CAR PAINTING: HOW TO MASTER PAINTING/CLEAR COAT
HTML-код
- Опубликовано: 7 окт 2024
- Welcome back! in this episode you will find all the right and important steps for the best possible paint job finish..
#carpaint #paint #besttechnique #clearcoat #acura
THANKS FOR YOUR SUPPORT:
Product links for your next job👇
Masking tape 1inch : amzn.to/3xr6669
Masking tape 2 inch : amzn.to/43REcfK
Booth mat to keep the dirt away: amzn.to/3PNrfxl
Paint booth protective film: amzn.to/3VOkgs4
Sand paper a box of different grits: amzn.to/43REfbq
DV1 paint gun: amzn.to/4aqofPN
Great low budget gun: amzn.to/3U8S9l1
Sanding blocks: amzn.to/3vSTR1s
Sun gun: amzn.to/3W9ji9V
Masking tape 1inch : amzn.to/3xr6669
Masking tape 2 inch : amzn.to/43REcfK
Booth mat to keep the dirt away: amzn.to/3PNrfxl
Paint booth protective film: amzn.to/3VOkgs4
Sand paper a box of different grits: amzn.to/43REfbq
DV1 paint gun: amzn.to/4aqofPN
Great low budget gun: amzn.to/3U8S9l1
Aero pro paint gun: amzn.to/44fpRKa
Sanding blocks: amzn.to/3vSTR1s
How to contact me:
Instagram : @docta painta
Email : potto135@yahoo.com
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
Love the last sanding step advice on the final base coat, thank you.
Glad I can help. Thank you for watching.
I've been painting for 23 years and I'm still learning and making mistakes. Great advice and Happy new Year!
Same to you my friend 👍
me too... always learning man :)
Me to 22 years and I couldn’t agree more!
Great job Mario ! I enjoyed watching this Video and learned a lot. I just bought this R500.
My pleasure 😇 how do you like it?
Am new here my friend, am a patin in Nigeria ur hand is very good ❤
@@CynthiaNnenna-c7j Thank you! And welcome to the channel 🙌
thanks Mario, thanks to you, I am at the stage of painting the car, this video also helped me because I will be painting it black. Greetings from Poland
I’m happy to help. Thanks for running in from Poland🙌
Another great video packed full of useful tips! Thanks again Mario! Your very good at teaching in high detail. 😎👍
Thanks for watching 🙌
Thanks for sharing your knowledge and expertise. I appreciate and enjoy your videos. Keep up the good work!
Thank you! Thanks for watching 🙌
Very informative, your tips and techniques are spot on! Attention to detail is off the charts 👍
Thanks👍
Good job,I hope you take video about how do we painting pearl white to be smooth،and how many of thinner do need to mix with pearl.
solid info! it would be nice to have some info on approximate volume of clear needed per size panel.... how much for a hood vs door vs bumper etc
fantastic work! I bought one of those LVLP "guns" last week after watching Paint Society's video. Haven't tried it yet, but anxious to do so. My last paint job came out the best yet thanks largely to both of your videos
Happy to hear it. Let us know how you like it when you get a chance to use it. Happy new year 🎆
will do
great suggestions and ideas as always keep up the good work !
🙌
Great video brother thanks for your tips and insights
You’re welcome!
Thanks for taking the time to do the video and teaching us Keep them coming 👍 Happy new year
You got it. Happy new year🙌🎉
Thank you!
Sure thing.
Hi Marion and I hope you are having a great new year with your family👌I have the Rongpeng R500 it came with 5 different setups and while it does a great job on the WoW (sealer) and base I find it lays more texture or peel than I'm used to which I suppose is fine for OEM finishes but for what I do I need a flat finish so it's not as good as my favourite budget gun which is the Astro Euro-HE 1.3, maybe I'm just spoilt with my nice X5500 and WS400 and all my other good guns. I would say the R500 would be an ideal gun if you are starting out👍
Thanks for sharing as always🙏👍John UK
Thanks John. It’s going to be a great year. You’re not once you start using good guns it’s hard not to notice the difference when using a $60 gun. I hope you will have a great year as well.
Thank you, new at this tryin to figure out what gun to purchase, had my car painted 3 years ago never got complete so I’m trying to learn it, had to block it out had a lot of runnys and sag look, I really enjoy hand blocking it’s very therapeutic for me , next phase to learn is spraying, I’d like to repaint it myself as I’m learning block work I kinda went threw the clear but that’s how you learn gotta mess some up to know what to do, top half of car was thick bottom half the clear coat was thin, so if I just respray I’ll know how much material is on it , thank you for the vid keep up the good work
You’re welcome! thanks for watching . It’s all about learning, step by step mistakes are fine. But if you don’t know how to recover from your mistakes that’s a huge problem. I have lots of videos for you to learn from.
Ya mawn! Great video 👍
Respect
Great work!! Been watching your videos thanks for all the tips!
Thanks for watching 🙌
Wait, wait, always learning from ya, but u mean after 2 basecout, give a 2000 sanding? Then, after all clear, sprayed another sanding to clear, we have a nice smooth finish. Dammed, no wonder my project sucks. Thanks again, bruh. *(Sorry my language, I'm from the Caribbean).* Be blessed
Thanks. You can still get a good finish without sanding. And just to be clear you always spray another coat of base before clear. Happy new year🎆
@mariopaintclass6091 Thank you 😊, Just a question how much time do you wait before sanding the coat to let dry for sanding. Thank you again.
@@blueromeo1974 about 10 minutes but the timing could change depending on the weather.
HI MARIO I GOT MY FORD FOCUS MK3 FRONT BUMPER PAINTED IN SOLVENT BASE COAT AND ITS TOTAL DIFFERENT FROM MY CAR THE BLOKE AT THE PAINT SHOP TOOK PICTURES AND SPECRO PHOTOS OF THE WING FENDER AND ITS TOTAL DIFFERENT I WENT BACK TO THE SHOP AND HES MIXED ME ANOTHER 1LT OF BASE MY MATE SAID IT NEEDS A BLEND ON THE WINGS OR FENDERS
Happy New years 🎉! Keep the videos coming 😊
Happy new years 🎉 I’ll do my best
Sup Mario... good looking stuff brother... tell Brian to get to using that lil vevor welder he needs to get in the booth!!! Love yall guys. Keep up the content brother
Thanks man🙌 Np.
🎉 happy holidays to you and the family 🇹🇹🎉 I've seen some reviews of that gun it really doesn't atomise bad at all
Same to you. Thanks for watching 🙌
Class Mario you make it look easy 😂
Everything might seem difficult at first, but once you learn it becomes easier.
Hey Professor Mario, where are you located and hope you are in New York. I would love to get some work done if possible? Peace
👋 I’m in Ft. Lauderdale Florida
Thanks for sharing and tips and may I know what brand name of clear coat you using in the black base coat
I used Utech clear coat and the sikkens brand base coat
I bought an R500 recently and I love it!
Do you think a spot blender like Spray Max 3680093 would work to bring back your wet edge?
Thanks for the video 👍
Thanks for sharing. Blending additives are for blending n burn in it won’t make up for clear coat coverage.
Are you reducing with urethane reducer?
Wunderbar :) Happy New Years!
Happy new year 🎊
💪🏾👌🏽
✊🏽
Good video , but why reduce 4:1? It’s already thin.. curious - also reducer
Can break down the resins and effect longevity of the clear - love your stuff dude happy new years
Thanks. 4:1 is not thin. Reducer can break down the clear if you over pour not knowing what you’re doing. Happy new year 🎊 thanks for watching.
Found you on Paint Society, just bought a spray gun for a black paint job. Want to do the hood, quarter panel, back bumper and top of the car. Question is, should I start sanding with 400 grit then hit it with 600? I just used 220 on it just to see how it would look and I got down to metal in one area. It's a project car, not my main but it's a good car. I have been listening to all of the steps. I think I'll do one panel at a time since I've never painted before. Any advice on anything else I might need? I see yall used sealer on a job, do I need that? I'll send before and after photos so you can see my work. Appreciate you and Paint Society...
Welcome! The sand paper you use is determined by the damage on the car. If there is no damage you can start with 600 grit. If you have dents, scratches, and rock chips. You can start with 180. After you fixed the damaged area refine with 320 up to 400 grit before primer.
@@mariopaintclass6091 Can you send primer? If so what would be best grit? I just sanded with 220 but there's some scratches so I think I have to go down a grit. I've watched yall sand primer before applying base coat. I'm taking it one step at a time.
@@bashir1039 yes start with 400 grit. Also I have few playlist you can watch. With a complete car restoration including the ‘“how to sand primer step.
@@mariopaintclass6091 Ima check it out once I get back in
I don’t know anything about painting but just being curious. How long should you wait before applying the second coat of clear
10 to fifteen minutes
Nice video Mario, did brian teach you to paint at the Accura FL dealer paint shop ?
I started as a helper with him and another guy Laz. They both thought me how to prep n paint
Are you putting Color right over primer? I’ve always sealed over primer , and still end up with lines where the primer is feathered.
I do paint over the primer. And the sealer should eliminate that line or ring around the primer.
after you sanded the base with 2000 grit paper, what did you clean it with?
Just a clean towel with no liquid cleaner and then tack rag
May i ask why you chose 2000 grit to sand over the base before clear? Was it merely to address small dirt nibs and imperfections before applying clear? I ask because I wanted to be sure you didn’t mean 1000 grit in order to avoid adhesion issues. Thank you for the content and keep up the great work
@@Nino13084 if you are trying to ONLY add clear coat then you can sand with 2000-3500 grit sandpaper
@@Nino13084 yes I meant 2000 grit. And it’s merely to address the minor imperfections. Also I base one last time before clear. Thanks for watching 👍
Hi, i want to buy an a610 from aeropro, i guess its an r500 but a little bit upgraded, but im not sure if my compressor can hold much, its quite small, the idiot question is, can i "use" water like i'm spraying to check how much i can paint with my small comp?
No question is stupid if don’t know. The water can give you an idea basically you want to see if the pressure drops.
So, 3 coats of base with 2000 grit sanding on the first coat?
I sand the second to last coat
Thanks, Mario!
What were your pressure settings on base and clearcoat?
The odd thing about this is in order for me to get proper atomization, on my pressure gauge it was 28 PSI for clear and base I didn’t expect to use that much pressure.
@@mariopaintclass6091 Awesome, thank you for the feedback
I thought there are adhesion issues when you go higher than 6-800?
Not in the process of painting. I know it might be a little confusing, but it would be different if you prep the car with 2000 before painting.
@@mariopaintclass6091 got it! Thanks for the clarification
Which pad are you using on the DA?
Here’s a link; amzn.to/4bt9xc2
@@mariopaintclass6091 the pad in your video appears to be much thicker. Is there a different pad? Ty
@@FE428Power it’s the same size my DA is a finishing DA so that’s why it might appear thicker.
Dam black paint jobs are always the dirtiest eh! Not to sure why but there is definitely something to it
It’s just the fact that black doesn’t hide imperfections. just like you will always see the imperfection in the body work
@@mariopaintclass6091
I feel there is more to it than that. The black pigment almost seems more prone to static or something. I know I also don’t like how the tack rag slides on black base I feel it leaves behind debris. On another interesting note I feel the heavy metallic blacks are much cleaner than a black or black pearl. Might be just me, but it sure seems like there is something to it.
@@JR-ho5qm it’s all possible. Just like I think it’s easier to buff metallic or pearl black than solid black or is it just me
@@mariopaintclass6091
Yes you’re right the metallic blacks do polish back easier than a straight black, so like you said it could just be the fact that pure black reflects the most light therefore does not forgive. It’s all an illusion I guess eh! Great content take care!
This guy showing paint work in a booth is useless the environment in a paint booth is the same every time ..... Not everyone has a paint booth and with different temps/humidity so the paint/clear gasses off slower or faster ..
How is it useless? Majority of people who paint cars do it in a booth. If you are doing a show car and want a perfect finish you must be in a booth or some kind of area that is self contained, very clean, with air flow for over spray. Without air flow you will have over spray right over top of everything you just painted. Especially when you go to clear coat.