Oh yeah a bit tip for those who are starting on a project and looking for tips. save the links on these type of videos so you can review and revisit the steps anytime. Check our playlist for step by step guides.
Any tips in painting narrow tubes such as bike frame? im having a hard time hitting those narrow spots, ends up having spots where the paint not gloss finish.
Great video; just in the right time since I will soon be sanding my project. Question though, the paint Is very oxidized. How do I get the oxidation off.
@@3rekoatskustoms929 This is why I recommend wrapping it with plastic wrap. It will last a few paint jobs easy like that! ruclips.net/video/x96_C3nAdbs/видео.html watch that~
Great tips, whenever i sand my primer i start with 400 grit then 600 and finalize on 800 (dry sanding) but even though after that i get sanding scratches after laying clearcoat, please advise.
Hey Man you might wanna check our VIP Program which covers all auto body and paint tips and you may Learn How To Auto Body & Paint Like a Pro! Visit www.radspaintformula.com/r2
Im wet sanding a plastic front grill off of a 91 chevy silverado pickup. its a lot to get in between the grill slots. Ive been using 320 grit and sanding in a swirling motion in small areas and moving across in that way. Its still leaving swirl marks. will the paint cover the swirl marks or do I need to go to a finer grit. Just trying to save some time here. Whats your take on steel wool for wet sanding as well.
I prefer wetsanding over drysanding because it saves ALOT of sandpaper (if you constantly clean the paper and don't sand over dry areas). But the only bad thing about wetsanding is I absolutely hate having to wash in between the edges of panels when the dry clear coat gets dry (especially if you forget to wash the car before going into the weekend).
Hi Tony, I bought some shopline JP354 primer. It's a 2:1 ratio. My question is after I mix it up do I have to wait before spraying or can I start spraying as soon as I am done mixing. Love the videos. Hope to hear from you soon. Thanks
Oh yeah a bit tip for those who are starting on a project and looking for tips.
save the links on these type of videos so you can review and revisit the steps anytime.
Check our playlist for step by step guides.
I really appreciate your content. I'm about to start sanding my project so this is excellent timing. Thanks for the videos
Glad it helped!
Excellent !
Great personality, Great voice, Great advice, and Great Video.
👍I’m starting a project in my truck, i really appreciate you time to make this video,👌
As always excellent demo!
Thanks, bud!
Thanks for the info Tony. Didn't know I can sand and paint off clear coat. Appreciate it!
Thank you for watching! will bust out more videos like this in the future to help you guys out!
Yep you can!
Love the videos... thanks Tony
Yo Yo!! Miss you bro! Glad to see your still doing your thing on LABAP!!!
Excellent as always
Any tips in painting narrow tubes such as bike frame? im having a hard time hitting those narrow spots, ends up having spots where the paint not gloss finish.
Great video; just in the right time since I will soon be sanding my project. Question though, the paint Is very oxidized. How do I get the oxidation off.
Great tips love the garage.
Thank you man!
@@HowToPaintYourCar Hey. Tony are there any issues with the len becoming cloudy from over spray with the gun Bubb? I'm really thinking of buying one.
@@3rekoatskustoms929 This is why I recommend wrapping it with plastic wrap. It will last a few paint jobs easy like that! ruclips.net/video/x96_C3nAdbs/видео.html watch that~
@@HowToPaintYourCar Thanks I didn't know you had this video that was my only concern i will be getting one in a week or so.
Paradice Garage is rocking the techniques ,,,you guys will never go wrong ,,hookup LABAP VIP and you all SET!😎
Thanks Gavin! I hope all is well my man!
Thanks for the info 👍 when I scuff parts I use a scuff pad and comet or Ajaxs
Great tips, whenever i sand my primer i start with 400 grit then 600 and finalize on 800 (dry sanding) but even though after that i get sanding scratches after laying clearcoat, please advise.
Hey Man you might wanna check our VIP Program which covers all auto body and paint tips and you may Learn How To Auto Body & Paint Like a Pro! Visit www.radspaintformula.com/r2
Im wet sanding a plastic front grill off of a 91 chevy silverado pickup. its a lot to get in between the grill slots. Ive been using 320 grit and sanding in a swirling motion in small areas and moving across in that way. Its still leaving swirl marks. will the paint cover the swirl marks or do I need to go to a finer grit. Just trying to save some time here. Whats your take on steel wool for wet sanding as well.
Hey Man! I got a lot of contents on wet sanding on my website you may check out at www.learnautobodyandpaint.com/?s=wet+sanding
I prefer wetsanding over drysanding because it saves ALOT of sandpaper (if you constantly clean the paper and don't sand over dry areas). But the only bad thing about wetsanding is I absolutely hate having to wash in between the edges of panels when the dry clear coat gets dry (especially if you forget to wash the car before going into the weekend).
Tony i was just wondering if you have wet sand paper different from wet sand paper
Hi Tony, I bought some shopline JP354 primer. It's a 2:1 ratio. My question is after I mix it up do I have to wait before spraying or can I start spraying as soon as I am done mixing. Love the videos. Hope to hear from you soon. Thanks
There is a set time for paint products. You could wait 5-10 minutes and it should be ready for spray.
Tryna custome paint an old school NES, don't want that orange peel look tho....hoping I can learn to wetsand and polish.
Is it true that companies design sandpaper with materials that lubricate as your dry sanding to duplicate wet sanding without water mess.
Never heard of that, but there are grades of sandpapers and grits. Kovax makes a superior sandpaper for sure.
Hello! 👋
That’s a waste of money you can buy the plastics cheap
Not for restoration or collector’s item.