WS6 Trans Am Gets All New Speakers From Kee Audio. (Huge Upgrade!)
HTML-код
- Опубликовано: 5 мар 2023
- WS6 Trans Am Gets All New Speakers From Kee Audio. (Huge Upgrade!)
Want TWA Motorsports Merch? Go to www.twamotorsports.com and pick some up!
Parts Used
Kee Audio Stage 3 Kit www.keeaudio.com/transam.html
Tools Used
Plastic Pry Tools amzn.to/3mxPaFC
Audio Connecters amzn.to/3mxPaFC
Rivet Gun amzn.to/3kOor6W
Wire Stripper amzn.to/417aXna
Heat Shrink amzn.to/3xBzDGO
Electrical Tape amzn.to/3IARWSJ
Soldering Gun amzn.to/3KgmE52
Solder amzn.to/3IcEi78
Impact amzn.to/3YA4e3v
Gloves amzn.to/3xSLSiF
Other Parts on the Car
Head Unit amzn.to/3lOfNFO
Wiring Harness(2 Would be best) amzn.to/3k5RsLg
Steering Wheel Control Harness amzn.to/3YHBu95
Antenna Adapter amzn.to/3KktHJX
Face Plate amzn.to/3S8X83z
In this video I am going to show you how to properly install a kee audio stage 3 kit in my son's Pontiac WS6 Firebird Trans Am. Kee Audio has been designing custom options for the fbody for years and has it down to a science. If you are looking to replace your factory monsoon or bose speakers in a Camaro Camaro SS Firebird Formula Trans Am WS6 or any F-body for that Manner you need to look at his website for speakers. He has put together some of the best audio or car stereo on the market for the 4th gen fbody. These cars are to the age that even if they are low miles the speakers just fall apart. It isn't a matter if but when you will have to replace the speakers. Why not upgrade to something that sounds way better. I may have to do my Trans Am WS6 at some point. Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Want to Send Stuff
TWA Motorsports
PO Box 190
Aurora MO 65605
Subscribe and Follow TWA Motorsports
RUclips: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/3FMXiI3
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/3HQuDVf
Photo editing amzn.to/3HQuDVf
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission. 
Авто/Мото
Hey travis, while you have the door panels off. Remove those top staples, drill the holes out and use zip ties to hold them together. The staples are what cause the panels to crack. Won’t let the plastic flex in weather changes. I did it to mine to prevent those infamous door cracks.
In the process currently
I have a video with pictures on my channel on how to fix this as well.
ABSOLUTELY do a experimental door panel vid, every panel out there is cracked so it will be your most watched vid so make it good! On another note, do you think the baffles would do good with the CDT sail panels here, I'm afraid that filmsy rubber would reverberate. Do you think that is a non issue or not?
Its a pretty good product. I think it compliments any speakers
last question and I'll be done: I've been defeated by the hangar hooks, I'm trying not to get too aggressive obviously so I don't mar things up but the lil plastic piece in the middle of the hangar hook doesn't come all the way out right? it just releases some loosening up the plastic hook to be pulled out? Am I correct in this assumption? @@TWAMotorsports
Unfortunately it is sold now
A nice sound system is a plus in any vehicle. When I was his age the stereo and speakers were the first thing to get replaced in my vehicle! But being his age in the 70's there was a lot of awesome music to listen to on the radio and 8 track tapes. ✌🏻
Me too but now I barely listen. Lol.
Very excited to see this come out
Its nice stuff
very nice! ...ian kee from kee audio is an awesome guy to do buisness with... & cdt is "top shelf" ...head & shoulders above any of the big box store brand names... ive had my kee audio set up, a level 5, a 10 speaker kit with a 10" custom built sub/box kit as well, for several years now & as a guy whos been in the music biz for 35 years i can tell ya, its My Dream System! ...& its always good to see more f-body content, so thank u sir
I have noticed that everyone seems happy with his options
To funny, I just did this on my customers' ws6. I got rid of the factory crap amp threw in the mini alpine pack amp. Alpine Separates in the doors with Coaxles on the sides since I had already added an alpine sub in his side hatch. Ofcourse Prior I did his pioneer head unit with a backup camera. 😂 He kept me busy, lol. Great job on ur installation. 🤘🤘
Thank you. How was the alpine set up?
What a beauty. I always wanted a late 90s early 2000s Pontiac T/A
Thank you. They are good looking cars.
Hey Travis, nice job on the install. I installed the same set in my 00 Camaro SS, and they were a big improvement over the stock speakers and the fitment is spot on. You could have saved yourself some time and effort by not taking off the sail panels, and instead popping off the speaker grills, unscrewing the stock speakers and dropping the new ones in. Would also recommend adding some sound deadening in between the speaker mount and the body to eliminate sub vibration.
I may do sound deadening down the road. I don't like popping out the grilles on the them. Always a chance of breaking with the age of the plastics
interesting work around on the tweeters in the doors
Having to think outside the box
Thanks for doing this video, I'm starting on mine right now.
The 98 TA has the same fitment issue in the door basket. Trimming now...
Nice
I figured that probably didn't change things
Nice job on the speakers install.. looking peeeeeerfect 👍.. the door panel cracks on your son's Ws6 is a common issue.. my 94 TA door panels surprisingly is not cracked anywhere on each side... However they do need to be repainted again just because of the outer seatbelt rubbing into the plastic over the yrs.. as seen on my Instagram page.. I think down the road after I get mine up and running I'll have mine professionally painted with that plastic texture paint.. but for me now my motor and transmission is first priority..👍
Yeah these door panels suck!
@@TWAMotorsports indeed... I see another white Lambo in the background..
Same one. Older video
@@TWAMotorsports 10-4
I miss my Firebird. I had an 02 and put a 10 inch woofer in the rear it sounded so so good hitting off that glass. No rattles at all. I had the hatch cover so even when you look inside the car you couldn't see anything. (No tints)
They are a timeless look
Thanks for this video, I have planned to buy the same system from Kee Audio for some time. $400-odd for that system is really reasonable. We just returned from a long road trip in our 1999 Firehawk, and I was thinking I would like to install some sound insulation in the hatch area (which seems to be where the lions share of the road noise comes from). While you have the interior and panels off, you should install some Dynamat, so you can actually hear your new speakers!
This car is sold now but sound deadening is a great idea.
good to know Kee Audio is still around... will probably upgrade my Camaro's system this Spring/Summer
Yeah they have been doing it a while
Picked up a speaker package from Kee last summer. Great set of speakers. Also, I'd suggest while you're in there, install the Autotrix window motor fixes too.
@@Shmeat28 cool will do :)
I will check that out
THANK YOU THANK YOU THANK YOU!!!!!!!!!!!! I NEED THIS FOR THIS SUMMER! YOU JUST ANSWERED MY PRAYERS!!!!!!! My brother, this is just what the doctor ordered, especially with summer right around the corner! I just knew there was a kit somewhere! Thank you so much!!!!!!
It sound great!
I think so too
Try it man....fixing the door panels. Such a shame with these cars is the door panel cracks and sometimes the dash cracks. Im as ocd as you are so id like to see how you go about trying to repair it and also them door panels are getting really pricey and that's if you can even find some perfect one's. As always great video and keep up the great content...
It isn't going well. Lol
Great video I’m thinking of doing the level 5 system the trunk sub and a new deck in my 93
Thank you. It's great stuff
Yeah I’d like to see the door panel video!
I am not sure of that. Going bad currently
I have one on my channel if you're interested!
Just an FYI on the fitment of the door speakers in the cradles. I swore up and down also that the speakers would not go in. Watched the video that he says they do but I think its light on showing just how to get them in. So I took that as a challenge. It really just takes some forcing them in. It does sit against and deform the back tray along with basically deforming the complete cradle. I am thinking of getting a few sets so when these explode into a million parts from stress, I have a backup set that I will cut apart and a backup set to that set. I think the way I finally got them to sit was I would screw in two opposite screws and tighten them down and then take them out and do the other set of screws. in doing this I think it started to widen the cradle. I then did two opposite screws just barley started and then pushed down one of the other sides and got a screw in. Tighten them all down and then backed them out and repeat with the other side until the cradle will let you get all four screws started and then just tighten them all and it goes in. I found though that the speakers lip seems to be larger and the whole in sits inside of the door panel is not large enough, so my door panels do not want to sit flush on the fronts.
Yeah it was a definite force. Lol
I went with NVX components in the doors. I haven’t messed with the rear seat speakers or the hatch yet. My 5 yo is in love with the car and her head is right beside those midrange speakers in the rear seat. I would like to find a way to quickly turn them on and off when she is back there. I’ll have to give Kee Audio a call for some replacements for the hatch area!
Nvx has been good in the past for me too
Thanks for the video. Was wondering what the wheel and tire setup on the Trans am?
Thank you. Deep dish zr1 wheela. 17x11 and 17x9.5
I've seen the door panels repaired then wrapped in leather. Looks great.
Wrapped is probably the best option
@@TWAMotorsports mine were repaired and wrapped, Looks great ! My driver side was cracked all the way through as well.
Nice
Hey Travis. Love all the vids. So helpful. Had a question about my 00 Camaro SS. Was planning I. Speaker upgrade but while I was in there my window is a little sluggish, and most times will only go up 6” or so at a time. After a minute or two it’ll go another 6” until finally up. New actuator/motor? Wanted to see what you thought. Thanks man.
Yeah probably about time for a window motor
Great video well done gents! Stupid question, do you guys recommend any good quality FM Bluetooth transmitter? Reason why is I am considering getting collector plates which will require me to keep the factory GM Delco Monsoon CD player (no cd changed) head unit on my 97 Firehawk. I got the trunk and rear speakers done, just the door speakers tweeters left. Thanks!
Thank you. They are all about the same. I did a video on my sonoma GT with one we still use.
Can you tell me what your red shop chair is and where to get one......love the Firebird content.
Just bought a '97 convertible, just a plain V6 car, but I have to start somewhere. Had a '87 GTA back in the day.....kick myself for letting that go but I'm back in the Firebird scene now. THANKS!!
I am not sure they have them anymore. I used to post a link but can't find them now.
@@TWAMotorsports BUMMER!!!
I know. It's the best gift my wife ever bought me
I'd like to see the door panels I have a cracked in one like that !
May or may not happen
Great video, but what I needed to see most wasn’t there. Did you replace the rear tweeters in the hatchback trunk area? And what did you do about the factory amp? Im being told you have to bypass it and add an aftermarket amp if you use aftermarket speakers. I have a 93 Trans Am with the 10 speaker system (pre-monsoon). Ive done car speakers before but never with amps
I didn't bypass rear tweeters. These speakers are made for factory amp which is still in place.
@@TWAMotorsports thank you!
You're welcome
What was the speakers kit and stereo. I want to upgrade my 98 trans am sound system as well. I am like you like to keep it original look as well.
Link in video description
Let's do the door panels it's a big problem, and nobody is reproducing them yet!
After starting that process I am not sure about it
There is a company that makes a skin cover for it not sure how it looks.
I have seen that
There is a big market for these cars but nobody is taking a bite at it. Whoever actually takes the chance is gonna be rich asf.
Maybe right
How did u use after market radio with monsoon factory amps?
Pretty common
Hi Travis, do you have the link to we’re you bought the speakers? Thank you
Yes in video description
Wil this speaker setup work with the stock monsoon head unit?
Yes
hello! just curious what size rivets did you use ?
Not sure. Had several
I’ve literally had more than 5 f bodies and I kid you not. I NEVER KNEW there was a spare tire!!!!!!!!!
Lol. Most are gone.
@@TWAMotorsports or too old to be reliable.
True
My 2001 driver side power window is out. Can’t find a power regulator anymore. Do you know where I can find a new drive side regulator.
No idea.
Is there a replacement for the 4 wire plug that goes into the sail sub? I can’t find one online and mine is not in the car.
Doubtful new
@@TWAMotorsports I just went to the junkyard and pulled every connector
Thats the best option
Did you leave the factory tweeters in the trunk?
Yes
Question why didn't you just cut it to fit 6x9s?? That's what I'm thinking of doing.
Didn't want to cut
I'm going to be upgrading my system in my 95 RS Camaro with the Bose system next month. Found out the hard way you can't just change the speakers and then the head unit without bypassing the amplifiers. Anyone know if the consoles from the 97 and up will fit into a 95 without tons of modifications? I don't really see why it wouldn't unless there was some dramatic different in the floor pan. I know the dash is different and hoping that's not an issue.
Travis, do you have a part number for window felts?
I don't think it will line up with the dash correctly
Sound deadener and the front door speakers you should of cut that plastic off only whatever is hitting the magnet. In time from door slamming the screws will crack the plastic
I may go back and do that
lol, pop is cheaping on $400 ( with a Lambo in the garage ) and here I have $2k+, just in my Focal Mids & Highs 🤣
Great video though 👍
Bank owned. Just a Caretaker
@@TWAMotorsports TRUTH, lol 👍
Lol
Another vote for fixing the door panels if possible. If not, I understand.
It is getting ugly on the attempt
I have it on my channel if you're interested
Hello, Is Kee Audio closed down? I have been trying to get ahold of them with no luck.
No idea
I can’t believe you guys took the sail panels you to do that… the grill just pops off.
And you risk breaking the 20 year old plastic
@@TWAMotorsports I have one, I’ve owned my 2002 ws6 since new and they are in great shape. The issue is how every one of these door panels are cracked in the same spot lol. My car has only 40k on the clock and it still happened.
Yep. It happens. My 77k mile ones are good
Oval or round speaker
Round
Wheels on this car?
Zr1 replica
Lines up for the most part….can’t get 3 corners to line up 😂😂😂
Stop what you are doing with every other project you have and finish the RED WS6!!!
….pretty please…
Waiting on a transmission currently