Absolute perfection Braddah!!! Wow! 😍 Any way you'd sell me the Z06 wheels? I have 2000 Camaro SS 30K OG Miles with Stock wheels and Nitto NT555G2 in front and NT555R2 in back.
Please help, I have TSP 228/228 600/600 112LSA cam kit 660" dual valve spring kit PRC titanium retainers TSP 7.400 pushrod kit TSP rocker trunion upgrade kit w/intake exaust valves on stock non-ported heads. Also, 102mm TB with FAST intake. I need some down low HP/TQ. I have the $ for heads and fuel pump. I heard RHS cylinder heads.matches with FAST intake. But what about my cam?
Do you have the part number for the rear wheels? I can’t find that offset on their website. I’ve been looking for a deep dish for the back just like yours and I can’t find them😞
I love this type of paint. Usually I see cars with a wrap that goes for this, but it doesn't quite work. This is unexpectedly stunning, looked great from every single angle in the video to my surprise. Is this a brand paint or a custom mix at a paint shop, and if so where was it done?
WORST VIDEO EVER!! Why? You forgot to peel the stupid tire stickers off! Only a psychopath would do that! 🤣🤣🤣 Honestly, great video and that setup looks amazing on the car. Only thing I would have liked to see better was the fender /tire fitment. Do the tires sit flush, poke, or sit just inside the fenders? I've always wanted to get these wheels myself. Thanks for sharing all the sizes and wheel spec info, enjoy!! 😁💯💯💯
Absolute perfection all around!
Absolutely awesome man! car looks beautiful and sounds just as good.
Omg I love when people do things the right way, I’m late but congratulations that’s amazing 💯💯
Thanks brother🤙
GORGEOUS TA, Braddah!! Come to Denver this summer, let's roll! Much Aloha my dood!! 🤙🏽
🤙
Nice!!
im jealous brother the good kind of jeaulous tho love ur whip
Nice
Only thing it needs is dual tips for the back. Fills that gap up for the exhaust. But a beautiful car no doubt
Yeah, they were on the car prior to the straight pipes.
What’s offset and what tires size u go with? Beautiful car
Drives off with the garage door open😂
That color is amazing. What part of Michigan?
Absolute perfection Braddah!!! Wow! 😍 Any way you'd sell me the Z06 wheels? I have 2000 Camaro SS 30K OG Miles with Stock wheels and Nitto NT555G2 in front and NT555R2 in back.
And we need pictures of the engine bay next time!
In the next few videos I will have to show it off!
@@chamleebros I'd love to see it. I've owned fourth gen Firebirds for 23 years and currently have 4 of them, but your TA wins the best paint job.
Nice ! Im in the market for a tran am . Couldn’t find a decent price 😢
Definitely had to subscribe after seeing that, glad you put the wheels specs in there dude that sh*t’s confusing. Btw what springs are you on?
Hell yeah dude! But I just purchased viking coil overs.
Beautiful ride dude! That Procharger sounds awesome. What's your build if you don't mind me asking?
11.3.1 LS with an F1A-94
Fucking sick car love it
🤘
What size of rims and tires you had on stock on this Pontiac before you purchased the new ones?
17x9 are stock WS6 rims with 275/40/17 tires
Are you selling them when you go beadlocks?
Please help, I have
TSP 228/228 600/600 112LSA cam kit
660" dual valve spring kit
PRC titanium retainers
TSP 7.400 pushrod kit
TSP rocker trunion upgrade kit w/intake exaust valves on stock non-ported heads. Also, 102mm TB with FAST intake. I need some down low HP/TQ. I have the $ for heads and fuel pump. I heard RHS cylinder heads.matches with FAST intake. But what about my cam?
Just curious, will this wheel and tire setup fit stock rearend and stock suspension? Very nice TA by the way.
Yes it will fit a standard f body rear end ,but you will have to roll the fender lips and massage the inner wheel well a little.
Okay, thanks
Can you verify the wheel size including offset as well as the full tire size
What's needed to avoid doing anything to the fender or wheel well?
What town in Michigan you live in im in Ionia
What’s the setup?
What modifications do you have on the motor, new to your channel. Love it but i am bias to trans am.
We will be doing a build bio on each of the cars for the channel. Stay tuned.
Beautiful TA! Is that paint or a wrap?
Its a Pearlescent paint, thanks for the question!
What mods if any did you have to do to get them to fit? Do they rub?
No rubbing but I rolled my rear fenders.
Hey man love the wheels was looking at your aftercooler setup and wanted to see if i could get some info if possible thanks
What's up?
Was curious on which aftercooler you were running as i want to get rid of my twins lol@chamleebros
Do you have the part number for the rear wheels? I can’t find that offset on their website. I’ve been looking for a deep dish for the back just like yours and I can’t find them😞
No but I listed the specs in the video.
Love your car gorgeous, is that a wrap?
It’s paint and about 15 years old!
Is ur car wrapped or painted
I love this type of paint. Usually I see cars with a wrap that goes for this, but it doesn't quite work. This is unexpectedly stunning, looked great from every single angle in the video to my surprise. Is this a brand paint or a custom mix at a paint shop, and if so where was it done?
I could of sworn i saw an undermount turbo kit?
I love all power adders but it’s a procharger car!
How manny inches r u lowered?
I have an Eibach spring kit which lowers the car approximately 1.2".
WORST VIDEO EVER!!
Why? You forgot to peel the stupid tire stickers off! Only a psychopath would do that! 🤣🤣🤣
Honestly, great video and that setup looks amazing on the car. Only thing I would have liked to see better was the fender /tire fitment. Do the tires sit flush, poke, or sit just inside the fenders? I've always wanted to get these wheels myself. Thanks for sharing all the sizes and wheel spec info, enjoy!! 😁💯💯💯
🤘
when every Trans Am has Welds, Welds become really fuckin boring and basic.. but hey its your money
Beautiful car man, where are you from? NW Burbs of Chicago here.