HOW TO: Find a nasty engine noise!
HTML-код
- Опубликовано: 30 янв 2020
- In this how to video; a guide in finding a nasty noise from your engine...
You will need a rod...a steady hand...hearing...and some common sense!
I hope it proves helpful.
There are other methods, thats fine, drash on and just stay safe!
Thank you for watching, all likes and subscribers are very much appreciated, all comments are read and replied to as soon as I can :-)
Social media stuff:
/ piggypowerofficial
/ piggy.power
DISCLAIMER:
Don't do stuff you can't do safely. Авто/Мото
Came here for something about Peugeot 407 but found the reason of stupid sound in my Chrysler Van. Thanks man, I sure did subscribe since Im swimming in the pool of problems where my lovely 407 keeps me in.
Nice! Not the problems you are having... The fact I've helped a bit! All the best! I miss the 407 comfort from my barge. 👌
Thanks for subbing 👍🐷💪
@@PiggyPower I like the car but I wish I was able to buy new one or be the first owner. I mean, there is this weird thing Ive never seen in my life is that somebody punched a hole in oil vapor hose and installed an electrical wire in it! Wire goes through the vapor hose! any logic? I cant find any answer from any mechanic other than "Ive never seen it" and its driving me crazy!
But I still love that bastard :)
Need pics!!!
@@PiggyPower Better yet I have 30 sec video where everything is clear. How can I send it to you? Upload on RUclips and send link or?
Either RUclips or follow Piggypower on Facebook and send it there 👌🐷💪
thanx very useful
No worries! Happy to help 👍🐷💪
I've a rattle noise from belt area, I took the belt off doesn't make any noise, when the belts back on it rattles
...getting warmer ....
Love it mate I think I have the same on my pug 206
Same noise??
@@PiggyPower yes I diagnosed it myself new wat it was but glad I found ur video to comfirm it 👍
Very well explained 👏
Thankyou
Nice! Well done!
I've got the later 136 hp HDi but I think it has the same tensioner. Is it possible that mytensioner has gone slack as I get chirping when the engine is cold that goes away once warm? The bearing in the tensioner appears to be ok though, no noise like this one.
Yes, or something else is wearing, an idler or the belt itself
@@PiggyPower Cheers, I think I'll change the tensioner as I dont think this engine has any idlers apart from the one on the tensioner itself.
Do the test as shown... Could be a dry alternator bearing or even a cambelt idler/tensioner.
Will do. The timing belt was done recently and since the noise goes away when warm, I'm hoping it's the tensioner :)
@@PiggyPower cheers mate will try it in the morning and let you know how I get on
Any ideas on cost for repair for same fault you had..
£20 if you don't yourself. 🐷💪
interesting, here I am wondering, "how am I going to fix this silly noise in this pug, it's gunna sell for nothing when I find out it's another failed whatever", and here you are.
😉👍
Just remember me when you sell the car for twice as much as you thought you'd get 😉
👌🐷💪
@@PiggyPower sure will :)
still same noise, can i contact you := )( my engine is rough but not shown at the speedometer :/
Keep looking ... I can't hear things properly over the internet from 100s/1000s of miles away!
Mr Piggy, i have a problem with my lion. (206) The engine is vibrating like MAD. I know that the engine mounts are bad. Well with that movemente ofcourse they are. But i cant tell why the engine is moving so god damm much. Plis help me! (Engine TU5JP4)
Misfire perhaps?
If engine mounts are bad/broken/damaged/failed... This would make the engine move a LOT
@@PiggyPower yeah i know Mr Piggy, but im sure there is something else. When i pull the spark plug they come out with oil, could it be that the engine is not "timed" correctly?
thx for the answer btw =)
and if it is a misfire how can i check that? i dont wanna take him to a mechanic here... cuz there is not a single honest or very good one where i live
Timing is locked by the timing belt, when they slip, the engine has catastrophic failure. Plugs coming out with oil around them or on the tip? If on the tip, you have a serious internal issue. If just around them, then oil is leaking externally and finding its way into the plug wells. This needs fixing. It could also cause the spark go to ground/cause a misfire. Does it misfire when driving or just idling?
Pug 206 1.4, got noise from engine that dissapears when clutch is pressed, but the noise seems to come from opposite side from clutch?.
Have you followed this video to find the noise?
@@PiggyPower Not yet (My brothers car, but will do so when I get hold of it), is it possible for a release bearing noise to be tranmitted through engine to other side ie cylinder 1 end?. He seams to think it's the clutch, but noise from left ( belt end) says no to me?. Great video, recently did Timming chain on Smart 450, sod of a job but turned out OK (So far).
I've never known a clutch noise to come from a cambelt... But there's only one way to truly find out ... Go investigate! 😜👍🐷
@@PiggyPower Ok, he (Bro) said" it's the clutch. so down the Rabbit hole I go.
@@mac_uk5464 not really. Cheap parts. Easy to do. No annoying dmf
did u had rocker arms noise?
No
my 206 is chirping its still within 3 month warranty, should i return it?
That's your decision really isn't it? Read the warranty, see what it does/doesn't cover. Also... Where did you manage to buy an old 206 with a warranty!! 🤔
@@PiggyPower a garage, its on 50k miles 2007
Hallo can you help me pleas en sorry for my english in dont speak good . I have a peugeot 206 1.1 2005 it also make a noise en i change evrything canshaftpully the pullys dynamo waterpump tensioner of the distrubitie belt evrything and it stil make nois like abrasive metal can it be that its the crankshaft or the bearings can you pleas help me i cane make a video and put a link if you can answer me pleaaaaaas that noise is making me crazy .
Have you followed this video guide to identify the location of the noise? Crankshafts/bottom ends don't make grinding noises. 👍🐷💪
@@PiggyPower hey thanks for you repons the noise is comming from the distribution area i have chek the waterpomp or the spanner of distribution end evrything is oke en good and like i say the sound is comming from inside the engine later i wil make a video en send a link so you can hear the noise thank you
Noises online are almost as useful as noises for a deaf person. Use a rod like I said and investigate. The engine is big... It might translate the noise across the engine but it will be louder near the source!
Its a peugeot 206 2005 1.1 if you now what the problem is pleas tell me thank you verry much 😉👍
Power steering pump sounds noisey to me. . . But maybe that's just the audio, as I say it's like a deaf person guessing... Have you checked if the cambelt is rubbing against the cambelt cover or is tensioned too tight? Does the noise go away if you remove the aux belt?
Can it be that the noise is comming from the oilpump ?
If the oil pump is making a noise... Yes
@@PiggyPower oke thank you for you answer i gonne chek it and let you now thank you
My car makes a very hollow humming sound when I first drive it
Awesome
My grangfathers service guy was deaf. He identificate the engine sound an noise with rod too but not with her ear but with teeth.
Amazing 🤣👌
This guide was not clear enough, my face is stuck inside the gearbox
Least no one has to look at it anymore 👌