Hello, I love watching your videos. I went to hvac trade school. I got my G2 ticket. I didn’t learn much from the school, but I have learned from your videos. Would you be able to make a video on ac how to top up the low Freon. Thank you so much. Really appreciate your time and effort of making great videos. Toronto, Canada 🇨🇦 😊
I have this same unit except mine is a 6 burner and this is by far the best information on RUclips. I knew most of this information except for the limit switch and how to adjust a gas valve. I hope you do a video on exactly what to look for on checking a heat exchanger. I just had an elderly neighbor where the burners were not lighting up even though the inducer motor was coming on. I checked the pressure switch by using an ohm meter while putting suction on the tube (unplugged of course) and it was good. I kept sticking a drill bit back in the inducer motor's port to make sure it wasn't blocked but it still wasn't pulling suction. I finally took the inducer motor off and there was a large mud dauber nest that was apparently falling back down every time I took the drill bit out. I would never charge my neighbors for anything I can do to help. So these type videos really do help people out more than you know. Just subscribed.
I love the way you show in depth the trouble shooting and helping anyone out is differently rewarding when i did service work it was a great feeling helping people in need getting someone back in heat in the middle of a cold Wisconsin night is almost like a high!! if you haven't done it try it! Thanks for your videos
Wow… you’re very knowledgeable and excellent instructor. You’re helping me save some money for sure. For that reason, I am subscribed to your channel. Great job and keep up the work!
I have no question, I just want to say thank you , I’m new hvac student and I’m from Atlanta. I think I watch all ur videos , ur video helps a lot bc of ur videos it makes hvac school a breeze 🙏🏻🙏🏻🙏🏻🙏🏻, when I make money and get my license I will give back to the community, 🤝
Great video! I’ve been working as a commercial tech for over a year now and mostly self taught. Your videos and a couple of other channels I watch have really helped me. Bravo!
Hey man! Just want to say I’m on my 4th week as an hvac tech. This video has helped a ton and is such good info. Thank you for doing these videos! I’m learning a lot! Keep it up!
I like the patience and attention to details on components in order. Lotta guys jump around or right to the issues but not the cause. Wish I had access to tech tips like this when I started out. Keep em comin!
Thanks for sharing your knowledge you are a honest person we have a service guy doing our hot water boiler in our condo building saying the set temperature is not holding and it shuts the boiler off I wonder what's wrong
Great video where were you 25 years ago when I started working on HVAC equipment so glad to see a Vectren technician taking the time to show the Next Generation how to do it right appreciate you taking the time thank you
I once had my gas heater not start some years ago with a pressure switch error. It turned out the port on the switch had a blockage. Since then, every October I put a straightened paper clip in the port to make sure it stays clear. I also keep a spare hot surface igniter and blower capacitor around in case I need them.
Thank you! It's har to find honest people now days.. Ps. I don't mind to pay but no days we get overcharged and lied about parts etc.. Thank you again!
Thanks Taddy as always, for bringing us another great video. I wish you had a school here in Houston to take the training. Thanks to your videos I have done some maintenance here at my house and even replaced a faulty board, of course I follow safety first. You have no idea how much $$$ I have saved. Thank you sir and keep up the good work.
I brougth a conversion kit from the repair clinic, didn't have the propane pressure spring and can't find a new one I assume that they are the same on all propane gas valves? I like you video's and you seem to be a good down to earth person thanks for the information!
Thank you for helping a person in need. Question about the configuration of the gas piping. The orientation of that tee is really doing nothing using the branch as a dirt leg. Correct ? Realize given what you had to work with that would have complicated things to redo. Appreciate you sharing your knowledge.
Hello my brother tha ls for your video thanks to share ur knowledge it's the first do I watch ur video u are amazing ..q DIOS t bendiga a ti y ru Familia!!
Great video dude. I'm glad you addressed the drip leg because I was thinking it when you were taking the pipe off. Also I just use a paper clip to clean the orifices. I deal with a lot of propane and oil where I work. This video was good for me to watch because it keeps me aware of things to pay attention to and not to overlook since I do it so often.
You are supposed to apply pipe dope (thread sealant) over top of the Teflon Tape, and always leave the first two threads bare, especially on a sensitive component, such as a diaphragm gas valve.
Hi Mr. Taddy,thanks for the great work you are doing to share the knowledge and skills you have in the HVAC field,am Godfrey from Uganda but currently in Mogadishu working,how can I be helped to acquire EPA licence? Am your follower on RUclips.
Man that was a great video! I actually sent it over to my email for review when I go through any issue's in the future! I am a service maintenance technician but I saw you had gas pressure for propane at 11! What about gas? 2 That should the pressure be adjusted to or at for gas??????? Thank u junior O. From Chicago Ill.
Boa Noite sou daqui do Brasil tira uma dúvida esta parte que faz o aquecimento do gás, não corre o risco de explosão quando for fazer brasagem? Parabéns
You good man .. taddy I’m Studying on gas water heater I’m from El Salvador but I live in Gadsden Al I have Mexican restaurant business and I’m trying to maintain my equipment I have Mexican restaurant businesses and I try to maintain my equipment I have a Rheem gas water heater G100 and I been having trouble
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
We need more people like you around here where I live. I love your videos. God bless you
Wow, thank you
Very nice of u helping the mate out in his time of need. You hardly hear of that anymore
NEW JERSEY HVAC since 1985.... Good vid... The spring swap was golden.... Scrap yard great idea...
The best hvac guy on RUclips. The way you explain things is just so helpful. I appreciate tf outta you Ted !
Your a stud my guy. Helping out somebody and figuring out how to get paid with a video. Then simultaneously training a youngster. 👍
This man is a legend! Thank you for allowing us take part in this lesson!
I'm here to help my brother
Thank you so much for watching the videos. Please share the videos when you have time
Your Giving will come back to YOU! I thoroughly enjoyed Every minute of this video! Thanks!@@TaddyDigest
Thank you 🙏 for making great videos. God bless you!!!
Toronto, Canada
You're welcome thank you so much for watching
Hello, I love watching your videos. I went to hvac trade school. I got my G2 ticket. I didn’t learn much from the school, but I have learned from your videos. Would you be able to make a video on ac how to top up the low Freon.
Thank you so much.
Really appreciate your time and effort of making great videos.
Toronto, Canada 🇨🇦 😊
Thanks for sharing and helping the poor,❤❤❤❤❤❤❤ from New York.
Thanks for watching!
I have this same unit except mine is a 6 burner and this is by far the best information on RUclips. I knew most of this information except for the limit switch and how to adjust a gas valve. I hope you do a video on exactly what to look for on checking a heat exchanger. I just had an elderly neighbor where the burners were not lighting up even though the inducer motor was coming on. I checked the pressure switch by using an ohm meter while putting suction on the tube (unplugged of course) and it was good. I kept sticking a drill bit back in the inducer motor's port to make sure it wasn't blocked but it still wasn't pulling suction. I finally took the inducer motor off and there was a large mud dauber nest that was apparently falling back down every time I took the drill bit out. I would never charge my neighbors for anything I can do to help. So these type videos really do help people out more than you know. Just subscribed.
God bless you as well. I like that and I do the same all the time! I've been a auto car technician and always helping ppl out
I have been in Service for almost a year now and your videos sure do help me out bud. Thanks man
Glad to help
Please make a video on how to clock the gas meter.
Okay deal
I love the way you show in depth the trouble shooting and helping anyone out is differently rewarding when i did service work it was a great feeling helping people in need getting someone back in heat in the middle of a cold Wisconsin night is almost like a high!! if you haven't done it try it! Thanks for your videos
Thats good therapy. Helping others out. Good for the soul. Ive never felt bad Helping others in need. Great work mate
I agree 100%. Thank you so much for watching
Hey taddy man u really know a lot about those units and good to see your passing the knowledge along keep up the good work
I'm glad you watched the video on my friend. I'm definitely gonna keep trying to teach those who never had what I needed when I was getting started.
More to come!
I am currently in HVAC Certification 1 classes.
This is legit.
Excellent. Thank you so much. I'm glad you enjoyed the video. Please share the video and support
Taddy! excellent video sir! Thank you for your knowledge!
you're welcome. I am so glad you liked the video
thank you for watching 👀 😀
please share the video if you want
Another good training, brother! Gracias!!!
You are a good men.helping someone that need help
Great video.. Especially what you said at end Taddy 👍🇺🇲🇺🇲
Right on
God bless you brother that was a good and powerful message at the end
Thank you for sharing the informative video ! A lot to learn from this video
Great Taddy learning a lot with your videos
Wow… you’re very knowledgeable and excellent instructor. You’re helping me save some money for sure. For that reason, I am subscribed to your channel. Great job and keep up the work!
Thanks! I am glad this video was helpful.
Helping others in need says a lot about you , you're a good tech and a nice person. God will pay you back 10 fold greetings from California
Thank you so much
Your a good person. God bless brother
I thoroughly enjoyed your vast experience . I could pick your brain all day with follow up questions.
Glad you enjoyed it!
Awesome job! Helping those in need.
Always!
The Best sequence of operation class on a furnace,good job amigo I appreciate u,happy Holidays 😀
Thank you my brother
I really appreciate your kind words and I appreciate you watching the video.
I have no question, I just want to say thank you , I’m new hvac student and I’m from Atlanta. I think I watch all ur videos , ur video helps a lot bc of ur videos it makes hvac school a breeze 🙏🏻🙏🏻🙏🏻🙏🏻, when I make money and get my license I will give back to the community, 🤝
You are so welcome
Taddy you are the Man..! Not just educating others. Also helping a deserving customer in difficult time.
Keep the good work going,,,👍
Thanks 👍
Excelent video Taddy n Merry Christmas
Same to you!
Excellent, Very helpful. Great attitude. Maintenance guy Colorado. Thanks for the info .
You're welcome.Thank you so much for watching.I'm glad the video was helpful
Thank you, this was very helpful
Great video! I’ve been working as a commercial tech for over a year now and mostly self taught. Your videos and a couple of other channels I watch have really helped me. Bravo!
Awesome news so glad to hear
Thank you so much for watching
Excellent explination. i will be joining you.
Hey man! Just want to say I’m on my 4th week as an hvac tech. This video has helped a ton and is such good info. Thank you for doing these videos! I’m learning a lot! Keep it up!
Great to hear!
I like the patience and attention to details on components in order. Lotta guys jump around or right to the issues but not the cause. Wish I had access to tech tips like this when I started out. Keep em comin!
Thank you my brother
What a guy! Been in the trade for about 10 years. You are doing it right bro. Great video.
HELL YEAH!🔥 Furnace Repair Videos! 🔥 Keep’em Coming. 🤙
You got it!
Good training video for diy person and students
Thanks for the information brother. I’m an Installer from Cali for a year and a half as of now so, these videos help me understand what I’m installing
Right on
Awesome video. Love seeing good people in this field of business. You're the man!
I appreciate that!
I love that pipe dope it never hardens in the winter like pro-dope does here is the frosty North of Canada
Thanks for sharing your knowledge you are a honest person we have a service guy doing our hot water boiler in our condo building saying the set temperature is not holding and it shuts the boiler off I wonder what's wrong
Great video where were you 25 years ago when I started working on HVAC equipment so glad to see a Vectren technician taking the time to show the Next Generation how to do it right appreciate you taking the time thank you
You're welcome my friend i'm glad to be here
I once had my gas heater not start some years ago with a pressure switch error. It turned out the port on the switch had a blockage. Since then, every October I put a straightened paper clip in the port to make sure it stays clear. I also keep a spare hot surface igniter and blower capacitor around in case I need them.
Thank you!
It's har to find honest people now days..
Ps. I don't mind to pay but no days we get overcharged and lied about parts etc..
Thank you again!
Thank you so much Taddy. You are the best. Thank you again for helping
You're welcome I'm glad that I was able to help you my brother.
Respect man, you know so much stuff !
You warm my heart.
You’re awesome brother!…great explanation!!…God Bless You!!
I'm here to help my brother
Thank you for being here
Thank you for watching
Thanks for shareing these useful videos of HVAC Gas heat.
I agree you have to adjust your price do to situation. I work in Newport Beach there prices would not work for back east
Love your videos. Thanks for sharing your knowledge and experience. Worth it's weight in gold for sure. Glad I found your channel!
Awesome, thank you!
thanks Tadd great video
You're welcome, brother.Thank you so much for watching
Thanks Taddy as always, for bringing us another great video. I wish you had a school here in Houston to take the training. Thanks to your videos I have done some maintenance here at my house and even replaced a faulty board, of course I follow safety first. You have no idea how much $$$ I have saved. Thank you sir and keep up the good work.
you're welcome my brother glad to hear 🙏 🙌 👍
Knowledge is power
you are good , we need more people like you. many only think about charge more money.
Thank you brother, u r the best.
You're welcome my friend
Great video thank you for taking the time to share with us 😊
Gracias por esos contenidos, a mi me an ayudado mucho tus videos. Dios te bendiga siempre.
Hi taddy thank you so much.
You're welcome my friend please share the video when you can
Great Info thank You 🙏 😊 for Sharing
Big Taddy! Great video!
Big thanks
Muy buen video ! Felicidades y por eso Dios te bendice con más trabajo 🙏
Gracias mi hermano
EXELENT explanation
Thanks!
Thank you as well
I really appreciate your support
AWESOME love
These type of videos.
Do more like these
More to come!
very nice explanation... God bless you
Thank you my brother
I brougth a conversion kit from the repair clinic, didn't have the propane pressure spring and can't find a new one I assume that they are the same on all propane gas valves? I like you video's and you seem to be a good down to earth person thanks for the information!
Great job taddy very informative thanks for the video
Any time
This guy is the best
Thank you
You're welcome
Great work tad
Thank you for helping a person in need. Question about the configuration of the gas piping. The orientation of that tee is really doing nothing using the branch as a dirt leg. Correct ? Realize given what you had to work with that would have complicated things to redo. Appreciate you sharing your knowledge.
Hello my brother tha ls for your video thanks to share ur knowledge it's the first do I watch ur video u are amazing ..q DIOS t bendiga a ti y ru Familia!!
I’m finding a lot of the ports where the pressure switch goes to become loose. Trane and Rheem products
thx for this video enjoyed it, I see your from Iran
Love that liquid tight drain line 😂
Very good video and nice splendid thanks for
So nice of you
Good man for helping him out, hope good Karma comes your way. Great information.
Great video dude. I'm glad you addressed the drip leg because I was thinking it when you were taking the pipe off. Also I just use a paper clip to clean the orifices. I deal with a lot of propane and oil where I work. This video was good for me to watch because it keeps me aware of things to pay attention to and not to overlook since I do it so often.
Good tip Paper clip is a good tool for cleaning those
❤❤❤❤❤❤You are the best thank you so much ❤❤❤❤Excellent work waooo ❤❤❤❤❤
You're welcome 😊
Awesome trainer!!!!
Thank you 🤗
very good info
Thanks
Thank you so much you are awesome
Thank you so much good explanation.
You're welcome my brother
You are supposed to apply pipe dope (thread sealant) over top of the Teflon Tape, and always leave the first two threads bare, especially on a sensitive component, such as a diaphragm gas valve.
Great point!
@@adamshebel2320 some of it can get sniped off while threading the pipe in, which could cause a failure in the system.
No you don't have to apply thread sealant.
Is there a paddle switch to detect Air movement?
No. The pressure switch is responsible for reporting whether or not the inducer motor is running.
Hi Mr. Taddy,thanks for the great work you are doing to share the knowledge and skills you have in the HVAC field,am Godfrey from Uganda but currently in Mogadishu working,how can I be helped to acquire EPA licence? Am your follower on RUclips.
Wonderful video. Awesome dude.
Thanks a ton!
Hello Taddy , i just started following you about 4 weeks ago and your videos are very helpful, thank you so much,🎉 what happened to your finger?
Well done. 100%
Man that was a great video! I actually sent it over to my email for review when I go through any issue's in the future! I am a service maintenance technician but I saw you had gas pressure for propane at 11! What about gas? 2
That should the pressure be adjusted to or at for gas???????
Thank u junior O. From Chicago Ill.
I'm glad the video was helpful.Thank you for watching
Natural Gas 3.5
Wow much respect!!
Boa Noite sou daqui do Brasil tira uma dúvida esta parte que faz o aquecimento do gás, não corre o risco de explosão quando for fazer brasagem? Parabéns
You good man .. taddy
I’m Studying on gas water heater
I’m from El Salvador but I live in Gadsden Al I have Mexican restaurant business and I’m trying to maintain my equipment
I have Mexican restaurant businesses and I try to maintain my equipment
I have a Rheem gas water heater G100 and I been having trouble
Taddy how can I get more training videos from you
I'm an HVAC student...came across you for the first time! Awesome vid!
Awesome! Thank you!
Another nice video 👍💯
Thanks for the visit