How to Replace Camshaft Position Sensor 2000-2006 Toyota Tundra

Buy Now!
New Camshaft Position Sensor from 1AAuto.com 1aau.to/ia/HTCPS00026
This video shows you how to install a new camshaft position sensor from TRQ on your 2000-2006 Toyota Tundra. For vehicles with electronically controlled timing, a camshaft position sensor relays important information to the computer to ensure the engine is running properly. A bad sensor may relay incorrect or no information, resulting in poor running conditions and trouble codes.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
Tools you will need:
• 14mm Wrench 1aau.to/oX6/1AXAA00010
• 10mm Socket 1aau.to/obgb/1AXAA00017
• Ratchet 1aau.to/obFC/1AXAA00016
• Torque Wrench 1aau.to/oaJA/1AXAA00044
• Gloves 1aau.to/oagj/1AXSS00048
• Safety Glasses 1aau.to/o9f/1AXAA00343
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@bearcave1914]

Great video! Thank you for the clear directions and visuals. I replaced my sensor and all is good.

[@mr.chupacabra7172]

Just knocked this out. We really appreciate y’all!

[@MonotoneTanner]

One pro tip for anyone with 4.7 4Runner
You’re better off just draining the coolant and removing the upper rad hose. Way less space and the wiring harness that hangs over the timing cover has way less play

[@williamroman3169]

Well explained nice and simple, I did it exactly as your video, thanks

[@Fall4826]

Great video on this repair, helped me out a ton-thanks!

[@federicomo23]

Thank You for the video

[@sefofatai6618]

do you need to erase any adaption or relearn procedure?