Man am I glad that I found this video and your channel!!! You are a God send man! Curious to know what are some other subs that you would recommend that could also work in this box?
😃 that’s what’s up bro! Glad to have you tuning in. You’re far too kind 🙏🏽 Really any pair of subs with a combined net airspace ranging 1 to 1.6 cf/nt. 🤙🏽
@@210Designsthese are some subs that I’m looking at choosing from in a pair to run in this box. Running into analysis paralysis 🤦🏿♂️ 1. Kicker Q Class 8’s 2. American Bass VFL 8’s 3. WDX G2 8’s 4. Sundown E8’s 5. Sundown SA-8’s Thanks In Advance!
@@B.Washington Well…after looking up the specs on those, your main issue will be mounting depth. This enclosure is right at 5” from the inside wall. (You can gain an 1/2” if you don’t flush mount like I did) Which was done to help maximize clearance off the the back seats. All those subs are a step up from the CompR 8s I used. If you’re wanting to use this box, which is built from 1/2” materials…you’ll need a sub that has a mounting depth under 4.75” or no pole venting (allowing the sub to touch the back wall) or shallow mount subs 👍🏽
@@adrianibarrajr9827 Okay, that's cool there. Cousin looking out for ya :) A lot of people struggle with the seat lift, due to subs they choose. This 2005 Chevy four door, has the metal seat hardware under it. SO he's limited to only behind the seat. I like the newer style trucks with open area under the seat. Getting ready to build one that fits under the seat, to house 2-12" subs and no seat lift as well. Be sure and stay tuned for that build.
Yes sir, sure have 👌🏽 Birch is an outstanding material to use, when building these enclosures. I personally choose not to use it for 3 reasons. To keep costs down for my customers, 95% of my enclosures are wrapped in fabric (so no need in wasting $ on something that won’t be seen) and I ABSOLUTELY DESPISE splinters 😆 In the end it’s all a personal choice. If a customer wants Birch, then I’ll use it👌🏽 Thanks for compliment and the question bro!
@@madcook1936 - This one goes in my oldest sons truck. Had the 2-8” NVX in it. Somebody heard them and bought everything. So these will replace those 👌🏾 My youngest son has the 2-6.5” Skar subs, in a down fire ported box. Got it built and installed, but didn’t take pics of it or the install 🤦🏽♂️. I’ll probably post a short vid of it tho and do a walk through.
I'm having a really hard time getting my sub box right. 15 years ago I built a box for 2 12s,no worries about volume, port , ohms and just built to fit into my regular cab truck and it sounded amazing with any type music. Now I have all this info on what to do but it sounds like ass. Dual Skar ix8d4 with 500+ rms amp .
I feel ya man…times have changed for sure on this car audio. I use to do the same thing back in the day 😆 I didn’t know anything about ported boxes, so a solid sealed box always performed. The smaller subs seems to do better in ported enclosures, but it really depends on the specs. Wedge boxes (truck box) can be tricky when porting. Limited space and clearances. I’m in the middle of a build right now, but may be able to help out figure somethings out…if it’s a simple setup. Just email me: bj.hammon@yahoo.com
I need a lazy Susan but Here's what I think is funny, you know those little fidget Spinners that everyone was into at one point in time? I actually cut two pieces of wood into circles then glue them on the fidget spinner one on top one on the bottom..... that didn't work.... XD it immediately broke apart then I realized soundqubed has a tutorial on how to make a lazy Susan. I dig the nice subwoofer enclosure by the way keep on the amazing work that you do!
😆😆😆 I give you an E effort on your fidget-Susan 😂😂😂 Ideas like that, end up leading to other great inventions bro. Yea this one came from SQ. It was stick to the bottom of a single woofer I ordered. Contacted them and they said keep it....BONUS 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽 Thanks for the comment bro and for watching.
Yes, but I wasn’t shooting for an actual t-line for this build. Just wanted to different style port, than the regular L-shaped I normally do. And yes, the t-lines have a wider bandwidth, but this box covers a great deal itself. This build also requires little power to get loud. Thanks for watching 🤙🏾
I'm just an impatient guy a guess.... Everyone has there ways, whatever works and is quality work is always a good way.. I can tell you take pride in your builds.. Great work.
@@javiroo1743 - Totally understand man. Everyone has their own technique on how they build. That’s why I like watching other builders, to see their process. Some I agree with some I don’t. But I’m always learning from others 👌🏾
@@xxflaxxdread -Thank you for the support. Should have plenty of different builds, that I’m sure you will enjoy. I’m also in IG@210.designs where I post daily 🤙🏽
Box purists freak out on 1/2" mdf box.......I say that as I finish golf cart box made of 1/2" with few xtra braces and resin coating for all weather....haters cry...
😭😭 Like you said, gotta make sure it’s braces correctly. Especially on those builds where internal cf and external clearances are against you. Any pics of that golf cart box? Would like to check that out 🤙🏽
@@210Designs watching a few folks on RUclips make me want to start doing pics or videos lol...I need to share what I've figured out over 35 years of box building ....on wedge boxes you over work yourself...way easier way to do them
I'm building a similar wedge box for two 8-in woofers for my standard cab truck I was thinking about kickers that seems a little big for the parameters is it okay to go larger on the box parameters then recommended
Yes, I’ve built enclosures a little larger and smaller than manufacture’s recommended specs. Generally, if you go larger it’ll require less power to the subs. Good luck with your build 🤙🏽 and thanks for watching and your comment.
Thank you kind sir 🙏🏽 So glad you liked it. It was my wife’s idea to start doing voice overs. Said the builds would be easier to follow. I have more builds on the way 👌🏾👀
@@dirty357 no prob. I purchase all my kicker products from this place. Certified and the refurbished comes with a warranty 👍🏽 www.hifisoundconnection.com/Shop/Control/fp/tcat/27858/SFV/30046?brand=Kicker
😆😆😆 Thanks man for the great comment. You sound like me. I’m always buying more equipment and no room for any of it, in my vehicles 🤦🏽♂️ Whatcha thinking bout putting in yours now?
@@adaboy4z - You had me at Kicker. Big fan of their subs. Massive Audio is another great brand as well. If your thinking of getting one of those, you might hit up sonicelectronix. They are running a huge sale on that brand. Black Friday savings + 20%. I was on there looking this morning 😆😆
🤭 Man.....I just wanna say thank you that amazing compliment 🙌🏽 Thank you for your support band hope you keep tuning in. Have several more coming soon 👀
Beautiful my brother... I can appreciate a nice clean box... sometimes i build my boxes and think "Man it looks good don't even need to carpet!".. Stay Up👍,Pray Up🙏
@@210Designs love watching your builds and the nice and simple format of your vids. I’m wondering if a matte or a gloss clear would look better on raw MDF. Too bad my box build is not going to be conducive to that experimentation.
@@rockymtnredneck4888 - Thank you bro, glad you are enjoying my builds 🤙🏾 I’m sure either would look good. Be sure and rub wood glue on all the porous edges, then lightly sand down. This will stop the paint from absorbing and help keep your colors even. The a few layers of clear to seal everything off. Comes out nice.
@@210Designs yeah, gotta seal the edges. When I was a young carpenter I learned to seal the edge of shelf boards with joint compound to get even paint. Same idea.
The router jig for routing the holes. Great video. I loved that you put both subs at one end instead of balancing it out. Much better for not matching the rear wave and getting lower dB. Smart design 👍🏻
@@bigjmacg - Much appreciation on your comment bro 💯 Here’s the link to where this circle router jig came from. I’ve also used the Jasper model as well. Actually liked it better, because of the price and light weight 👌🏾 www.droppinhzcaraudio.com/collections/installation/products/router-circle-jig?variant=32170727145575 www.amazon.com/s/?ie=UTF8&keywords=jasper+circle+jig&index=aps&tag=hydsma-20&ref=pd_sl_2bvin9gepc_e&adgrpid=55679991746&hvpone=&hvptwo=&hvadid=274683109371&hvpos=&hvnetw=g&hvrand=18023571947502933355&hvqmt=e&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9026617&hvtargid=kwd-356103570367&hydadcr=20374_9349029&gclid=CjwKCAiA2O39BRBjEiwApB2IkrzNgYkAf1LzYftaFJNZhACz2azTf-bS1OFpmulHgm7pwM4D15j2bhoCSqAQAvD_BwE
Really want to hear how it bangs in a 4 door. Im still working on the finish little by litte on my extended cab. You actually helped me out on a video you had done while back to figure out measurements for air space. Nice work and thanks for sharing. Im not the best but im learning from them. You doing bad ass work!
What’s going on bro?! Yessir I sure do remember helping you out with that. Glad to see your still working with it. This one should perform well in that truck. I’ve built maybe two before this one and they did 🙌🏽 It’s wired up on my shop test bench right now, playing background music as I build. Still waiting on my son to come down and install it.
@@ruffmutt5789 - Thanks homie, I really appreciate that 💯 Built one for a local guy for 2-12” SA subs, some years back. Think he had the dodge mags cab. He ended up selling the truck kept the box. You might hit him up on fb. Lane Lawson 👌🏾
Not sure I quite understand the question bro, but I hope this answers it. Internal airspace for this box, was factored for (2) subs. Adding more would change the net/internal volume, port tuning and performances of the box and subs. Hope that answered it, if not hit me back and I’ll try again 🤙🏾
Man..... that had been in my tools list, for too damn long now 😆 The last 3 builds I definitely could have used one. I’ve been known to procrastinate about 🤷🏽♂️ Thanks for the tip 👌🏾
@@Audiojesus00 - You’d have to check with the factory net/cf required, mounting depth, outer diameters and make sure they will work in this type enclosure.
I do bro, but mainly for customer’s in my area. That way I can test fist each enclosure in the vehicle and I need the subwoofers, in order to test each enclosure. This way, I can guarantee fitment and enclosure performance 👌🏾 Thank you for watching and question.
@@beansnrice69 - Oh.... gotcha 👌🏾 That is a book I’ve put together over the years. Has formulas, sub specs, wiring diagrams, box building tips, etc. Believe it or not, I’ve had people see it and ask is it for sale 😆 As for car audio books, I don’t use them. YT is the best thing going right now. Bit if you need help or have questions, I’ll answer what I can ✌🏽bj.hammon@yahoo.com
Thank you sir 👌🏾 Unfortunately, I do not 🤷🏽♂️ I build locally in my area, because I’m limited on these builds. I need the vehicle and subs, in order to guarantee fitment and performance. Hope that makes since 🤙🏾
I mainly build locally in my area, Oklahoma. I restricted, so I have to have access to the vehicle fir box fitment. Plus, I also need the subs, to guarantee box performance 👌🏾 bj.hammon@yahoo.com
@@davidromaine6578 - An el’co, huh?! I don’t think god intended those to have bass 😆 Yea, I think I remember that build. Single 15” Kicker L7 in a two-part ported box. What all are you trying to put in your ride bro?
Man am I glad that I found this video and your channel!!!
You are a God send man!
Curious to know what are some other subs that you would recommend that could also work in this box?
😃 that’s what’s up bro! Glad to have you tuning in. You’re far too kind 🙏🏽 Really any pair of subs with a combined net airspace ranging 1 to 1.6 cf/nt. 🤙🏽
Perfect! Preciate it man!
@@B.Washington Anytime 🤙🏽
@@210Designsthese are some subs that I’m looking at choosing from in a pair to run in this box.
Running into analysis paralysis 🤦🏿♂️
1. Kicker Q Class 8’s
2. American Bass VFL 8’s
3. WDX G2 8’s
4. Sundown E8’s
5. Sundown SA-8’s
Thanks In Advance!
@@B.Washington Well…after looking up the specs on those, your main issue will be mounting depth. This enclosure is right at 5” from the inside wall. (You can gain an 1/2” if you don’t flush mount like I did) Which was done to help maximize clearance off the the back seats. All those subs are a step up from the CompR 8s I used. If you’re wanting to use this box, which is built from 1/2” materials…you’ll need a sub that has a mounting depth under 4.75” or no pole venting (allowing the sub to touch the back wall) or shallow mount subs 👍🏽
Ahhhh!! Yeees you got exactly what imlooking for. Same truck and woofers.
👌🏾 Cool, great combo. Stay tuned for the install, vid should be posted before the holidays.
@@210Designs awesome thanks man. I've been looking hard for this set up.
@@adrianibarrajr9827 I've built and replaced the setup in this truck (3) times now, LOL. Had no idea boxes for this truck were that popular.
@@210Designs I'm getting one for under the seat. No seat lift needed since I'm going with 8s. I've struggled to find a box so my cousin making mine.
@@adrianibarrajr9827 Okay, that's cool there. Cousin looking out for ya :) A lot of people struggle with the seat lift, due to subs they choose. This 2005 Chevy four door, has the metal seat hardware under it. SO he's limited to only behind the seat. I like the newer style trucks with open area under the seat. Getting ready to build one that fits under the seat, to house 2-12" subs and no seat lift as well. Be sure and stay tuned for that build.
Have you used Birch? Great work
Yes sir, sure have 👌🏽 Birch is an outstanding material to use, when building these enclosures. I personally choose not to use it for 3 reasons. To keep costs down for my customers, 95% of my enclosures are wrapped in fabric (so no need in wasting $ on something that won’t be seen) and I ABSOLUTELY DESPISE splinters 😆 In the end it’s all a personal choice. If a customer wants Birch, then I’ll use it👌🏽 Thanks for compliment and the question bro!
Yes sir she is built right and tight. 👌👍
Yessir 👌🏾 Thanks bro!
@@210Designs did you upgrade your son from o e 12 to these two 8s?
@@madcook1936 - This one goes in my oldest sons truck. Had the 2-8” NVX in it. Somebody heard them and bought everything. So these will replace those 👌🏾 My youngest son has the 2-6.5” Skar subs, in a down fire ported box. Got it built and installed, but didn’t take pics of it or the install 🤦🏽♂️. I’ll probably post a short vid of it tho and do a walk through.
@@210Designs gotcha 👍👌
I'm having a really hard time getting my sub box right. 15 years ago I built a box for 2 12s,no worries about volume, port , ohms and just built to fit into my regular cab truck and it sounded amazing with any type music. Now I have all this info on what to do but it sounds like ass.
Dual Skar ix8d4 with 500+ rms amp .
I feel ya man…times have changed for sure on this car audio. I use to do the same thing back in the day 😆 I didn’t know anything about ported boxes, so a solid sealed box always performed. The smaller subs seems to do better in ported enclosures, but it really depends on the specs. Wedge boxes (truck box) can be tricky when porting. Limited space and clearances. I’m in the middle of a build right now, but may be able to help out figure somethings out…if it’s a simple setup. Just email me: bj.hammon@yahoo.com
Your attention to details is second to none. Well done, sir.
I appreciate that Young Sunwoo 🙏🏽 I’m glad you liked this build and thank you for watching 🤝 and the compliment.
Great video & Awesome build 🔥🤙🏼
Thank you Varoo 🤝
Each build gets better and better..
Appreciate that Brian! I try and make sure each box is built with the same quality, no matter how basic the enclosure is👌🏾
I need a lazy Susan but Here's what I think is funny, you know those little fidget Spinners that everyone was into at one point in time? I actually cut two pieces of wood into circles then glue them on the fidget spinner one on top one on the bottom..... that didn't work.... XD it immediately broke apart then I realized soundqubed has a tutorial on how to make a lazy Susan.
I dig the nice subwoofer enclosure by the way keep on the amazing work that you do!
😆😆😆 I give you an E effort on your fidget-Susan 😂😂😂 Ideas like that, end up leading to other great inventions bro. Yea this one came from SQ. It was stick to the bottom of a single woofer I ordered. Contacted them and they said keep it....BONUS 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽 Thanks for the comment bro and for watching.
You actually had enough space for a T-Line. Better bandwidth and requires less power. Nice results nonetheless.
Yes, but I wasn’t shooting for an actual t-line for this build. Just wanted to different style port, than the regular L-shaped I normally do. And yes, the t-lines have a wider bandwidth, but this box covers a great deal itself. This build also requires little power to get loud. Thanks for watching 🤙🏾
@@210Designs 💯
Nice work... very clean.
Thanks for the compliment bro! Definitely digging your builds as well 💯
Very clean little build.. I just found you.
Thank you and glad you liked it 🤙🏾
Great vid. Details on point. 😎
Much appreciated bro 🤙🏾 And thanks for watching!
Great Build, but lots of wasted time using clamps. Unless u have nO nailer ?
Thanks bro 👌🏾 You say wasted time, I say essentially to the build. And yes I do have a nailer.
I'm just an impatient guy a guess.... Everyone has there ways, whatever works and is quality work is always a good way.. I can tell you take pride in your builds.. Great work.
@@javiroo1743 - Totally understand man. Everyone has their own technique on how they build. That’s why I like watching other builders, to see their process. Some I agree with some I don’t. But I’m always learning from others 👌🏾
You gon build my next box..
😄 Thanks bro!!!
Amazing looking box 👏🏽
Thank you and really appreciate your comment 🤙🏽
@@210Designs no problem brother, just subscribed 💪🏽
@@xxflaxxdread -Thank you for the support. Should have plenty of different builds, that I’m sure you will enjoy. I’m also in IG@210.designs where I post daily 🤙🏽
Hell of a box brother
Thanks bro 💯🤙🏾
Nice just subscribed!!
Sorry for the late response bruh 😔 Thank you very much 💯 for the support. More builds coming 👀
I need something similar for a 97 Silverado up,sweet tho 🔥👍🏿Maryland showing ❤️
That’s what’s up man 💯 Much appreciation, all the way from Maryland 🤭 Thank you for tuning in and your comment.
Nice work, like always 💪🏿
Thanks fam 💯
Box purists freak out on 1/2" mdf box.......I say that as I finish golf cart box made of 1/2" with few xtra braces and resin coating for all weather....haters cry...
😭😭 Like you said, gotta make sure it’s braces correctly. Especially on those builds where internal cf and external clearances are against you. Any pics of that golf cart box? Would like to check that out 🤙🏽
@@210Designs watching a few folks on RUclips make me want to start doing pics or videos lol...I need to share what I've figured out over 35 years of box building ....on wedge boxes you over work yourself...way easier way to do them
@@loudelvis610 - Might as well start sharing them. Letting other builders see, different ways it can be done 👌🏾
Nice!
Thanks bro!
Took that enclosure to clamp town. LOL Excellent job brother!
😆😆😆😆 Glad you caught that bro. I see we have the same humor 🤣🤣 #weold👴🏾
Very nice wood work, good work. You should paint it all RED
Thanks bro, I appreciate that comment. Thought about it, but it won’t be seen 🤷🏽♂️ that’s why I just painted accents on it.
Could these be tuned to 85 hz to use as mid bass drivers to compliment some 15's that are lacking on the higher end?
Yessir👌🏽 based off factory specs for these subs, they definitely will.
I'm building a similar wedge box for two 8-in woofers for my standard cab truck I was thinking about kickers that seems a little big for the parameters is it okay to go larger on the box parameters then recommended
Yes, I’ve built enclosures a little larger and smaller than manufacture’s recommended specs. Generally, if you go larger it’ll require less power to the subs. Good luck with your build 🤙🏽 and thanks for watching and your comment.
🙋🏽♂️ new subscriber saw you in the recommended page keep up the good content
My man 🙌🏽 Thank you so much for the support bro 👌🏾 I’ll definitely return the favor.
Great build, video, tutorial, audio
& articulated.
Thank you kind sir 🙏🏽 So glad you liked it. It was my wife’s idea to start doing voice overs. Said the builds would be easier to follow. I have more builds on the way 👌🏾👀
Hey, I just ordered two of the same 8" kicker comp r subs. Haven't ordered amp yet and unsure of what to get. What amp did you use for this setup?
That’s what’s up bro! My son still had this setup in his truck today 💪🏽 He’s pushing them with a 46CXA800.1
Nice! Thanks man!
@@dirty357 no prob. I purchase all my kicker products from this place. Certified and the refurbished comes with a warranty 👍🏽
www.hifisoundconnection.com/Shop/Control/fp/tcat/27858/SFV/30046?brand=Kicker
neat and sweet.....
love the vids bro...
🇹🇹🇹🇹🇹🇹...
My man 👊🏾 Thanks as always for tuning in! Respect!
Excellent work design and narration!! I don't need another sub enclosurein the car but you motivated me to think on it.
😆😆😆 Thanks man for the great comment. You sound like me. I’m always buying more equipment and no room for any of it, in my vehicles 🤦🏽♂️ Whatcha thinking bout putting in yours now?
@@210Designs I have a Kicker L7R12 in the trunk now. Thinking of getting a massive audio Hippo 12. More Power!!
@@adaboy4z - You had me at Kicker. Big fan of their subs. Massive Audio is another great brand as well. If your thinking of getting one of those, you might hit up sonicelectronix. They are running a huge sale on that brand. Black Friday savings + 20%. I was on there looking this morning 😆😆
@@210Designs Thanks for the heads up. I will look at them.
I like ur work sample and clean, I have a lil project wanted to see something like that would cost but four 8s
Thank you sir 🤙🏽 If you were local, I’d get you fixed right up. 4-8s will definitely get down.
I love your vids. You are prob the best enclosure builder i have seen on youtube.
🤭 Man.....I just wanna say thank you that amazing compliment 🙌🏽 Thank you for your support band hope you keep tuning in. Have several more coming soon 👀
Beautiful my brother... I can appreciate a nice clean box... sometimes i build my boxes and think "Man it looks good don't even need to carpet!".. Stay Up👍,Pray Up🙏
You already know 😆 Especially if it will never be seen, once it’s installed. Waste of money to me, at that point 👌🏾 You do the same homie!
Very nice 👍 Bj. Every box you build is done with finesse.
Thank you for saying that man 😊 Glad it shows in each build.
The raw look is pretty cool. Ever think about clearing it to preserve it?
Thanks man and for that great idea. I’ve never thought about preserving it tho. Very fingerprint happy 😆, Thank you for watching 🤙🏾
@@210Designs love watching your builds and the nice and simple format of your vids. I’m wondering if a matte or a gloss clear would look better on raw MDF. Too bad my box build is not going to be conducive to that experimentation.
@@rockymtnredneck4888 - Thank you bro, glad you are enjoying my builds 🤙🏾 I’m sure either would look good. Be sure and rub wood glue on all the porous edges, then lightly sand down. This will stop the paint from absorbing and help keep your colors even. The a few layers of clear to seal everything off. Comes out nice.
@@210Designs yeah, gotta seal the edges. When I was a young carpenter I learned to seal the edge of shelf boards with joint compound to get even paint. Same idea.
Nice clean design BJ 💪🏾
The infamous Spray Way 🙌🏽🙌🏽🙌🏽 I seen the repairs you did on that last vid you dropped, work of art 💯
Does this box fit a 2007 silverado classic non hd just regular 1500 crew cab
How much for a box
I love that router jig can you send me a link please. I need that for my next box.
Thanks for watching man! Which router jig are you referring to? And I’ll be more than happy to get you that info 👌🏾
The router jig for routing the holes. Great video. I loved that you put both subs at one end instead of balancing it out. Much better for not matching the rear wave and getting lower dB. Smart design 👍🏻
@@bigjmacg - Much appreciation on your comment bro 💯 Here’s the link to where this circle router jig came from. I’ve also used the Jasper model as well. Actually liked it better, because of the price and light weight 👌🏾
www.droppinhzcaraudio.com/collections/installation/products/router-circle-jig?variant=32170727145575
www.amazon.com/s/?ie=UTF8&keywords=jasper+circle+jig&index=aps&tag=hydsma-20&ref=pd_sl_2bvin9gepc_e&adgrpid=55679991746&hvpone=&hvptwo=&hvadid=274683109371&hvpos=&hvnetw=g&hvrand=18023571947502933355&hvqmt=e&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9026617&hvtargid=kwd-356103570367&hydadcr=20374_9349029&gclid=CjwKCAiA2O39BRBjEiwApB2IkrzNgYkAf1LzYftaFJNZhACz2azTf-bS1OFpmulHgm7pwM4D15j2bhoCSqAQAvD_BwE
Thx so much.
@@bigjmacg -Anytime 👌🏾
I’d call that a labyrinth port. Not a t-line and not a slot
That works too 🤙🏾
Really want to hear how it bangs in a 4 door. Im still working on the finish little by litte on my extended cab. You actually helped me out on a video you had done while back to figure out measurements for air space. Nice work and thanks for sharing. Im not the best but im learning from them. You doing bad ass work!
What’s going on bro?! Yessir I sure do remember helping you out with that. Glad to see your still working with it. This one should perform well in that truck. I’ve built maybe two before this one and they did 🙌🏽 It’s wired up on my shop test bench right now, playing background music as I build. Still waiting on my son to come down and install it.
How
Not sure I understand your question bro. “How” what?
I would love to see a full range speaker build
Never had a customer wanting a full range speaker build. Only thing that comes close to that for me, is the shop amp/sub testing station I built.
San Antonio Texas ? Is that where u located
Sorry bro, Oklahoma. The 210 is not an area code, it goes back to pagers. It was my code second and tenth letters in the alphabet 👌🏾
@@210Designs dam ... needed a good box for my mega cab ... you get down ... great builds bro much respect
@@ruffmutt5789 - Thanks homie, I really appreciate that 💯 Built one for a local guy for 2-12” SA subs, some years back. Think he had the dodge mags cab. He ended up selling the truck kept the box. You might hit him up on fb. Lane Lawson 👌🏾
What would of happen if you would of put 2 more 8s on the other side (ported)
Not sure I quite understand the question bro, but I hope this answers it. Internal airspace for this box, was factored for (2) subs. Adding more would change the net/internal volume, port tuning and performances of the box and subs. Hope that answered it, if not hit me back and I’ll try again 🤙🏾
@@210Designs Preciated
@@davidatrian913 Anytime sir 👌🏾
How much
The box is for my son, so it’s free 🤷🏽♂️ Normally, a box like this would run around $175-$200
Tell you what as well, a 90 degree drill can get into tight spots for 45’s
Man..... that had been in my tools list, for too damn long now 😆 The last 3 builds I definitely could have used one. I’ve been known to procrastinate about 🤷🏽♂️ Thanks for the tip 👌🏾
@@210Designs will this box design work seald as well
I hav 2 10s fosgates p3s shallows
@@eliasibguzman5987 Yes, but I would recommend separating the subs, using a divider. Giving each sub an equal amount of airspace 👌🏽
@@210Designs ok thnks for the advice
Lookin clean bro, I'm shocked you didn't paint it for the extra protection but hey, to each their own.
Thank you bro. No need, I’ve yet to have a box, for this truck, get damaged from moisture or anything like that.
Is there a way to make one with 4 8 and still have a port
Yes you can, but you will be well below the required internal air space required. I’ve built a few like that and they still sound good 👌🏾
I want to make one for 2 type r 10s or 4 sundowns
@@Audiojesus00 - You’d have to check with the factory net/cf required, mounting depth, outer diameters and make sure they will work in this type enclosure.
Do you make boxes for people lmk I need one to fit in a 2009 Honda Accord for 2 10” American audio duel 4 ohm thanks for your time
I do bro, but mainly for customer’s in my area. That way I can test fist each enclosure in the vehicle and I need the subwoofers, in order to test each enclosure. This way, I can guarantee fitment and enclosure performance 👌🏾 Thank you for watching and question.
Where are you located
Small town in Oklahoma 👌🏾
What car audio book do you recommend?! Which one was the one you used in the vid?! Ty!👍🏼
I’m sorry bro, I don’t understand your question? Will you explain it for me and I’ll be more than happy to answer it 🤙🏾
@@210Designs the one in the binder in your vid... it lists the different combinations you can wire in for speakers/amps exc...
@@beansnrice69 - Oh.... gotcha 👌🏾 That is a book I’ve put together over the years. Has formulas, sub specs, wiring diagrams, box building tips, etc. Believe it or not, I’ve had people see it and ask is it for sale 😆 As for car audio books, I don’t use them. YT is the best thing going right now. Bit if you need help or have questions, I’ll answer what I can ✌🏽bj.hammon@yahoo.com
What kinda watts you giving them?
I’ll pull an amp off the shelf that I’ve had for years and push them. A throwback RF Punch 200.1 It’ll be more than enough for this setup 👌🏾
What's ur location
Small town in Oklahoma 👌🏾
Do you do demos? Id like to know what those subs sound like. Great build
I do when I have access to the vehicle 👌🏾 Definitely will with this one, seeing how it’s my son’s.
Would you be willing to sell a cut sheet for this box? Wanting to do 2 8’s or 4 6.5’s in my 2006 crew cab half ton
Not a problem bro. I don’t charge for the cut-sheets to these builds. Just email me and I’ll get it to ya 👌🏾bj.hammon@yahoo.com
@@210Designs thank you! Just sent you an email!
Really nice box, do you have anything for a 2000 GMC Sierra extended cab? Can we get in touch? I like the dual 8s
Thank you sir 👌🏾 Unfortunately, I do not 🤷🏽♂️ I build locally in my area, because I’m limited on these builds. I need the vehicle and subs, in order to guarantee fitment and performance. Hope that makes since 🤙🏾
How long was this box
Think I put a tape on it, right at 56”
Is that wire sky high or one of those brands I have the same stuff
Yea, I believe it was that company. I buy/use different manufacturers, just to get better perspective 👌🏾
Are you located in San Antonio? Any contact info? I'm looking to get an enclosure for a 2014 Mustang with 2 10 inch Arc Audio ARC10.
Sorry bro, in located in Oklahoma. Great car audio by the way. I’m sure it will sound amazing in that vehicle.
@@210Designs Damn, thanks anyway. The wife and I are going for SQ, gonna pair those subs with some Focal K2 components
@@ClementeGalloJr - You both will definitely be happy with that setup. Top notch equipment 🤙🏾
How can i contact you about a build
I mainly build locally in my area, Oklahoma. I restricted, so I have to have access to the vehicle fir box fitment. Plus, I also need the subs, to guarantee box performance 👌🏾 bj.hammon@yahoo.com
Well i have a 82 el Camino and seen you had did a build for a i live in Amarillo so I'm not too far away
@@davidromaine6578 - An el’co, huh?! I don’t think god intended those to have bass 😆 Yea, I think I remember that build. Single 15” Kicker L7 in a two-part ported box. What all are you trying to put in your ride bro?
And another one lmao
😈 you know how we do bruh! #team210
Where are you located
A small town in Oklahoma 🤙🏾