafts you would need for this, are the 4 mm extended version.
But for now they are still not available for sale!
I will inquire and find out when are they going to be available for purchase.
I am sure if you contact Injora and tell them you want a set of extended axle shafts they will sell them to you.
But as of right now they are not available on this site.
Lots of people are looking for them as they have been them or just want a backup set.
Hopefully they will have them available soon.
Thank you so much for watching and taking the time to leave an awesome comment.
🤜💥🤛
I’ve been watching every video I can of the Injora /TRXM build with new body. I’ve watched most of your content on it I was going to buy the new TRXM High Trail Ford but decided to wait I have a TRX M Defender with some pretty decent upgrades I like the body for what it is but after seeing the new Injora body & how people where building them I decided to build one up. Is there any difference between using a Bronco or Defender as a base chassis? I did spend a lot on Injora parts for this build but man they just look so good. I purchased the Body of course aluminum lay down servo axle kit with rods, carbon frame, Injora new esc, underdrive transmission with 180 purple motor, shocks, Injora 1.2 wheels n tires, front brass knuckles probably a few other things. I’m using the Defender as a base chassis it already has high clearance red aluminum links & steering rods & Reefs 99 servo.I plan on using my Flysky 5 as my controller so I’ll have to get an extra receiver. I decided I better get everything ordered before the holiday when they shut everything down for 2 weeks I hear people saying they get their orders in a week or less but apparently it depends where you live I’ve placed many orders I live in the US & it takes forever & ever for my orders to get to me I track them & see it going through a bunch of different stops n checks. It’s always worth it but I’m not to excited yet because I’m like 2 weeks out probably before that order lands on my door step. Any tips would be appreciated & I hope I got everything I need I’m watching videos again to make sure I got everything & also see what issues arise during the build the body mount itself looks pretty basic & adjusting the rear mount or flipping it helps lower the back. I’ll probably watch your videos all over again. Thanks for helping me when you didn’t even know ya did.👍 🤙
Bro thank you so much, this has got to be one of the best comments I have read in a long time!
It is so nice to hear that somebody really appreciates the hard work and effort I put into these videos.
From what I have heard it shouldn't make a difference if you use the defender or the Bronco chassis for this build.
It sounds like your Defender has already got quite a few upgrades, and it will make a great base for this build.
If you've got a flysky 5 controller then you are set!! Just need to pick up a receiver and you're ready to go 😁
Other than that it is actually quite a simple build.
And depending on how you want it to look at the end! Will determine which way you want to fit the rear body mount.
I like to keep it as low as possible which did make it more difficult to fit all the electronics.
I've got a whole bunch of 3D items that have to be fitted to the rig and I will have to find new locations for the electronics once again.
There is not a lot of space under the small body.
Besides that I really like the quality and simplicity of these builds.
I can't think of anything off my head, that I can say to you to help you out! but if you run into any issues feel free to contact me and hopefully I'll be able to help.
I really appreciate the support you've been giving me thank you so much for watching and taking the time to leave a comment.
🤜💥🤛
Hi! I finally got the upgrade parts from Injora. Still waiting for the skid plate and battery holder. Anyways, I built both the K10 and the F150. Wow! Thank you so much for your support. There’s just one little thing that I’m not sure of. I changed the tires and rims with the Swamp Stomper and the 1 inch beadlock brass rims and the wheels seems to turn a little bit off (kind of an 8 figure motion). Is this normal? Not much, but is there. When driving is not noticeable. I think I put the wheels ok in the rims, since the movement is the same only with the rims on the axles.
I must have done something wrong because now I see that when I move left right the front axle it almost get stucked. These are the diamond ones. Can’t figure it out.
This is happening on both cars, front axles.
Hi bro, that is awesome, I hate waiting for the parts but! It is an exciting day when they finally arrived.
Sounds like you've done a good job, I don't quite understand what do you mean about the figure eight motion on the front wheels?!
I have read your other two comments and you are saying that your front axle is binding?
Is it because of the wheels?
I need a little bit more information as I can't understand exactly what's going on.
Sorry 😔
@@rcfungames Hi! Indeed it looks like binding. I will get home later and take a look again. When running free with the car upside down, without moving the wheels, I can hear a ruttle or something like that. I don’t think it’s the wheels. I will look again and get back to you later. Thank you!
@@rcfungames I still can’t figure it out. When I run without the front wheels sounds smooth. The wheels are not touching anything, by the way. Now I put only one rim, without the ring and the plate with screws (sorry, don’t know the terms) and when I turn the opposite way it’s making that sound again. Looks like coming from the shaft. I have opened the axles and they look ok. Is it possible to have something not quite straight and when I put the rim/wheel/weight on axles to spin incorrectly?! But on both fromt axles? They are the same model, only one black and one silver. As for the upgrades, I changed the chassis, links, shaft, shocks and axles and wheels.
nice vid and especially troubleshooting. sucks you had that quality issue. How's the turn radius on those? And the steering rods look really really close together when servo is at center to the point that any pressure from below up on the bottom rod would possibly bind it.
Thank you bro, it definitely makes making the vídeo a lot more difficult!! Besides the quality control issues I had I've got to say the overall product is really outstanding.
You get two steering rods a short one and a longer one.
I fitted it with the longer one which does make it very close to the lower steering link.
But there is a couple of more clearance and I checked it carefully it never actually touches.
And the steering angles are really good on these axles.
I also had it out for a test and they slide over obstacles a lot easier than the normal black axles.
All in all I'm really impressed with the overall product and will definitely be buying them again for future builds 😉
Thank you so much for watching and taking the time to leave me a comment buddy 🤜💥🤛
@@rcfungames I really appreciate the engagement like this. I will point people to you for these as well. See u next video
What a nice litle screwdriver, from wirch Brand is it?😊
Do you mean the little Allen drivers I work with?
I use the injora tools, that said he's now two and a half years old and still doing really good! I think they cost me 11 bucks 😅
@@rcfungames oh, thank you. I will look to buy them, too 👍
Question for you, what grease do you use? Im quite new to the hobby and would love a recommendation on a grease I should buy.
Okay there are so many greases on the market! And everybody will tell you something different, I have worked as a mechanic most of my life, and I've always used high temperature graphite Grease or from the Castrol or Lucas
I have been using this grease on all my RC cars and so far it seems to work the best for me.
Keeps the gears nicely coated, doesn't mix with water, and is great at reducing noise.
I hope that helps bro! and welcome to the Hobby ✌️😜
@@rcfungames Thank you so much for responding to me! I was wondering if I could use normal auto grease like that. I have some Lucas grease at home already :D
@@DigitalHeadShots that will work perfectly 😉👍
🤘😎🤘
🤜💥🤛
👍
😁👍
They look so good but it really stinks that they weren't working right out of the package
I totally agree, they look amazing!! but it was disappointing that I had so many issues!!
But on the overall I am still impressed with the whole product as it is well made and performs extremely well.
The guys putting them together need to be trained better or pay attention to what they do!
I also want to say thank you very much for watching and taking the time to leave me a comment bro.
Thank you ✌️😉
I did some upgrades on my high country,anodized hi clearance links ,drive shafts,etc,it seems to shudder ,and turns slow hard turns,with the links there’s so much play,stock gearing through out,and rear ends.Not sure of the fix,cheers .
So you went for the links that you can't adjust! That means the angles on your drive shafts are going to be quite severe! Definitely the front one which in return is going to cause binding when trying to turn.
And if you are still running the original gearing with extra weight you going to notice it even more.
I have never used the anodized links because I came to the conclusion that you had to use the brass or stainless steel links so that you could use the spacers on the upper links to push the axle forward giving a much better angle on the drive shaft.
I don't know why they didn't just make the upper links 2 mm longer to sort this problem out.
Now all the play it's got is weird, I would have to see it to understand why it's there.
Did you use o-rings on both sides of the ball joint?
I’ll switch back thanks for the info
@@rcfungames my bad they are adjustable. I never thought they would not work
@@rcfungames just by changing the back already there’s a big difference in the side to side movement ,I bought then to ass some coupler to the truck not realizing there would be a mechanical problem.thanks INJORA MASTER🧰
@@rcfungames all good no more binding ,like butter ,smooth,thanks again.
It’s way heavier,might have to add metal gearing in the differentials and transmission
Guaranteed if you've added weight it won't be long before the plastic gears will strip.
Definitely get yourself the upgraded metal gears for the transmission and differentials.
✌️😉
@@rcfungames I orderd the Heli cut gears and a full transmission with gears,I noticed on the hicountry hi clearance links there’s lot of play in them ,even the round set,normal I guess
I noticed shims with the upgrade,I added 2 but there was binding went so took one out,do I need them
@@rickbarg3980 hi Rick
I have only ever used 1 on the main gear inside the transmission that has the two shafts coming out going to the drive shafts.
And I've only used it on One transmission so far!
So if there isn't a lot of play at all don't bother you should be good 👍
@@rcfungames no it’s good little or no play,just the front tire are hitting the new Injora steering block knuckle,there fairly thick ,thank you for always replying quickly.👍👍👍🍻
Total cost start to finish,all in.The whole build.
That is an interesting question!!
All in all it's around 380€ that I have spent on this one so far.
Which actually is quite reasonable if you think what you get for 200€ !! stock traxxas TRX4M
Just got my new transmission,not much grease in them
No!! they definitely need opening and greasing!! I don't understand why they can't just throw some grease in as they are being assembled 🤔
You certainly going to notice a difference with this transmission.
😁
@@rcfungames all running gear done ,all metal no plastic🍻as always thanks for the advice,priceless
You get what u pay for. It’s a shame that booth axels had issues.
You say it as if they are a bad brand! and cheap!
In my opinion I don't think 79 bucks for a set of axles is cheap.
And not everybody lives in the states where you can order from other brands.
So far I have had absolutely no problems with any of the sets of axles that I have purchased from them. They have been extremely well made and assembled.
I must have just had bad luck, and it probably only happened because they trying to rush to get the new product out before the new year holidays!
For all you know the dude that was assembling them had a few too many drinks that day and didn't realize he grabbed the wrong shaft! 🤣🤣
I really appreciate you watching and taking the time to leave a comment.
Thank you
I think it was assembly parts in a bin that got mixed up is all. QC doesn't dictate quality of the parts. These axles are a smidge spendy but worth the epic looks of a Currie style housing. I enjoy mine.
How much backlash in the gearing
Actually not bad at all! They actually felt better than the black extended axles that I had fitted.
All in all I'm still extremely happy with the product, just upset about the lack of quality control.
Like always bro thank you so much for watching and leaving your comment 🤜💥🤛
@@rcfungames no worries
Idk man, I have a buggy build I wanna get going pretty soon, might look at these.
Also, should check our my recent post, I have my Meus axles on my K10 & had major flex! Looks so badass bro! 💪🏻 I'm happy with it.
Hey don't take me wrong these axles are awesome! it's just a minor assembly issue that somebody did.
Especially when the product is just being launched and especially when they were trying to rush.
Sounds like your high Trail turned out really good.
I am going to go and check it out 😉👍
Always appreciate you watching and taking the time to leave me a comment. 👊😉
@@rcfungames right on. 🤙🏼
Like zero left that's actually Traxxas😂
Well it never started out as a Traxxas this one!
This is a full injora build!
It shares the same platform and parts you use on the Traxxas trx4m but it is definitely not a Traxxas TRX4M 😅
It's a way better and cost-effective way of building a really reliable and good quality rig.
I am sick of buying ready to run rigs.
You end up changing all the parts anyway and leaving all those stock parts just lying around and if you sell them you don't even make close to what you paid for it!!
You better off just building one from scratch.
Thank you so much for watching and leaving a comment bro! I really do appreciate it 🤜💥🤛
I don't buy anything that has gears or shafts from Injora.
Well I have done many builds with just their parts and so far this is the first axle set I had any problems with.
So far the quality from Injora, has been outstanding for the price!
@@rcfungamesme also,just the none adjustable links, that was my bad
OMG so many issues. Thank god I watched this video. I will never buy anything from Injora.
Well that's your loss, because they make some awesome products at great prices!
So they put the wrong axle shaft in the front axle! And the back axle clearly had an issue with the machining on a drive shaft to!
But the great thing is I contacted them and immediately they are sending 2 axle shafts for the rear and two for the front.
Great customer service and there are always issues with a new product, I have seen this even on the expensive brands
Wow. Such poor build quality. Imagine if the price were higher.
🤔
You prob don’t even own one of these, nor can afford one pal. Injoras build quality is well worth its money.
@@S197Muffstang 😂🤣🤣🤣😂😂✌
@@S197Muffstang I couldn't have said it better myself 🤜🤛
So I had some issues with the axles! but at the end of the day the quality is still outstanding and customer service has been great!